patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

boards: nucleo_f302r8: Use dts for clocks configuration

Browse source 
Convert board to use of device tree for clocks configuration.

Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This commit is contained in:
Alexandre Bourdiol 2021-04-30 17:56:07 +02:00 committed by Kumar Gala
parent 87df76c7f7
commit 53198f3d7a
2 changed files with 22 additions and 18 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
boards/arm/nucleo_f302r8/nucleo_f302r8.dts
View file

@ -42,6 +42,27 @@
};
};
&clk_hse {
hse-bypass;
clock-frequency = <DT_FREQ_M(8)>; /* STLink 8MHz clock */
status = "okay";
};
&pll {
prediv = <1>;
mul = <9>;
clocks = <&clk_hse>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(72)>;
ahb-prescaler = <1>;
apb1-prescaler = <2>;
apb2-prescaler = <1>;
};
&i2c1 {
pinctrl-0 = <&i2c1_scl_pb8 &i2c1_sda_pb9>;
status = "okay";

19
boards/arm/nucleo_f302r8/nucleo_f302r8_defconfig
View file

@ -2,8 +2,6 @@
CONFIG_SOC_SERIES_STM32F3X=y
CONFIG_SOC_STM32F302X8=y
# 72 MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000
CONFIG_SERIAL=y
@ -17,20 +15,5 @@ CONFIG_PINMUX=y
# enable GPIO
CONFIG_GPIO=y
# clock configuration
# Enable Clocks
CONFIG_CLOCK_CONTROL=y
# Clock configuration for Cube Clock control driver
CONFIG_CLOCK_STM32_HSE_CLOCK=8000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# use HSE as PLL input
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
# however, the board does not have an external oscillator, so just use
# the 8MHz clock signal coming from integrated STLink
CONFIG_CLOCK_STM32_HSE_BYPASS=y
# produce 72MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_PREDIV=1
CONFIG_CLOCK_STM32_PLL_MULTIPLIER=9
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=2
CONFIG_CLOCK_STM32_APB2_PRESCALER=1