zephyr/drivers/lora/CMakeLists.txt

# SPDX-License-Identifier: Apache-2.0

# LoRa drivers depend on the include directories exposed by the loramac-node
# library. Hence, if it exists then the source files are added to that otherwise
# a library with same name is created.
if(TARGET loramac-node)
	set(ZEPHYR_CURRENT_LIBRARY loramac-node)
else()
	zephyr_library_named(loramac-node)
endif()

zephyr_library_sources_ifdef(CONFIG_LORA_SHELL shell.c)
zephyr_library_sources_ifdef(CONFIG_HAS_SEMTECH_RADIO_DRIVERS hal_common.c)
zephyr_library_sources_ifdef(CONFIG_HAS_SEMTECH_RADIO_DRIVERS sx12xx_common.c)
zephyr_library_sources_ifdef(CONFIG_LORA_SX127X sx127x.c)

if (CONFIG_LORA_SX126X OR CONFIG_LORA_STM32WL_SUBGHZ_RADIO)
	zephyr_library_sources(sx126x.c)
endif()

zephyr_library_sources_ifdef(CONFIG_LORA_SX126X sx126x_standalone.c)
zephyr_library_sources_ifdef(CONFIG_LORA_STM32WL_SUBGHZ_RADIO sx126x_stm32wl.c)
drivers: lora: Add SX1276 LoRa Modem support Add support for Semtech SX1276 LoRa Modem. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> 2019-07-20 22:18:03 +02:00			`# SPDX-License-Identifier: Apache-2.0`

drivers: lora: Only create loramac-node library if not done before The loramac-node library definition will also be created by 'subsys/lorawan' for the LoRaWAN support. Hence, just add the source files if the previous declaration of the library is found else create a new one. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> 2020-07-05 17:54:31 +02:00			`# LoRa drivers depend on the include directories exposed by the loramac-node`
			`# library. Hence, if it exists then the source files are added to that otherwise`
			`# a library with same name is created.`
			`if(TARGET loramac-node)`
			`set(ZEPHYR_CURRENT_LIBRARY loramac-node)`
			`else()`
			`zephyr_library_named(loramac-node)`
			`endif()`
drivers: lora: Add SX1276 LoRa Modem support Add support for Semtech SX1276 LoRa Modem. Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> 2019-07-20 22:18:03 +02:00
drivers: lora: Add a shell for LoRa testing Provide basic commands that are useful when testing a LoRa radio. Currently, the shell supports: > lora conf ... > lora send ... > lora recv ... > lora test_cw ... Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se> 2020-04-16 01:35:04 +02:00			`zephyr_library_sources_ifdef(CONFIG_LORA_SHELL shell.c)`
drivers: lora: Move board support to a separate file The implementation of the board support routines is shared between all LoRa drivers that use LoRaMAC-Node. Move them from the SX1276 implementation to a separate source file to facilitate reuse. Make this source file conditional on CONFIG_HAS_SEMTECH_RADIO_DRIVERS since it will be used by all LoRaMAC-Node-based drivers. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se> 2020-05-04 19:23:59 +02:00			`zephyr_library_sources_ifdef(CONFIG_HAS_SEMTECH_RADIO_DRIVERS hal_common.c)`
drivers: lora: Factor out sx12xx common functionality LoRa radios supported by LoRaMAC-Node have a lot of common functionality. Zephyr's LoRa implementation for the SX1276 uses LoRaMAC-Nodes Radio HAL to implement API functionality like send and recv. The exact same functionality will be used by the SX126x driver. Facilitate sharing by moving that to a separate source file. Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se> 2020-05-05 10:16:32 +02:00			`zephyr_library_sources_ifdef(CONFIG_HAS_SEMTECH_RADIO_DRIVERS sx12xx_common.c)`
drivers: lora: sx127x: rework SX1276 driver to add SX1272 support SX1272 chip is very similar to the already supported SX1276; unfortunately, Semtech provides a completely separate driver for this one. This commit marks an attempt to avoid code duplication by means of some not-very-pretty ifdefery. Signed-off-by: Ilya Tagunov <tagunil@gmail.com> 2021-01-25 03:04:22 +01:00			`zephyr_library_sources_ifdef(CONFIG_LORA_SX127X sx127x.c)`
drivers: sx126x: add support for the stm32wl chip Add support for the STM32WL integrated radio, based on the sx1262. The STM32WL implementation does not use any GPIO, and the signals are routed to other units of the SoC and accessed with the ST HAL. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> 2021-07-03 20:06:31 +02:00
			`if (CONFIG_LORA_SX126X OR CONFIG_LORA_STM32WL_SUBGHZ_RADIO)`
			`zephyr_library_sources(sx126x.c)`
			`endif()`

drivers: sx126x: refactor few functions for stm32wl support Move few functions around in preparation of adding the STM32WL variant of the driver. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> 2021-07-03 20:06:31 +02:00			`zephyr_library_sources_ifdef(CONFIG_LORA_SX126X sx126x_standalone.c)`
drivers: sx126x: add support for the stm32wl chip Add support for the STM32WL integrated radio, based on the sx1262. The STM32WL implementation does not use any GPIO, and the signals are routed to other units of the SoC and accessed with the ST HAL. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> 2021-07-03 20:06:31 +02:00			`zephyr_library_sources_ifdef(CONFIG_LORA_STM32WL_SUBGHZ_RADIO sx126x_stm32wl.c)`