zephyr/dts/bindings/sensor/st,vl53l0x.yaml

# Copyright (c) 2017, Linaro Limited
# SPDX-License-Identifier: Apache-2.0

description: STMicroelectronics VL53L0X Time of Flight sensor

compatible: "st,vl53l0x"

include: [sensor-device.yaml, i2c-device.yaml]

properties:
  xshut-gpios:
    type: phandle-array
    description: |
      Xshutdown pin, Active LOW.
boards: disco_l475_iot1: Enable vl53l0x sensor Add all files related to the board and sensor. Signed-off-by: Vincent Veron <vincent.veron@st.com> 2017-07-19 17:07:17 +02:00			`# Copyright (c) 2017, Linaro Limited`
			`# SPDX-License-Identifier: Apache-2.0`
yaml: Remove redundant document separators YAML document separators are needed e.g. when doing $ cat doc1.yaml doc2.yaml \| <parser> For the bindings, we never parse concatenated documents. Assume we don't for any other .yaml files either. Having document separators in e.g. base.yaml makes !include a bit confusing, since the !included files are merged and not separate documents (the merging is done in Python code though, so it makes no difference for behavior). The replacement was done with $ git ls-files '.yaml' \| \ xargs sed -i -e '${/\s\.\.\.\s/d;}' -e 's/^\s---\s$//' First pattern removes ... at the end of files, second pattern clears a line with a lone --- on it. Some redundant blank lines at the end of files were cleared with $ git ls-files '.yaml' \| xargs sed -i '${/^\s*$/d}' This is more about making sure people can understand why every part of a binding is there than about removing some text. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2019-06-19 00:03:49 +02:00
dts: bindings: Remove 'title:' and put all info. into 'description:' Add any useful information from 'title:' to the 'description:' strings (e.g. explanations of acronyms), and remove 'title:' as well as any copy-pasted "this binding gives a ..." boilerplate. Also clean some description strings up a bit. Some other things could probably be cleaned up (replacing 'GPIO node' with 'GPIO controller' on controllers for consistency, for example), but I kept things close to the original to avoid accidentally messing up. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2019-11-19 08:39:11 +01:00			`description: STMicroelectronics VL53L0X Time of Flight sensor`
boards: disco_l475_iot1: Enable vl53l0x sensor Add all files related to the board and sensor. Signed-off-by: Vincent Veron <vincent.veron@st.com> 2017-07-19 17:07:17 +02:00
scripts: dts: Simplify and improve 'compatible' matching Instead of properties: compatible: constraint: "foo" , just have compatible: "foo" at the top level of the binding. For backwards compatibility, the old 'properties: compatible: ...' form is still accepted for now, and is treated the same as a single-element 'compatible:'. The old syntax was inspired by dt-schema (though it isn't dt-schema-compatible), which is in turn a thin wrapper around json-schema (the idea is to transform .dts files into YAML and then verify them). Maybe the idea was to gradually switch the syntax over to dt-schema and then be able to use unmodified dt-schema bindings, but dt-schema is really a different kind of tool (a completely standalone linter), and works very differently from our stuff (see schemas/dt-core.yaml in the dt-schema repo to get an idea of just how differently). Better to keep it simple. This commit also piggybacks some clarifications to the binding template re. '#cells:'. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> 2019-08-19 20:32:25 +02:00			`compatible: "st,vl53l0x"`
boards: disco_l475_iot1: Enable vl53l0x sensor Add all files related to the board and sensor. Signed-off-by: Vincent Veron <vincent.veron@st.com> 2017-07-19 17:07:17 +02:00
dts: bindings: Migrate ST sensors to inherit base sensor properties Migrates all ST sensors to inherit base sensor device properties. This will allow us to define properties shared by multiple sensors in one place. Signed-off-by: Maureen Helm <maureen.helm@intel.com> 2022-08-16 22:59:04 +02:00			`include: [sensor-device.yaml, i2c-device.yaml]`
sensor: vl53l0x: Convert GPIO XSHUT to device tree Update vl53l0x dts binding to include GPIO XSHUT pin and change driver code to get the GPIO pin and controller info from DT instead of Kconfig. Signed-off-by: Kumar Gala <kumar.gala@linaro.org> 2019-11-05 14:32:55 +01:00
			`properties:`
yamllint: indentation: fix dts/bindings/ Fix the YAML files indentation for files in dts/bindings/. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> 2023-01-03 20:21:25 +01:00			`xshut-gpios:`
			`type: phandle-array`
drivers: sensor: vl53l0x: fix XSHUT pin as active low Also utilises gpio_pin_configure_dt() API to configure and set pin state at the same time. Signed-off-by: Nick Ward <nix.ward@gmail.com> 2023-05-25 08:10:18 +02:00			`description: \|`
			`Xshutdown pin, Active LOW.`