zephyr/boards/st/nucleo_g0b1re/nucleo_g0b1re.yaml

identifier: nucleo_g0b1re
name: ST Nucleo G0B1RE
type: mcu
arch: arm
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
ram: 144
flash: 512
supported:
  - adc
  - arduino_gpio
  - arduino_i2c
  - arduino_spi
  - arduino_serial
  - can
  - uart
  - gpio
  - i2c
  - spi
  - nvs
  - dma
  - usb_device
  - lptim
vendor: st
board: arm: add support for the nucleo_g0b1re board Support for the nucleo_g0b1re. Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com> 2020-12-30 22:52:04 +01:00			`identifier: nucleo_g0b1re`
			`name: ST Nucleo G0B1RE`
			`type: mcu`
			`arch: arm`
			`toolchain:`
			`- zephyr`
			`- gnuarmemb`
			`- xtools`
			`ram: 144`
			`flash: 512`
			`supported:`
boards: arm: Add vref node and alias for STM32 SoCs Add enabled vref node for all boards of supported STM32 SoC series which have the required adc node enabled. Add volt-sensor alias pointing to said vref node. Signed-off-by: Kenneth J. Miller <ken@miller.ec> 2023-05-14 23:54:05 +02:00			`- adc`
board: arm: add support for the nucleo_g0b1re board Support for the nucleo_g0b1re. Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com> 2020-12-30 22:52:04 +01:00			`- arduino_gpio`
			`- arduino_i2c`
			`- arduino_spi`
boards: nucleo_g0b1re: add arduino_serial as supported To make some tests requiring the dependency happy. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-09-19 14:23:10 +02:00			`- arduino_serial`
boards: arm: nucleo_g0b1re: add fdcan2 support The nucleo_g0b1re board is based on stm32g0 that supports 2 can controllers. This commit adds support for the second can controller. Add also can label in yml board file. Signed-off-by: Adrien MARTIN <adrienmar@kickmaker.net> 2024-01-25 12:16:33 +01:00			`- can`
board: arm: add support for the nucleo_g0b1re board Support for the nucleo_g0b1re. Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com> 2020-12-30 22:52:04 +01:00			`- uart`
			`- gpio`
			`- i2c`
			`- spi`
			`- nvs`
tests: driver: dma: enable tests on stm32g0 boards Enables dma test cases loop_transfer and chan_blen_transfer on stm32g03116_disco, nucleo_g071rb and nucleo_g0b1re. Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com> 2021-03-17 22:14:23 +01:00			`- dma`
boards: arm: nucleo_g0b1re: Enable support for USB Enable USB support for nucleo_g0b1re board. Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com> 2021-07-31 06:39:11 +02:00			`- usb_device`
boards: nucleo_g0b1re: Enable PM support Enable PM support for nucleo_g0b1re. Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com> 2021-07-31 06:08:12 +02:00			`- lptim`
boards: add vendor to board yaml This is coming from devicetree and corrosponds to what we have in the dts/bindings/vendor-prefixes.txt file. This will allow for static filtering, especially with twister, i.e. no need to build anything to know the vendor of a board All of the vendor data was extracted automatically from the devicetree, so some platforms might not have the right vendor or no vendor at all right now, we need to fix some of the DTS information or do this manually to get this 100% correct. But we are close. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-06-22 20:47:45 +02:00			`vendor: st`