patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity
zephyr/boards/nxp/mimxrt1064_evk/board.cmake

14 lines
413 B
CMake
Raw Normal View History

boards: arm: Add board support for mimxrt1064_evk Add board support files for mimxrt1064_evk, the development board for i.MXRT1064 (CM7) SoC. - Add pinmux, dts, doc. - Code can be loaded to SRAM. - Tested samples: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
2018-10-09 04:14:40 +02:00
#
west: linkserver: adding support to NXP boards Support for the following platforms is provided with this commit: - mimxrt595 - mimxrt1060 - mimxrt1064 - lpc55s69. Support for more boards will be added with future PR's Notes: - the debug firmware of the board must be CMSIS-DAP/LPC-Link (latest revision). If your board is running the jlink firmware, linkserver fails to connect to the board - probes can be listed by running: $ LinkServer probes Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
2023-05-17 23:02:05 +02:00
# Copyright 2018, 2023 NXP
boards: arm: Add board support for mimxrt1064_evk Add board support files for mimxrt1064_evk, the development board for i.MXRT1064 (CM7) SoC. - Add pinmux, dts, doc. - Code can be loaded to SRAM. - Tested samples: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
2018-10-09 04:14:40 +02:00
#
# SPDX-License-Identifier: Apache-2.0
#
debugger: rt1xxx series pyocd supporting update in pyocd-0.28 release pyocd can support below NXP rt1xxx mimxrt1010 mimxrt1015 mimxrt1060 mimxrt1064 user can upgrade latest pyocd with pip3 install pyocd -U Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
2020-09-28 10:41:21 +02:00
board_runner_args(pyocd "--target=mimxrt1064")
boards: mimxrt1064_evk: Default to internal flash and external sdram JLink V6.44 (2019-03-01) added support for the imx rt1064 soc, including programming the internal flash on flexspi2. Updates the mimxrt1064_evk board to use the internal flash and external sdram memories by default, now that the debug tools support them. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-03-04 18:36:26 +01:00
board_runner_args(jlink "--device=MIMXRT1064")
west: linkserver: adding support to NXP boards Support for the following platforms is provided with this commit: - mimxrt595 - mimxrt1060 - mimxrt1064 - lpc55s69. Support for more boards will be added with future PR's Notes: - the debug firmware of the board must be CMSIS-DAP/LPC-Link (latest revision). If your board is running the jlink firmware, linkserver fails to connect to the board - probes can be listed by running: $ LinkServer probes Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
2023-05-17 23:02:05 +02:00
board_runner_args(linkserver "--device=MIMXRT1064xxxxA:EVK-MIMXRT1064")
mimxrt1060_evk: mimxrt1064_evk: Enable pyocd runner Enables the pyocd runner on mimxrt1060_evk and mimxrt1064_evk boards using the generic cortex_m target. Note that this target is not capable of programming flash, therefore can only load an application to internal SRAM (set CONFIG_CODE_ITCM=y and CONFIG_DATA_DTCM=y) or attach to an application already programmed to flash by other means (e.g., DAPLink drag-and-drop). Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2019-04-09 20:13:51 +02:00
boards: arm: Add board support for mimxrt1064_evk Add board support files for mimxrt1064_evk, the development board for i.MXRT1064 (CM7) SoC. - Add pinmux, dts, doc. - Code can be loaded to SRAM. - Tested samples: hello_world, philosophers, synchronization, basic/blinky, and basic/button. Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
2018-10-09 04:14:40 +02:00
include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)
boards: arm: Remove OPENSDA_FW cmake variables from nxp boards The OPENSDA_FW and LPCLINK_FW cmake variables are remnants of pre-west days where we used an environment variable to set the desired debug host tool, such as jlink or pyocd, based on which debug probe firmware was loaded on the board. We now have two possible ways to do this, neither of which requires the nxp-specific OPENSDA_FW or LPCLINK_FW variables: 1. Set standardized cmake runner variables when generating the build system: $ west build -- -DBOARD_FLASH_RUNNER=jlink -DBOARD_DEBUG_RUNNER=jlink 2. Use the west "--runner" argument with the debug and flash commands: $ west debug -r jlink Remove the now unnecessary OPENSDA_FW ond LPCLINK_FW variables and update board documentation accordingly. A few boards (frdm_kw41z, hexiwear_k64, mimxrt10{20,50,60,64}_evk) reordered pyocd.board.cmake and jlink.board.cmake includes to preserve the default runner when OPENSDA_FW was not explicitly set. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2020-07-07 17:03:42 +02:00
include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
west: linkserver: adding support to NXP boards Support for the following platforms is provided with this commit: - mimxrt595 - mimxrt1060 - mimxrt1064 - lpc55s69. Support for more boards will be added with future PR's Notes: - the debug firmware of the board must be CMSIS-DAP/LPC-Link (latest revision). If your board is running the jlink firmware, linkserver fails to connect to the board - probes can be listed by running: $ LinkServer probes Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
2023-05-17 23:02:05 +02:00
include(${ZEPHYR_BASE}/boards/common/linkserver.board.cmake)
Reference in a new issue Copy permalink