diff --git a/boards/arm/google_kukui/Kconfig.board b/boards/arm/google_kukui/Kconfig.board
index 4c4efa07cc..d3585a6bc2 100644
--- a/boards/arm/google_kukui/Kconfig.board
+++ b/boards/arm/google_kukui/Kconfig.board
@@ -11,4 +11,4 @@ config BOARD_GOOGLE_KUKUI
 	  Duet and 10e Chromebook Tablet. The EC handles battery charging,
 	  keyboard scanning, USB Power Delivery and sensors.
 
-	  So far for Zephyr only a simple serial console is supported.
+	  So far for Zephyr only a simple serial console and I2C are supported.
diff --git a/boards/arm/google_kukui/doc/index.rst b/boards/arm/google_kukui/doc/index.rst
index 5bcd7af27c..434541c4f6 100644
--- a/boards/arm/google_kukui/doc/index.rst
+++ b/boards/arm/google_kukui/doc/index.rst
@@ -61,6 +61,11 @@ Default Zephyr Peripheral Mapping:
 ----------------------------------
 
 - UART_1 TX/RX : PA10/PA9
+- I2C_1 SCL/SDA : PB8/PB9
+- I2C_2 SCL/SDA : PA11/PA12
+- Volume down : GPIOB pin 11
+- Volume up : GPIOB pin 10
+- Power : GPIOA pin 0
 
 Programming and Debugging
 *************************
diff --git a/boards/arm/google_kukui/google_kukui.dts b/boards/arm/google_kukui/google_kukui.dts
index f5b2e76eae..dde8dd3e4c 100644
--- a/boards/arm/google_kukui/google_kukui.dts
+++ b/boards/arm/google_kukui/google_kukui.dts
@@ -37,3 +37,13 @@
 		};
 	};
 };
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <I2C_BITRATE_FAST>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <I2C_BITRATE_FAST>;
+};
diff --git a/boards/arm/google_kukui/google_kukui_defconfig b/boards/arm/google_kukui/google_kukui_defconfig
index c1f9406076..a1456c3f7d 100644
--- a/boards/arm/google_kukui/google_kukui_defconfig
+++ b/boards/arm/google_kukui/google_kukui_defconfig
@@ -11,6 +11,9 @@ CONFIG_BOARD_GOOGLE_KUKUI=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 
+# I2C support
+CONFIG_I2C=y
+
 # Enable console
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
diff --git a/boards/arm/google_kukui/pinmux.c b/boards/arm/google_kukui/pinmux.c
index 8350d00ebc..c0a3389417 100644
--- a/boards/arm/google_kukui/pinmux.c
+++ b/boards/arm/google_kukui/pinmux.c
@@ -17,6 +17,14 @@ static const struct pin_config pinconf[] = {
 	{STM32_PIN_PA9, STM32F0_PINMUX_FUNC_PA9_USART1_TX},
 	{STM32_PIN_PA10, STM32F0_PINMUX_FUNC_PA10_USART1_RX},
 #endif
+#if DT_HAS_NODE(DT_NODELABEL(i2c1))
+	{STM32_PIN_PB8, STM32F0_PINMUX_FUNC_PB8_I2C1_SCL},
+	{STM32_PIN_PB9, STM32F0_PINMUX_FUNC_PB9_I2C1_SDA},
+#endif
+#if DT_HAS_NODE(DT_NODELABEL(i2c2))
+	{STM32_PIN_PA11, STM32F0_PINMUX_FUNC_PA11_I2C2_SCL},
+	{STM32_PIN_PA12, STM32F0_PINMUX_FUNC_PA12_I2C2_SDA},
+#endif
 };
 
 static int pinmux_stm32_init(struct device *port)