zephyr/kernel/idle.c

150 lines
3.6 KiB
C
Raw Normal View History

/*
* Copyright (c) 2016 Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <kernel.h>
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
#include <kernel_structs.h>
#include <toolchain.h>
#include <sections.h>
#include <drivers/system_timer.h>
#include <wait_q.h>
#include <power.h>
#if defined(CONFIG_TICKLESS_IDLE)
/*
* Idle time must be this value or higher for timer to go into tickless idle
* state.
*/
int32_t _sys_idle_threshold_ticks = CONFIG_TICKLESS_IDLE_THRESH;
#endif /* CONFIG_TICKLESS_IDLE */
#ifdef CONFIG_SYS_POWER_MANAGEMENT
/*
* Used to allow _sys_soc_suspend() implementation to control notification
* of the event that caused exit from kernel idling after pm operations.
*/
unsigned char _sys_pm_idle_exit_notify;
void __attribute__((weak)) _sys_soc_resume(void)
{
}
void __attribute__((weak)) _sys_soc_resume_from_deep_sleep(void)
{
}
/**
*
* @brief Indicate that kernel is idling in tickless mode
*
* Sets the kernel data structure idle field to either a positive value or
* K_FOREVER.
*
* @param ticks the number of ticks to idle
*
* @return N/A
*/
static void set_kernel_idle_time_in_ticks(int32_t ticks)
{
kernel/arch: consolidate tTCS and TNANO definitions There was a lot of duplication between architectures for the definition of threads and the "nanokernel" guts. These have been consolidated. Now, a common file kernel/unified/include/kernel_structs.h holds the common definitions. Architectures provide two files to complement it: kernel_arch_data.h and kernel_arch_func.h. The first one contains at least the struct _thread_arch and struct _kernel_arch data structures, as well as the struct _callee_saved and struct _caller_saved register layouts. The second file contains anything that needs what is provided by the common stuff in kernel_structs.h. Those two files are only meant to be included in kernel_structs.h in very specific locations. The thread data structure has been separated into three major parts: common struct _thread_base and struct k_thread, and arch-specific struct _thread_arch. The first and third ones are included in the second. The struct s_NANO data structure has been split into two: common struct _kernel and arch-specific struct _kernel_arch. The latter is included in the former. Offsets files have also changed: nano_offsets.h has been renamed kernel_offsets.h and is still included by the arch-specific offsets.c. Also, since the thread and kernel data structures are now made of sub-structures, offsets have to be added to make up the full offset. Some of these additions have been consolidated in shorter symbols, available from kernel/unified/include/offsets_short.h, which includes an arch-specific offsets_arch_short.h. Most of the code include offsets_short.h now instead of offsets.h. Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
2016-11-08 16:36:50 +01:00
_kernel.idle = ticks;
}
#else
#define set_kernel_idle_time_in_ticks(x) do { } while (0)
#endif
static void _sys_power_save_idle(int32_t ticks __unused)
{
#if defined(CONFIG_TICKLESS_IDLE)
if ((ticks == K_FOREVER) || ticks >= _sys_idle_threshold_ticks) {
/*
* Stop generating system timer interrupts until it's time for
* the next scheduled kernel timer to expire.
*/
_timer_idle_enter(ticks);
}
#endif /* CONFIG_TICKLESS_IDLE */
set_kernel_idle_time_in_ticks(ticks);
#if (defined(CONFIG_SYS_POWER_LOW_POWER_STATE) || \
defined(CONFIG_SYS_POWER_DEEP_SLEEP))
_sys_pm_idle_exit_notify = 1;
/*
* Call the suspend hook function of the soc interface to allow
* entry into a low power state. The function returns
* SYS_PM_NOT_HANDLED if low power state was not entered, in which
* case, kernel does normal idle processing.
*
* This function is entered with interrupts disabled. If a low power
* state was entered, then the hook function should enable inerrupts
* before exiting. This is because the kernel does not do its own idle
* processing in those cases i.e. skips k_cpu_idle(). The kernel's
* idle processing re-enables interrupts which is essential for
* the kernel's scheduling logic.
*/
if (_sys_soc_suspend(ticks) == SYS_PM_NOT_HANDLED) {
_sys_pm_idle_exit_notify = 0;
k_cpu_idle();
}
#else
k_cpu_idle();
#endif
}
void _sys_power_save_idle_exit(int32_t ticks)
{
#if defined(CONFIG_SYS_POWER_LOW_POWER_STATE)
/* Some CPU low power states require notification at the ISR
* to allow any operations that needs to be done before kernel
* switches task or processes nested interrupts. This can be
* disabled by calling _sys_soc_pm_idle_exit_notification_disable().
* Alternatively it can be simply ignored if not required.
*/
if (_sys_pm_idle_exit_notify) {
_sys_soc_resume();
}
#endif
#ifdef CONFIG_TICKLESS_IDLE
if ((ticks == K_FOREVER) || ticks >= _sys_idle_threshold_ticks) {
/* Resume normal periodic system timer interrupts */
_timer_idle_exit();
}
#else
ARG_UNUSED(ticks);
#endif /* CONFIG_TICKLESS_IDLE */
}
#if K_IDLE_PRIO < 0
#define IDLE_YIELD_IF_COOP() k_yield()
#else
#define IDLE_YIELD_IF_COOP() do { } while ((0))
#endif
void idle(void *unused1, void *unused2, void *unused3)
{
ARG_UNUSED(unused1);
ARG_UNUSED(unused2);
ARG_UNUSED(unused3);
#ifdef CONFIG_BOOT_TIME_MEASUREMENT
/* record timestamp when idling begins */
extern uint64_t __idle_tsc;
__idle_tsc = _tsc_read();
#endif
for (;;) {
(void)irq_lock();
_sys_power_save_idle(_get_next_timeout_expiry());
IDLE_YIELD_IF_COOP();
}
}