zephyr/boards/st/nucleo_f412zg/nucleo_f412zg.yaml

identifier: nucleo_f412zg
name: ST Nucleo F412ZG
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
ram: 256
flash: 1024
supported:
  - arduino_i2c
  - arduino_gpio
  - arduino_spi
  - pwm
  - i2c
  - spi
  - gpio
  - usb_device
  - counter
vendor: st
boards: add board meta-data Add board metadata to be consumed by the sanitycheck script to provide better matching with testcases and to test based on features declated in the board files. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2017-04-05 05:08:59 +02:00			`identifier: nucleo_f412zg`
boards: stm32: Fix boards names in yaml and/or doc files For auto doc generation purpose, get name value of boards' yaml files in sync with name provided as board name in .rst file Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2020-05-04 17:05:27 +02:00			`name: ST Nucleo F412ZG`
boards: add board meta-data Add board metadata to be consumed by the sanitycheck script to provide better matching with testcases and to test based on features declated in the board files. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2017-04-05 05:08:59 +02:00			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 17:11:23 +02:00			`- gnuarmemb`
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-09 17:25:16 +01:00			`- xtools`
boards: nucleo_f412zg: Fix default config According to GH7151: boards: Move existing boards to "default configuration guidelines" Add SPI1 Arduino compatible config Add I2C1 Arduino compatible config Add USART6 Arduino compatible config Disable Features by default. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2018-09-11 14:49:48 +02:00			`ram: 256`
			`flash: 1024`
boards: arm: stm32: Added pwm to supported list Update various stm32 board yaml files to add pwm as a supported feature of the board. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-05-25 20:34:31 +02:00			`supported:`
boards: Add arduino_i2c in yaml when supported Update boards yaml file with arduino_i2c supported option We exclude disco_l475_iot1 from the x_nucleo_iks01a1 sample since there are duplicated sensors between the disco_l475_iot1 and shield. Until Zephyr drivers can handle multiple sensors we need to have this exclude. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-16 10:11:53 +01:00			`- arduino_i2c`
boards: stm32: Set arduino gpio connector on nucleo 144 pins boards Apply same scheme for all nucleo 144 pins boards: -provide a separate arduino connector dtsi file -provide complete gpio map -update board.yaml vs arduino support (i2c, spi and gpio) Done using following references: http://www.st.com/resource/en/user_manual/dm00105823.pdf http://www.st.com/resource/en/user_manual/dm00368330.pdf Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2019-10-07 11:41:41 +02:00			`- arduino_gpio`
			`- arduino_spi`
boards: arm: stm32: Added pwm to supported list Update various stm32 board yaml files to add pwm as a supported feature of the board. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-05-25 20:34:31 +02:00			`- pwm`
boards: nucleo_f412zg: Fix default config According to GH7151: boards: Move existing boards to "default configuration guidelines" Add SPI1 Arduino compatible config Add I2C1 Arduino compatible config Add USART6 Arduino compatible config Disable Features by default. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2018-09-11 14:49:48 +02:00			`- i2c`
			`- spi`
			`- gpio`
			`- usb_device`
boards: Update yaml for boards supporting rtc/counter (1/3) Few boards supporting RTC were missing rtc as supported rtc feature in yaml files. Fix this. Add counter to all boards supporting rtc as RTC IP now support both rtc and counter API. Change split in 3 parts in order to lower CI load and get shippable happy. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2019-02-07 08:59:34 +01:00			`- counter`
boards: add vendor to board yaml This is coming from devicetree and corrosponds to what we have in the dts/bindings/vendor-prefixes.txt file. This will allow for static filtering, especially with twister, i.e. no need to build anything to know the vendor of a board All of the vendor data was extracted automatically from the devicetree, so some platforms might not have the right vendor or no vendor at all right now, we need to fix some of the DTS information or do this manually to get this 100% correct. But we are close. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-06-22 20:47:45 +02:00			`vendor: st`