zephyr/drivers/timer/cc13xx_cc26xx_rtc_timer.c

256 lines
5.8 KiB
C
Raw Normal View History

/*
* Copyright (c) 2019, Texas Instruments Incorporated
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ti_cc13xx_cc26xx_rtc_timer
/*
* TI SimpleLink CC13X2/CC26X2 RTC-based system timer
*
* This system timer implementation supports both tickless and ticking modes.
* RTC counts continually in 64-bit mode and timeouts are
* scheduled using the RTC comparator. An interrupt is triggered whenever
* the comparator value set is reached.
*/
#include <zephyr/init.h>
#include <soc.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/timer/system_timer.h>
#include <zephyr/irq.h>
#include <zephyr/spinlock.h>
#include <zephyr/sys_clock.h>
#include <zephyr/sys/util.h>
#include <driverlib/interrupt.h>
#include <driverlib/aon_rtc.h>
#include <driverlib/aon_event.h>
#define RTC_COUNTS_PER_SEC 0x100000000ULL
/* Number of counts per rtc timer cycle */
#define RTC_COUNTS_PER_CYCLE (RTC_COUNTS_PER_SEC / \
sys_clock_hw_cycles_per_sec())
/* Number of counts per system clock tick */
#define RTC_COUNTS_PER_TICK (RTC_COUNTS_PER_SEC / \
CONFIG_SYS_CLOCK_TICKS_PER_SEC)
/* Number of RTC cycles per system clock tick */
#define CYCLES_PER_TICK (sys_clock_hw_cycles_per_sec() / \
CONFIG_SYS_CLOCK_TICKS_PER_SEC)
/*
* Maximum number of ticks.
*/
#define MAX_CYC 0x7FFFFFFFFFFFULL
#define MAX_TICKS (MAX_CYC / RTC_COUNTS_PER_TICK)
/*
* Due to the nature of clock synchronization, the comparator cannot be set
* to a value that is too close to the current time. This constant defines
* a safe threshold for the comparator.
*/
#define COMPARE_MARGIN 6
/* RTC count of the last announce call, rounded down to tick boundary. */
static volatile uint64_t rtc_last;
#ifdef CONFIG_TICKLESS_KERNEL
static struct k_spinlock lock;
#else
static uint64_t nextThreshold = RTC_COUNTS_PER_TICK;
#endif /* CONFIG_TICKLESS_KERNEL */
static void setThreshold(uint32_t next)
{
uint32_t now;
unsigned int key;
key = irq_lock();
/* get the current RTC count corresponding to compare window */
now = AONRTCCurrentCompareValueGet();
/* if next is too soon, set at least one RTC tick in future */
/* assume next never be more than half the maximum 32 bit count value */
if ((next - now) > (uint32_t)0x80000000) {
/* now is past next */
next = now + COMPARE_MARGIN;
} else if ((now + COMPARE_MARGIN - next) < (uint32_t)0x80000000) {
if (next < now + COMPARE_MARGIN) {
next = now + COMPARE_MARGIN;
}
}
/* set next compare threshold in RTC */
AONRTCCompareValueSet(AON_RTC_CH0, next);
irq_unlock(key);
}
isr: Normalize usage of device instance through ISR The goal of this patch is to replace the 'void *' parameter by 'struct device *' if they use such variable or just 'const void *' on all relevant ISRs This will avoid not-so-nice const qualifier tweaks when device instances will be constant. Note that only the ISR passed to IRQ_CONNECT are of interest here. In order to do so, the script fix_isr.py below is necessary: from pathlib import Path import subprocess import pickle import mmap import sys import re import os cocci_template = """ @r_fix_isr_0 @ type ret_type; identifier P; identifier D; @@ -ret_type <!fn!>(void *P) +ret_type <!fn!>(const struct device *P) { ... ( const struct device *D = (const struct device *)P; | const struct device *D = P; ) ... } @r_fix_isr_1 @ type ret_type; identifier P; identifier D; @@ -ret_type <!fn!>(void *P) +ret_type <!fn!>(const struct device *P) { ... const struct device *D; ... ( D = (const struct device *)P; | D = P; ) ... } @r_fix_isr_2 @ type ret_type; identifier A; @@ -ret_type <!fn!>(void *A) +ret_type <!fn!>(const void *A) { ... } @r_fix_isr_3 @ const struct device *D; @@ -<!fn!>((void *)D); +<!fn!>(D); @r_fix_isr_4 @ type ret_type; identifier D; identifier P; @@ -ret_type <!fn!>(const struct device *P) +ret_type <!fn!>(const struct device *D) { ... ( -const struct device *D = (const struct device *)P; | -const struct device *D = P; ) ... } @r_fix_isr_5 @ type ret_type; identifier D; identifier P; @@ -ret_type <!fn!>(const struct device *P) +ret_type <!fn!>(const struct device *D) { ... -const struct device *D; ... ( -D = (const struct device *)P; | -D = P; ) ... } """ def find_isr(fn): db = [] data = None start = 0 try: with open(fn, 'r+') as f: data = str(mmap.mmap(f.fileno(), 0).read()) except Exception as e: return db while True: isr = "" irq = data.find('IRQ_CONNECT', start) while irq > -1: p = 1 arg = 1 p_o = data.find('(', irq) if p_o < 0: irq = -1 break; pos = p_o + 1 while p > 0: if data[pos] == ')': p -= 1 elif data[pos] == '(': p += 1 elif data[pos] == ',' and p == 1: arg += 1 if arg == 3: isr += data[pos] pos += 1 isr = isr.strip(',\\n\\t ') if isr not in db and len(isr) > 0: db.append(isr) start = pos break if irq < 0: break return db def patch_isr(fn, isr_list): if len(isr_list) <= 0: return for isr in isr_list: tmplt = cocci_template.replace('<!fn!>', isr) with open('/tmp/isr_fix.cocci', 'w') as f: f.write(tmplt) cmd = ['spatch', '--sp-file', '/tmp/isr_fix.cocci', '--in-place', fn] subprocess.run(cmd) def process_files(path): if path.is_file() and path.suffix in ['.h', '.c']: p = str(path.parent) + '/' + path.name isr_list = find_isr(p) patch_isr(p, isr_list) elif path.is_dir(): for p in path.iterdir(): process_files(p) if len(sys.argv) < 2: print("You need to provide a dir/file path") sys.exit(1) process_files(Path(sys.argv[1])) And is run: ./fix_isr.py <zephyr root directory> Finally, some files needed manual fixes such. Fixes #27399 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2020-06-17 14:58:56 +02:00
void rtc_isr(const void *arg)
{
#ifndef CONFIG_TICKLESS_KERNEL
uint64_t newThreshold;
uint32_t next;
#else
uint64_t ticks, currCount;
#endif
ARG_UNUSED(arg);
AONRTCEventClear(AON_RTC_CH0);
#ifdef CONFIG_TICKLESS_KERNEL
k_spinlock_key_t key = k_spin_lock(&lock);
currCount = (uint64_t)AONRTCCurrent64BitValueGet();
ticks = (currCount - rtc_last) / RTC_COUNTS_PER_TICK;
rtc_last += ticks * RTC_COUNTS_PER_TICK;
k_spin_unlock(&lock, key);
sys_clock_announce(ticks);
#else /* !CONFIG_TICKLESS_KERNEL */
/* calculate new 64-bit RTC count for next interrupt */
newThreshold = nextThreshold + RTC_COUNTS_PER_TICK;
next = (uint32_t)((uint64_t)newThreshold >> 16);
setThreshold(next);
nextThreshold = newThreshold;
rtc_last += RTC_COUNTS_PER_TICK;
sys_clock_announce(1);
#endif /* CONFIG_TICKLESS_KERNEL */
}
static void initDevice(void)
{
AONRTCDisable();
AONRTCReset();
HWREG(AON_RTC_BASE + AON_RTC_O_SYNC) = 1;
/* read sync register to complete reset */
HWREG(AON_RTC_BASE + AON_RTC_O_SYNC);
AONRTCEventClear(AON_RTC_CH0);
IntPendClear(INT_AON_RTC_COMB);
HWREG(AON_RTC_BASE + AON_RTC_O_SYNC);
}
static void startDevice(void)
{
uint32_t compare;
uint64_t period;
unsigned int key;
key = irq_lock();
/* reset timer */
AONRTCReset();
AONRTCEventClear(AON_RTC_CH0);
IntPendClear(INT_AON_RTC_COMB);
/*
* set the compare register to one period.
* For a very small period round up to interrupt upon 4th tick in
* compare register
*/
period = RTC_COUNTS_PER_TICK;
if (period < 0x40000) {
compare = 0x4; /* 4 * 15.5us ~= 62us */
} else {
/* else, interrupt on first period expiration */
compare = period >> 16;
}
/* set the compare value at the RTC */
AONRTCCompareValueSet(AON_RTC_CH0, compare);
/* enable compare channel 0 */
AONEventMcuWakeUpSet(AON_EVENT_MCU_WU0, AON_EVENT_RTC0);
AONRTCChannelEnable(AON_RTC_CH0);
AONRTCCombinedEventConfig(AON_RTC_CH0);
/* start timer */
AONRTCEnable();
irq_unlock(key);
}
void sys_clock_set_timeout(int32_t ticks, bool idle)
{
ARG_UNUSED(idle);
#ifdef CONFIG_TICKLESS_KERNEL
kernel/timeout: Make timeout arguments an opaque type Add a k_timeout_t type, and use it everywhere that kernel API functions were accepting a millisecond timeout argument. Instead of forcing milliseconds everywhere (which are often not integrally representable as system ticks), do the conversion to ticks at the point where the timeout is created. This avoids an extra unit conversion in some application code, and allows us to express the timeout in units other than milliseconds to achieve greater precision. The existing K_MSEC() et. al. macros now return initializers for a k_timeout_t. The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t values, which means they cannot be operated on as integers. Applications which have their own APIs that need to inspect these vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to test for equality. Timer drivers, which receive an integer tick count in ther z_clock_set_timeout() functions, now use the integer-valued K_TICKS_FOREVER constant instead of K_FOREVER. For the initial release, to preserve source compatibility, a CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the k_timeout_t will remain a compatible 32 bit value that will work with any legacy Zephyr application. Some subsystems present timeout (or timeout-like) values to their own users as APIs that would re-use the kernel's own constants and conventions. These will require some minor design work to adapt to the new scheme (in most cases just using k_timeout_t directly in their own API), and they have not been changed in this patch, instead selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems include: CAN Bus, the Microbit display driver, I2S, LoRa modem drivers, the UART Async API, Video hardware drivers, the console subsystem, and the network buffer abstraction. k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant provided that works identically to the original API. Most of the changes here are just type/configuration management and documentation, but there are logic changes in mempool, where a loop that used a timeout numerically has been reworked using a new z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was enabled) a similar loop was needlessly used to try to retry the k_poll() call after a spurious failure. But k_poll() does not fail spuriously, so the loop was removed. Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
2020-03-06 00:18:14 +01:00
ticks = (ticks == K_TICKS_FOREVER) ? MAX_TICKS : ticks;
ticks = CLAMP(ticks - 1, 0, (int32_t) MAX_TICKS);
k_spinlock_key_t key = k_spin_lock(&lock);
/* Compute number of RTC cycles until the next timeout. */
uint64_t count = AONRTCCurrent64BitValueGet();
uint64_t timeout = ticks * RTC_COUNTS_PER_TICK +
(count - rtc_last);
/* Round to the nearest tick boundary. */
timeout = DIV_ROUND_UP(timeout, RTC_COUNTS_PER_TICK) *
RTC_COUNTS_PER_TICK;
timeout = MIN(timeout, MAX_CYC);
timeout += rtc_last;
/* Set the comparator */
setThreshold(timeout >> 16);
k_spin_unlock(&lock, key);
#endif /* CONFIG_TICKLESS_KERNEL */
}
uint32_t sys_clock_elapsed(void)
{
uint32_t ret = (AONRTCCurrent64BitValueGet() - rtc_last) /
RTC_COUNTS_PER_TICK;
return ret;
}
uint32_t sys_clock_cycle_get_32(void)
{
return (uint32_t)(AONRTCCurrent64BitValueGet() / RTC_COUNTS_PER_CYCLE);
}
uint64_t sys_clock_cycle_get_64(void)
{
return AONRTCCurrent64BitValueGet() / RTC_COUNTS_PER_CYCLE;
}
init: remove the need for a dummy device pointer in SYS_INIT functions The init infrastructure, found in `init.h`, is currently used by: - `SYS_INIT`: to call functions before `main` - `DEVICE_*`: to initialize devices They are all sorted according to an initialization level + a priority. `SYS_INIT` calls are really orthogonal to devices, however, the required function signature requires a `const struct device *dev` as a first argument. The only reason for that is because the same init machinery is used by devices, so we have something like: ```c struct init_entry { int (*init)(const struct device *dev); /* only set by DEVICE_*, otherwise NULL */ const struct device *dev; } ``` As a result, we end up with such weird/ugly pattern: ```c static int my_init(const struct device *dev) { /* always NULL! add ARG_UNUSED to avoid compiler warning */ ARG_UNUSED(dev); ... } ``` This is really a result of poor internals isolation. This patch proposes a to make init entries more flexible so that they can accept sytem initialization calls like this: ```c static int my_init(void) { ... } ``` This is achieved using a union: ```c union init_function { /* for SYS_INIT, used when init_entry.dev == NULL */ int (*sys)(void); /* for DEVICE*, used when init_entry.dev != NULL */ int (*dev)(const struct device *dev); }; struct init_entry { /* stores init function (either for SYS_INIT or DEVICE*) union init_function init_fn; /* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows * to know which union entry to call. */ const struct device *dev; } ``` This solution **does not increase ROM usage**, and allows to offer clean public APIs for both SYS_INIT and DEVICE*. Note that however, init machinery keeps a coupling with devices. **NOTE**: This is a breaking change! All `SYS_INIT` functions will need to be converted to the new signature. See the script offered in the following commit. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> init: convert SYS_INIT functions to the new signature Conversion scripted using scripts/utils/migrate_sys_init.py. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> manifest: update projects for SYS_INIT changes Update modules with updated SYS_INIT calls: - hal_ti - lvgl - sof - TraceRecorderSource Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> tests: devicetree: devices: adjust test Adjust test according to the recently introduced SYS_INIT infrastructure. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no> tests: kernel: threads: adjust SYS_INIT call Adjust to the new signature: int (*init_fn)(void); Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-10-19 09:33:44 +02:00
static int sys_clock_driver_init(void)
{
rtc_last = 0U;
initDevice();
startDevice();
/* Enable RTC interrupt. */
IRQ_CONNECT(DT_INST_IRQN(0),
DT_INST_IRQ(0, priority),
rtc_isr, 0, 0);
irq_enable(DT_INST_IRQN(0));
return 0;
}
SYS_INIT(sys_clock_driver_init, PRE_KERNEL_2,
CONFIG_SYSTEM_CLOCK_INIT_PRIORITY);