zephyr/drivers/counter/Kconfig.native_posix

# Copyright (c) 2020, Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

config COUNTER_NATIVE_POSIX
	bool "Counter on COUNTER_0"
	default y
	depends on DT_HAS_ZEPHYR_NATIVE_POSIX_COUNTER_ENABLED

config COUNTER_NATIVE_POSIX_FREQUENCY
	int "native_posix counter frequency in Hz"
	default 1000
	depends on COUNTER_NATIVE_POSIX

config COUNTER_NATIVE_POSIX_NBR_CHANNELS
	int "native counter, number of channels"
	default 4
	depends on COUNTER_NATIVE_POSIX
drivers: counter: Add native_posix counter hardware model and driver Adds native_posix hw counter model and the counter driver. Functionality is needed by software which is tested on native_posix and has dependency on counter. Hardware model was developed similarly to HW timer model. The counter driver wraps HW counter functions and exposes basic functionalities: starting, stopping, setting and cancelling single channel alarms. Code was tested against: tests/drivers/counter/counter_basic_api. Signed-off-by: Filip Zajdel <filip.zajdel@nordicsemi.no> 2020-07-21 16:34:03 +02:00			`# Copyright (c) 2020, Nordic Semiconductor ASA`
			`# SPDX-License-Identifier: Apache-2.0`

			`config COUNTER_NATIVE_POSIX`
drivers: counter: native_posix: use tabs in Kconfig Kconfig used spaces instead of tabs, leading to compliance failures. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> 2022-03-09 13:11:42 +01:00			`bool "Counter on COUNTER_0"`
			`default y`
drivers: counter: Update drivers to use devicetree Kconfig symbol Update counter drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol to expose the driver and enable it by default based on devicetree. We remove 'depend on' Kconfig for symbols that would be implied by the devicetree node existing. Signed-off-by: Kumar Gala <galak@kernel.org> 2022-07-21 23:33:07 +02:00			`depends on DT_HAS_ZEPHYR_NATIVE_POSIX_COUNTER_ENABLED`
drivers: counter: Add native_posix counter hardware model and driver Adds native_posix hw counter model and the counter driver. Functionality is needed by software which is tested on native_posix and has dependency on counter. Hardware model was developed similarly to HW timer model. The counter driver wraps HW counter functions and exposes basic functionalities: starting, stopping, setting and cancelling single channel alarms. Code was tested against: tests/drivers/counter/counter_basic_api. Signed-off-by: Filip Zajdel <filip.zajdel@nordicsemi.no> 2020-07-21 16:34:03 +02:00
			`config COUNTER_NATIVE_POSIX_FREQUENCY`
drivers: counter: native_posix: use tabs in Kconfig Kconfig used spaces instead of tabs, leading to compliance failures. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> 2022-03-09 13:11:42 +01:00			`int "native_posix counter frequency in Hz"`
			`default 1000`
			`depends on COUNTER_NATIVE_POSIX`
drivers: counter native: Add top value conf and multi channel support The counter_native_posix driver currently does not support top value configuration, i.e. `ctr_set_top_value` returns `-ENOTSUP`. This commit adds support for top value configuration, and with the counter API now fully implemented, adds `counter` to `supported` peripherals for native_posix target. It also resolves an existing bug in which the counter ISR did not reset upon reaching `TOP_VALUE`. And adds support for multiple channels Signed-off-by: Jason Wright <jason@jpw.nyc> Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no> 2023-10-13 04:47:18 +02:00
			`config COUNTER_NATIVE_POSIX_NBR_CHANNELS`
			`int "native counter, number of channels"`
			`default 4`
			`depends on COUNTER_NATIVE_POSIX`