zephyr/boards/st/stm32f429i_disc1/stm32f429i_disc1.yaml

identifier: stm32f429i_disc1
name: ST STM32F429I Discovery
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
ram: 192
flash: 2048
supported:
  - counter
  - i2c
  - spi
  - display
vendor: st
stm32f4: Add STM32F429I-DISC1 board Add necessary board files, pinmux and device tree in order to have a usable debug console. ZEP-2461 Signed-off-by: Jun Li <jun.r.li@intel.com> 2017-08-06 19:44:54 +02:00			`identifier: stm32f429i_disc1`
boards: stm32: Fix boards names in yaml and/or doc files For auto doc generation purpose, get name value of boards' yaml files in sync with name provided as board name in .rst file Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2020-05-04 17:05:27 +02:00			`name: ST STM32F429I Discovery`
stm32f4: Add STM32F429I-DISC1 board Add necessary board files, pinmux and device tree in order to have a usable debug console. ZEP-2461 Signed-off-by: Jun Li <jun.r.li@intel.com> 2017-08-06 19:44:54 +02:00			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
build: Replace GCC ARM Embedded with GNU Arm Embedded The old GCC ARM Embedded website on launchpad (https://launchpad.net/gcc-arm-embedded) has been superseeded by the new GNU Arm Embedded one (https://developer.arm.com/open-source/gnu-toolchain/gnu-rm). This also means a change of name from "GCC" to "GNU". Reflect this in the enviroment variables so that the proper term is used henceforth. Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> 2018-08-03 17:11:23 +02:00			`- gnuarmemb`
boards: arm: Add xtools as a supported toolchain Update all ARM boards to have xtools as a supported toolchain. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-01-09 17:25:16 +01:00			`- xtools`
boards: stm32: Enable CCM and update yaml Following fix SRAM size to take into account CCM, enable CCM and update yaml files in boards including fixed soc dtsi definitions. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2019-03-25 11:40:24 +01:00			`ram: 192`
			`flash: 2048`
boards/arm: Enable RTC on STM32F4 based boards Enable RTC on STM32F4 based boards. Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com> Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2018-06-20 18:51:42 +02:00			`supported:`
boards: Update yaml for boards supporting rtc/counter (2/3) Few boards supporting RTC were missing rtc as supported rtc feature in yaml files. Fix this. Add counter to all boards supporting rtc as RTC IP now support both rtc and counter API. Change split in 3 parts in order to lower CI load and get shippable happy. Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org> 2019-02-07 09:00:01 +01:00			`- counter`
boards: stm32f429_disc1: add i2c Add I2C_1, I2C_2, I2C_3 devices. I2C_3: Enabled by default (STMPE811 touch) Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com> 2019-07-28 12:21:24 +02:00			`- i2c`
boards: stm32f429i_disc1: add SPI5 support Add support of RCC configuration. Add pinmux items Signed-off-by: Pavlo Hamov <pavlo_hamov@jabil.com> 2019-09-17 16:57:15 +02:00			`- spi`
boards: arm: stm32f429i_disc1: enable LTDC interface Enable LTDC interface to drive the ILI9341 in RGB mode. Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com> 2022-04-05 21:04:54 +02:00			`- display`
boards: add vendor to board yaml This is coming from devicetree and corrosponds to what we have in the dts/bindings/vendor-prefixes.txt file. This will allow for static filtering, especially with twister, i.e. no need to build anything to know the vendor of a board All of the vendor data was extracted automatically from the devicetree, so some platforms might not have the right vendor or no vendor at all right now, we need to fix some of the DTS information or do this manually to get this 100% correct. But we are close. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-06-22 20:47:45 +02:00			`vendor: st`