patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

boards: arm: thingy53: Enable USB-CDC for console

Browse source 
This enables the USB-CDC port for console output by default when
configuring for the thingy53_nrf5340_cpuapp board. This is needed
as the UART on this board is not connected.

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This commit is contained in:
Jamie McCrae 2022-11-16 13:45:05 +00:00 committed by Carles Cufí
parent 885695f425
commit 0f7114fd6a
3 changed files with 62 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
boards/arm/thingy53_nrf5340/Kconfig
View file

@ -29,6 +29,10 @@ config BOARD_ENABLE_DCDC_HV
select SOC_DCDC_NRF53X_HV
default y
config BOARD_SERIAL_BACKEND_CDC_ACM
bool "USB CDC"
default y
config BOARD_ENABLE_CPUNET
bool "NRF53 Network MCU"
select SOC_NRF_GPIO_FORWARDER_FOR_NRF5340 if \

47
boards/arm/thingy53_nrf5340/Kconfig.defconfig
View file

@ -82,6 +82,53 @@ config REGULATOR
endif # !TRUSTED_EXECUTION_SECURE
if BOARD_SERIAL_BACKEND_CDC_ACM
config USB_DEVICE_PRODUCT
default "Thingy:53 Application"
config USB_DEVICE_VID
default 0x1915
config USB_DEVICE_PID
default 0x530C
config USB_DEVICE_STACK
default y
config USB_CDC_ACM
default y
config UART_CONSOLE
default CONSOLE
config USB_DEVICE_INITIALIZE_AT_BOOT
default y if !MCUBOOT
config SHELL_BACKEND_SERIAL_CHECK_DTR
default SHELL
config USB_DEVICE_REMOTE_WAKEUP
default n
if LOG
# Logger cannot use itself to log
config USB_CDC_ACM_LOG_LEVEL
default 0
# Set USB log level to error only
config USB_DEVICE_LOG_LEVEL
default 1
# Wait 4000ms at startup for logging
config LOG_PROCESS_THREAD_STARTUP_DELAY_MS
default 4000
endif # LOG
endif # BOARD_SERIAL_BACKEND_CDC_ACM
endif # BOARD_THINGY53_NRF5340_CPUAPP || BOARD_THINGY53_NRF5340_CPUAPP_NS
if BOARD_THINGY53_NRF5340_CPUNET

17
boards/arm/thingy53_nrf5340/thingy53_nrf5340_common.dts
View file

@ -7,11 +7,11 @@
/ {
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,bt-mon-uart = &uart0;
zephyr,bt-c2h-uart = &uart0;
zephyr,console = &cdc_acm_uart;
zephyr,shell-uart = &cdc_acm_uart;
zephyr,uart-mcumgr = &cdc_acm_uart;
zephyr,bt-mon-uart = &cdc_acm_uart;
zephyr,bt-c2h-uart = &cdc_acm_uart;
zephyr,bt-hci-rpmsg-ipc = &ipc0;
nordic,802154-spinel-ipc = &ipc0;
zephyr,ieee802154 = &ieee802154;
@ -212,8 +212,9 @@
/* UART0 GPIOs can be configured for other use-cases */
&uart0 {
/* Disabled by default */
current-speed = <115200>;
status = "okay";
status = "disabled";
pinctrl-0 = <&uart0_default>;
pinctrl-1 = <&uart0_sleep>;
pinctrl-names = "default", "sleep";
@ -300,6 +301,10 @@
zephyr_udc0: &usbd {
compatible = "nordic,nrf-usbd";
status = "okay";
cdc_acm_uart: cdc_acm_uart {
compatible = "zephyr,cdc-acm-uart";
};
};
/ {