zephyr/dts/bindings/phy/usb-nop-xceiv.yaml

# Copyright (c) 2018, Yannis Damigos
# SPDX-License-Identifier: Apache-2.0

description: |
    This binding is to be used by all the usb transceivers which are built-in
    with USB IP

compatible: "usb-nop-xceiv"

include: phy-controller.yaml

properties:
  "#phy-cells":
    const: 0
dts: bindings: Add yaml files for PHY subsystem Add yaml file for initial support of USB PHYs. It adds also yaml files for STM32 USBPHYC and USB controllers with embedded PHY. PHY refers to the physical layer which is used to connect a device to the physical medium e.g. USB controller. Origin: original Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> 2018-10-03 14:58:29 +02:00			`# Copyright (c) 2018, Yannis Damigos`
			`# SPDX-License-Identifier: Apache-2.0`
yaml: Remove redundant document separators YAML document separators are needed e.g. when doing $ cat doc1.yaml doc2.yaml \| <parser> For the bindings, we never parse concatenated documents. Assume we don't for any other .yaml files either. Having document separators in e.g. base.yaml makes !include a bit confusing, since the !included files are merged and not separate documents (the merging is done in Python code though, so it makes no difference for behavior). The replacement was done with $ git ls-files '.yaml' \| \ xargs sed -i -e '${/\s\.\.\.\s/d;}' -e 's/^\s---\s$//' First pattern removes ... at the end of files, second pattern clears a line with a lone --- on it. Some redundant blank lines at the end of files were cleared with $ git ls-files '.yaml' \| xargs sed -i '${/^\s*$/d}' This is more about making sure people can understand why every part of a binding is there than about removing some text. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2019-06-19 00:03:49 +02:00
dts: bindings: Preserve newlines in descriptions With https://github.com/zephyrproject-rtos/zephyr/pull/20185, multi-line descriptions will be formatted nicely, but using '>' breaks it, because it removes internal newlines (including between paragraphs). See https://yaml-multiline.info/. Replace 'description: >' with 'description: \|' to encourage '\|'. That'll prevent '>' from getting copied around and messing up long descriptions. This will lead to some extra newlines in the output, but it's fine. Line-wrapping messes up any manual formatting. The replacement was done with $ git ls-files 'dts/bindings/.yaml' \| \ xargs sed -i 's/description:\s>/description: \|/' Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2019-10-28 17:34:12 +01:00			`description: \|`
dts: bindings: Add yaml files for PHY subsystem Add yaml file for initial support of USB PHYs. It adds also yaml files for STM32 USBPHYC and USB controllers with embedded PHY. PHY refers to the physical layer which is used to connect a device to the physical medium e.g. USB controller. Origin: original Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> 2018-10-03 14:58:29 +02:00			`This binding is to be used by all the usb transceivers which are built-in`
			`with USB IP`

scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2019-08-19 20:32:25 +02:00			`compatible: "usb-nop-xceiv"`

dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-08-22 01:10:12 +02:00			`include: phy-controller.yaml`
dts: bindings: Add yaml files for PHY subsystem Add yaml file for initial support of USB PHYs. It adds also yaml files for STM32 USBPHYC and USB controllers with embedded PHY. PHY refers to the physical layer which is used to connect a device to the physical medium e.g. USB controller. Origin: original Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> 2018-10-03 14:58:29 +02:00
			`properties:`
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> 2023-01-03 20:21:25 +01:00			`"#phy-cells":`
			`const: 0`