soc: stm32l476rg: rename SOC config flag

Rename SOC_STM32L476XX to SOC_STM32L476XG to keep flash
size information.
Aim is to be able to distinguish flash size variants of
the SoC when needed (for instance in dts/arm/st/mem.h file)

Change-Id: I834bb5b83c24c39e90c0492a2b22a7c7802de361
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit is contained in:
Erwan Gouriou 2017-05-10 13:48:45 +02:00 committed by Anas Nashif
parent 558d50242d
commit 19a91c0272
7 changed files with 9 additions and 10 deletions

View file

@ -6,7 +6,7 @@
# SPDX-License-Identifier: Apache-2.0
#
if SOC_STM32L476XX
if SOC_STM32L476XG
config SOC
string
@ -16,5 +16,4 @@ config NUM_IRQS
int
default 82
endif # SOC_STM32L476XX
endif # SOC_STM32L476XG

View file

@ -10,8 +10,8 @@ choice
prompt "STM32L4x MCU Selection"
depends on SOC_SERIES_STM32L4X
config SOC_STM32L476XX
bool "STM32L476XX"
config SOC_STM32L476XG
bool "STM32L476XG"
select HAS_STM32CUBE
config SOC_STM32L432XC

View file

@ -8,4 +8,4 @@
config BOARD_NUCLEO_L476RG
bool "Nucleo L476RG Development Board"
depends on SOC_STM32L476XX
depends on SOC_STM32L476XG

View file

@ -2,7 +2,7 @@ CONFIG_ARM=y
CONFIG_BOARD_STM32_NUCLEO_L476RG=y
CONFIG_SOC_FAMILY_STM32=y
CONFIG_SOC_SERIES_STM32L4X=y
CONFIG_SOC_STM32L476XX=y
CONFIG_SOC_STM32L476XG=y
CONFIG_CORTEX_M_SYSTICK=y
# 80MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=80000000

View file

@ -36,7 +36,7 @@
#elif defined(CONFIG_SOC_STM32L475XG)
#define DT_FLASH_SIZE __SIZE_K(1024)
#define DT_SRAM_SIZE __SIZE_K(96)
#elif defined(CONFIG_SOC_STM32L476XX)
#elif defined(CONFIG_SOC_STM32L476XG)
#define DT_FLASH_SIZE __SIZE_K(1024)
#define DT_SRAM_SIZE __SIZE_K(96)
#elif defined(CONFIG_SOC_STM32L432XC)

View file

@ -15,7 +15,7 @@
#include <device.h>
#include <pwm.h>
#if defined(CONFIG_SOC_STM32F401XE) || defined(CONFIG_SOC_STM32L476XX)
#if defined(CONFIG_SOC_STM32F401XE) || defined(CONFIG_SOC_STM32L476XG)
#define PWM_DRIVER CONFIG_PWM_STM32_2_DEV_NAME
#define PWM_CHANNEL 1
#elif CONFIG_SOC_STM32F103XB

View file

@ -15,7 +15,7 @@
#include <device.h>
#include <pwm.h>
#if defined(CONFIG_SOC_STM32F401XE) || defined(CONFIG_SOC_STM32L476XX)
#if defined(CONFIG_SOC_STM32F401XE) || defined(CONFIG_SOC_STM32L476XG)
#define PWM_DRIVER CONFIG_PWM_STM32_2_DEV_NAME
#define PWM_CHANNEL 1
#elif CONFIG_SOC_STM32F103XB