patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

drivers/serial: ns16550: Remove unused Kconfig symbols

Browse source 
These symbols are not referenced anywhere. The values always come from
DTS, at least if https://github.com/zephyrproject-rtos/zephyr/pull/13760
was correct.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit is contained in:
Ulf Magnusson 2019-02-27 13:30:05 +01:00 committed by Anas Nashif
parent 23e75c1492
commit 2141cb740d
2 changed files with 0 additions and 58 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

56
drivers/serial/Kconfig.ns16550
View file

@ -67,34 +67,6 @@ menuconfig UART_NS16550_PORT_0
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
if !HAS_DTS
config UART_NS16550_PORT_0_NAME
string "Port 0 Device Name"
default "UART_0"
depends on UART_NS16550_PORT_0
help
This is the device name for UART, and is included in the device
struct.
if !HAS_DTS && !ARC
config UART_NS16550_PORT_0_IRQ_PRI
int "Port 0 Interrupt Priority"
default 0
depends on UART_NS16550_PORT_0
help
The interrupt priority for UART port.
endif
config UART_NS16550_PORT_0_BAUD_RATE
int "Port 0 Baud Rate"
default 0
depends on UART_NS16550_PORT_0
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
endif
config UART_NS16550_PORT_0_OPTIONS
int "Port 0 Options"
default 0
@ -134,34 +106,6 @@ menuconfig UART_NS16550_PORT_1
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
if !HAS_DTS
config UART_NS16550_PORT_1_NAME
string "Port 1 Device Name"
default "UART_1"
depends on UART_NS16550_PORT_1
help
This is the device name for UART, and is included in the device
struct.
if !HAS_DTS && !ARC
config UART_NS16550_PORT_1_IRQ_PRI
int "Port 1 Interrupt Priority"
default 0
depends on UART_NS16550_PORT_1
help
The interrupt priority for UART port.
endif
config UART_NS16550_PORT_1_BAUD_RATE
int "Port 1 Baud Rate"
default 0
depends on UART_NS16550_PORT_1
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
endif
config UART_NS16550_PORT_1_OPTIONS
int "Port 1 Options"
default 0

2
soc/nios2/nios2f-zephyr/Kconfig.defconfig
View file

@ -49,8 +49,6 @@ config UART_NS16550_PORT_0
if UART_NS16550_PORT_0
config UART_NS16550_PORT_0_IRQ_PRI
default 3
config UART_NS16550_PORT_0_OPTIONS
default 0