zephyr/boards/lairdconnect/bl654_dvk/bl654_dvk_defconfig

# SPDX-License-Identifier: Apache-2.0


# Enable MPU
CONFIG_ARM_MPU=y

# Enable RTT
CONFIG_USE_SEGGER_RTT=y

# enable GPIO
CONFIG_GPIO=y

# enable uart driver
CONFIG_SERIAL=y

# enable console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y
CONFIG_RTT_CONSOLE=y

# 32kHz clock source
CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y
CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM=y
license: cleanup: add SPDX Apache-2.0 license identifier Update the files which contain no license information with the 'Apache-2.0' SPDX license identifier. Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of Zephyr, which is Apache version 2. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2019-04-06 15:08:09 +02:00			`# SPDX-License-Identifier: Apache-2.0`

boards: bl654_dvk: Add BL654 DVK board Add the Laird Connectivity BL654 DVK board to zephyr. Signed-off-by: Ryan Erickson <ryan.erickson@lairdtech.com> 2019-02-11 17:45:05 +01:00
			`# Enable MPU`
			`CONFIG_ARM_MPU=y`

			`# Enable RTT`
			`CONFIG_USE_SEGGER_RTT=y`

boards: Enable GPIO by default on boards with nRF SoCs This patch enables the GPIO driver by default on all boards equipped with an nRF SoC (all boards having `CONFIG_SOC_FAMILY_NRF=y` in their `_defconfig` file). In vast majority of cases the driver is needed, so it is more convenient to enable it at board level than in particular applications. And if the driver is undesired for some reason, it can be still disabled in the application config. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no> 2019-03-27 09:35:11 +01:00			`# enable GPIO`
			`CONFIG_GPIO=y`

boards: bl654_dvk: Add BL654 DVK board Add the Laird Connectivity BL654 DVK board to zephyr. Signed-off-by: Ryan Erickson <ryan.erickson@lairdtech.com> 2019-02-11 17:45:05 +01:00			`# enable uart driver`
			`CONFIG_SERIAL=y`

			`# enable console`
			`CONFIG_CONSOLE=y`
			`CONFIG_UART_CONSOLE=y`
			`CONFIG_RTT_CONSOLE=y`

			`# 32kHz clock source`
			`CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y`
kconfig: Remove assignments to promptless SOC_FAMILY_NRF symbol SOC_FAMILY_NRF has no prompt. Assignments in configuration files have no effect on symbols without prompts. A prompt means the symbol is user-configurable. SOC_FAMILY_NRF is instead enabled indirectly through being selected by other symbols. Detected through some work-in-progress improved error checking. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2019-11-15 00:43:24 +01:00			`CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM=y`