patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity

samples: fully migrate basic samples to the new Sphinx extension

Browse source 
- Updated basic samples READMEs to use the new zephyr:code-sample::
  directive. Dropped "-sample" suffix that's not required anymore now
  that samples have their own namespace.
- Updated all references to the samples to use the :zephyr:code-sample:
  role. Checked and updated the wording of said references to account
  for the fact that samples should not have "... sample" in their name
  anymore.

Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit is contained in:
Benjamin Cabé 2023-09-05 23:58:56 +02:00 committed by Carles Cufí
parent 9d0deabba2
commit 59e4c5aed0
131 changed files with 214 additions and 209 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
boards/arc/nsim/doc/index.rst
View file

@ -107,7 +107,7 @@ The supported toolchains are listed in ``toolchain:`` array in ``.yaml`` file, w
particular toolchain.
Use this configuration to run basic Zephyr applications and kernel tests in
nSIM, for example, with the :ref:`synchronization_sample`:
nSIM, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arc/qemu_arc/doc/index.rst
View file

@ -67,7 +67,7 @@ Programming and Debugging
*************************
Use this configuration to run basic Zephyr applications and kernel tests in the QEMU
emulated environment, for example, with the :ref:`synchronization_sample`
emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample
(note you may use ``qemu_arc_em``, ``qemu_arc_hs``, ``qemu_arc_hs5x`` or
``qemu_arc_hs6x`` depending on target CPU):

2
boards/arm/adafruit_feather_nrf52840/doc/index.rst
View file

@ -113,7 +113,7 @@ Flashing
Flashing Zephyr onto the ``adafruit_feather_nrf52480`` board requires
an external programmer. The programmer is attached to the SWD header.
Build the Zephyr kernel and the :ref:`blinky-sample` sample application.
Build the Zephyr kernel and the :zephyr:code-sample:`blinky` sample application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/adafruit_feather_stm32f405/doc/index.rst
View file

@ -100,7 +100,7 @@ of the built in DFU-Util bootloader is possible by following the
Flashing
========
#. Build the Zephyr kernel and the :ref:`blinky-sample` sample application:
#. Build the Zephyr kernel and the :zephyr:code-sample:`blinky` sample application:
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

6
boards/arm/adafruit_itsybitsy_nrf52840/doc/index.rst
View file

@ -119,8 +119,8 @@ or the :ref:`cdc-acm-console` sample applications to see how this works.
Testing LEDs and buttons on the Adafruit ItsyBitsy nRF52840 Express
*******************************************************************
The :ref:`button-sample` sample lets you test the buttons (switches) and the red LED.
The :ref:`blinky-sample` sample lets you test the red LED.
The :zephyr:code-sample:`button` sample lets you test the buttons (switches) and the red LED.
The :zephyr:code-sample:`blinky` sample lets you test the red LED.
The DotStar LED has been implemented as a SPI device and can be tested
with the :ref:`led_apa102_sample` sample application.
@ -151,7 +151,7 @@ Flashing
Flashing is done by dragging and dropping the built Zephyr UF2-file
into the :code:`ITSY840BOOT` drive.
#. Build the Zephyr kernel and the :ref:`blinky-sample`
#. Build the Zephyr kernel and the :zephyr:code-sample:`blinky`
sample application:
.. zephyr-app-commands::

2
boards/arm/arduino_giga_r1/doc/index.rst
View file

@ -151,7 +151,7 @@ You should see the following message on the console:
Similarly, you can build and flash samples on the M4 target.
Here is an example for the :ref:`blinky-sample` application on M4 core.
Here is an example for the :zephyr:code-sample:`blinky` application on M4 core.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/arduino_portenta_h7/doc/index.rst
View file

@ -121,7 +121,7 @@ You should see the following message on the console:
Similarly, you can build and flash samples on the M4 target. For this, please
take care of the resource sharing (UART port used for console for instance).
Here is an example for the :ref:`blinky-sample` application on M4 core.
Here is an example for the :zephyr:code-sample:`blinky` application on M4 core.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/b_g474e_dpow1/doc/index.rst
View file

@ -120,7 +120,7 @@ The B-G474E-DPOW1 Discovery board includes an ST-LINK/V3E embedded debug tool in
Flashing an application to the B_G474E_DPOW1
--------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/b_u585i_iot02a/doc/index.rst
View file

@ -327,7 +327,7 @@ Debugging
=========
Default flasher for this board is openocd. It could be used in the usual way.
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/bl652_dvk/doc/bl652_dvk.rst
View file

@ -255,8 +255,8 @@ Testing the LEDs and buttons in the BL652 DVK
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/bl653_dvk/doc/bl653_dvk.rst
View file

@ -162,8 +162,8 @@ Testing the LEDs and buttons on the BL653 DVK
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/bl654_dvk/doc/bl654_dvk.rst
View file

@ -168,8 +168,8 @@ Testing the LEDs and buttons on the BL654 DVK
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/bl654_sensor_board/doc/bl654_sensor_board.rst
View file

@ -233,8 +233,8 @@ Testing the LED and button on the BL654 Sensor Board
There are 2 samples that allow you to test that the button (switch) and LED on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/bl654_usb/doc/bl654_usb.rst
View file

@ -130,7 +130,7 @@ before proceeding. These instructions were tested with version 6.1.0.
The blue LED should start a fade pattern, signalling the bootloader is
running.
#. Compile a Zephyr application; we'll use :ref:`blinky <blinky-sample>`.
#. Compile a Zephyr application; we'll use :zephyr:code-sample:`blinky`.
.. zephyr-app-commands::
:app: zephyr/samples/basic/blinky
@ -171,7 +171,7 @@ Testing the LED on the BL654 USB
There is a sample that allows you to test that the LED on
the board is working properly with Zephyr:
* :ref:`blinky-sample`
* :zephyr:code-sample:`blinky`
You can build and flash the example to make sure Zephyr is running correctly on
your board. The LED definitions can be found in

2
boards/arm/black_f407ve/doc/index.rst
View file

@ -202,7 +202,7 @@ This interface is supported by the openocd version included in Zephyr SDK.
Flashing an application to BLACK_F407VE
---------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
Run a serial host program to connect with your board:

2
boards/arm/black_f407zg_pro/doc/index.rst
View file

@ -184,7 +184,7 @@ This interface is supported by the openocd version included in Zephyr SDK.
Flashing an application to BLACK_F407ZG_PRO
-------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
Run a serial host program to connect with your board:

4
boards/arm/bt510/doc/bt510.rst
View file

@ -239,8 +239,8 @@ Testing the LEDs and buttons on the BT510
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button, LED and sensor device definitions can be found in

4
boards/arm/bt610/doc/bt610.rst
View file

@ -593,8 +593,8 @@ Testing the LEDs and buttons on the BT610
There are 2 samples that allow you to test that the buttons (switches) and LEDs
on the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly
on your board. The button, LED and sensor device definitions can be found in

4
boards/arm/circuitdojo_feather_nrf9160/doc/index.rst
View file

@ -142,8 +142,8 @@ Testing the LEDs and buttons on the nRF9160 Feather
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

2
boards/arm/cy8ckit_062_ble/doc/index.rst
View file

@ -190,7 +190,7 @@ Cy_WDT_Disable().
Running on Dual Core
********************
#. Build the Zephyr kernel and the :ref:`button-sample` sample application:
#. Build the Zephyr kernel and the :zephyr:code-sample:`button` sample application:
.. zephyr-app-commands::
:zephyr-app: samples/basic/button

2
boards/arm/cy8cproto_062_4343w/doc/index.rst
View file

@ -101,7 +101,7 @@ To fetch Binary Blobs:
Build blinking led sample
*************************
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. code-block:: console

4
boards/arm/ebyte_e73_tbb_nrf52832/doc/index.rst
View file

@ -206,8 +206,8 @@ the board are working properly with Zephyr:
.. code-block:: console
:ref:`blinky-sample`
:ref:`button-sample`
:zephyr:code-sample:`blinky`
:zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

2
boards/arm/fvp_baser_aemv8r_aarch32/doc/index.rst
View file

@ -77,7 +77,7 @@ Programming
===========
Use this configuration to build basic Zephyr applications and kernel tests in the
Arm FVP emulated environment, for example, with the :ref:`synchronization_sample`:
Arm FVP emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm/holyiot_yj16019/doc/index.rst
View file

@ -109,7 +109,7 @@ found in :ref:`nordic_segger_flashing`. Then build and flash
applications as usual (see :ref:`build_an_application` and
:ref:`application_run` for more details).
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/ip_k66f/doc/index.rst
View file

@ -118,7 +118,7 @@ The default flasher is ``jlink`` using the built-in SEGGER Jlink interface.
Flashing
========
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -130,7 +130,7 @@ Red LED0 should blink at 1 second delay.
Debugging
=========
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/lora_e5_dev_board/doc/lora_e5_dev_board.rst
View file

@ -263,7 +263,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

8
boards/arm/nrf51_ble400/doc/index.rst
View file

@ -199,10 +199,10 @@ Testing the LEDs and buttons in the nRF51 DK
There are samples below that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
- :ref:`blinky-sample`
- :ref:`button-sample`
- :ref:`fade-led-sample`
- :ref:`96b_carbon_multi_thread_blinky`
- :zephyr:code-sample:`blinky`
- :zephyr:code-sample:`button`
- :zephyr:code-sample:`fade-led`
- :zephyr:code-sample:`multi-thread-blinky`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

8
boards/arm/nrf51_vbluno51/doc/index.rst
View file

@ -106,7 +106,7 @@ The VBLUno51 board has on-board DAPLink (CMSIS-DAP) interface for flashing and d
You do not need any other programming device.
You only need to install pyOCD tool (https://pypi.python.org/pypi/pyOCD)
This tutorial uses the blinky application :ref:`blinky-sample`.
This tutorial uses the blinky application :zephyr:code-sample:`blinky`.
See the :ref:`getting_started` for general information on setting up
your development environment. Then build and flash the application in
@ -121,7 +121,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -136,8 +136,8 @@ Testing the VBLUno51 with Zephyr: buttons, LEDs, UART, BLE
components on the VBLUno51 board:
* :ref:`hello_world`
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
* :ref:`bluetooth-beacon-sample`
* :ref:`peripheral_hr`

2
boards/arm/nrf51dongle_nrf51422/doc/index.rst
View file

@ -132,7 +132,7 @@ Segger IC.
Testing the LEDs on the nRF51 Dongle
************************************
Build and flash the :ref:`blinky-sample` sample to test that the onboard LED
Build and flash the :zephyr:code-sample:`blinky` sample to test that the onboard LED
is working properly with Zephyr.
References

4
boards/arm/nrf52833dk_nrf52833/doc/index.rst
View file

@ -150,8 +150,8 @@ Testing the LEDs and buttons in the nRF52833 DK
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/nrf52840_blip/doc/index.rst
View file

@ -175,8 +175,8 @@ Testing the LEDs and buttons in the nRF52840 PDK
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

6
boards/arm/nrf52840dongle_nrf52840/doc/index.rst
View file

@ -140,7 +140,7 @@ device. Make sure ``nrfutil`` is installed before proceeding.
The red LED should start a fade pattern, signalling the bootloader is
running.
#. Compile a Zephyr application; we'll use :ref:`blinky <blinky-sample>`.
#. Compile a Zephyr application; we'll use :zephyr:code-sample:`blinky`.
.. zephyr-app-commands::
:app: zephyr/samples/basic/blinky
@ -298,7 +298,7 @@ flashed with an offset.
Then build and flash applications as usual (see :ref:`build_an_application` and
:ref:`application_run` for more details).
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -321,7 +321,7 @@ Testing the LEDs and buttons on the nRF52840 Dongle
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :zephyr:code-sample:`blinky`
You can build and program the examples to make sure Zephyr is running correctly
on your board.

10
boards/arm/nrf52_adafruit_feather/doc/index.rst
View file

@ -166,11 +166,11 @@ Testing the LEDs and buttons on the nRF52 Adafruit Feather
There are several samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
- :ref:`blinky-sample`
- :ref:`button-sample`
- :ref:`fade-led-sample`
- :ref:`pwm-blinky-sample`
- :ref:`96b_carbon_multi_thread_blinky`
- :zephyr:code-sample:`blinky`
- :zephyr:code-sample:`button`
- :zephyr:code-sample:`fade-led`
- :zephyr:code-sample:`pwm-blinky`
- :zephyr:code-sample:`multi-thread-blinky`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/nrf52_vbluno52/doc/index.rst
View file

@ -101,7 +101,7 @@ Here are some sample applications that you can use to test different
components on the VBLUno52 board:
* :ref:`hello_world`
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
* :ref:`bluetooth-beacon-sample`
* :ref:`peripheral_hr`

4
boards/arm/nrf5340dk_nrf5340/doc/index.rst
View file

@ -310,8 +310,8 @@ Testing the LEDs and buttons in the nRF5340 DK
There are 2 samples that allow you to test that the buttons (switches) and
LEDs on the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/nrf9160dk_nrf9160/doc/index.rst
View file

@ -245,8 +245,8 @@ Testing the LEDs and buttons in the nRF9160 DK
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

4
boards/arm/nrf9161dk_nrf9161/doc/index.rst
View file

@ -184,8 +184,8 @@ Testing the LEDs and buttons in the nRF9161 DK
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

2
boards/arm/nucleo_c031c6/doc/index.rst
View file

@ -127,7 +127,7 @@ Nucleo C031C6 board includes an ST-LINK/V2-1 embedded debug tool interface.
Flashing an application to Nucleo C031C6
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/nucleo_f030r8/doc/index.rst
View file

@ -149,7 +149,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo F030R8
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -169,7 +169,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/nucleo_f031k6/doc/index.rst
View file

@ -116,7 +116,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo F030R8
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -129,7 +129,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/nucleo_f042k6/doc/index.rst
View file

@ -116,7 +116,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo F042K6
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -129,7 +129,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_f070rb/doc/index.rst
View file

@ -144,7 +144,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo F070RB
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_f091rc/doc/index.rst
View file

@ -161,7 +161,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo F091RC
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/nucleo_f103rb/doc/index.rst
View file

@ -151,7 +151,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo F103RB
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -164,7 +164,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/nucleo_f334r8/doc/index.rst
View file

@ -143,7 +143,7 @@ Flashing an application to Nucleo F334R8
Connect the Nucleo F334R8 to your host computer using the USB port,
then build and flash an application. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -156,7 +156,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for
the :ref:`blinky-sample` application.
the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_g031k8/doc/index.rst
View file

@ -123,7 +123,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo G031K8
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_g070rb/doc/index.rst
View file

@ -155,7 +155,7 @@ Nucleo G070RB board includes an ST-LINK/V2-1 embedded debug tool interface.
Flashing an application to Nucleo G070RB
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_g071rb/doc/index.rst
View file

@ -159,7 +159,7 @@ Nucleo G071RB board includes an ST-LINK/V3 embedded debug tool interface.
Flashing an application to Nucleo G071RB
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_g0b1re/doc/index.rst
View file

@ -168,7 +168,7 @@ following pyocd command:
Flashing an application to Nucleo G0B1RE
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_h563zi/doc/index.rst
View file

@ -294,7 +294,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_h745zi_q/doc/index.rst
View file

@ -240,7 +240,7 @@ You should see the following message on the console:
Similarly, you can build and flash samples on the M4 target. For this, please
take care of the resource sharing (UART port used for console for instance).
Here is an example for the :ref:`blinky-sample` application on M4 core.
Here is an example for the :zephyr:code-sample:`blinky` application on M4 core.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_l011k4/doc/index.rst
View file

@ -131,7 +131,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo L011K4
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_l031k6/doc/index.rst
View file

@ -124,7 +124,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo L031K6
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_l053r8/doc/index.rst
View file

@ -140,7 +140,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo L053R8
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_l073rz/doc/index.rst
View file

@ -154,7 +154,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo L073RZ
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_l152re/doc/index.rst
View file

@ -148,7 +148,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo L152RE
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_u575zi_q/doc/index.rst
View file

@ -289,7 +289,7 @@ Debugging
=========
Default flasher for this board is openocd. It could be used in the usual way.
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_wb55rg/doc/nucleo_wb55rg.rst
View file

@ -288,7 +288,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_wba52cg/doc/nucleo_wba52cg.rst
View file

@ -232,7 +232,7 @@ as flashing tool by default.
Flashing an application to Nucleo WBA52CG
-----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/nucleo_wl55jc/doc/nucleo_wl55jc.rst
View file

@ -307,7 +307,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/olimex_lora_stm32wl_devkit/doc/olimex_lora_stm32wl_devkit.rst
View file

@ -136,7 +136,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/olimex_stm32_h103/doc/index.rst
View file

@ -208,7 +208,7 @@ The ``blackmagicprobe`` can also be used to program the device.
Flashing
========
Here is an example for the :ref:`button-sample` application.
Here is an example for the :zephyr:code-sample:`button` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/button

2
boards/arm/olimexino_stm32/doc/index.rst
View file

@ -414,7 +414,7 @@ Flashing an Application to OLIMEXINO-STM32
To upload an application to the OLIMEXINO-STM32 board a TTL(3.3V)
serial adapter is required. This tutorial uses the
:ref:`button-sample` sample application.
:zephyr:code-sample:`button` sample application.
#. Connect the serial cable to the UEXT lines of the UART
interface (pin #3=TX and pin #4=RX).

4
boards/arm/particle_argon/doc/index.rst
View file

@ -160,8 +160,8 @@ Testing the LEDs and buttons
There are 2 samples that allow you to test that the buttons (switches) and
LEDs on the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board.

4
boards/arm/particle_boron/doc/index.rst
View file

@ -156,8 +156,8 @@ Testing the LEDs and buttons
There are 2 samples that allow you to test that the buttons (switches) and
LEDs on the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board.

4
boards/arm/particle_xenon/doc/index.rst
View file

@ -161,8 +161,8 @@ Testing the LEDs and buttons
There are 2 samples that allow you to test that the buttons (switches) and
LEDs on the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board.

2
boards/arm/qemu_cortex_m0/doc/index.rst
View file

@ -64,7 +64,7 @@ Programming and Debugging
*************************
Use this configuration to run basic Zephyr applications and kernel tests in the QEMU
emulated environment, for example, with the :ref:`synchronization_sample`:
emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm/qemu_cortex_m3/doc/index.rst
View file

@ -70,7 +70,7 @@ Programming and Debugging
*************************
Use this configuration to run basic Zephyr applications and kernel tests in the QEMU
emulated environment, for example, with the :ref:`synchronization_sample`:
emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm/qemu_cortex_r5/doc/index.rst
View file

@ -64,7 +64,7 @@ Programming and Debugging
*************************
Use this configuration to run basic Zephyr applications and kernel tests in the
QEMU emulated environment, for example, with the :ref:`synchronization_sample`:
QEMU emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

4
boards/arm/reel_board/doc/index.rst
View file

@ -544,8 +544,8 @@ Testing the LEDs and buttons
There are 2 samples that allow you to test that the buttons (switches) and
LEDs on the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board.

6
boards/arm/rpi_pico/doc/index.rst
View file

@ -152,7 +152,7 @@ Using SEGGER JLink
You can Flash the rpi_pico with a SEGGER JLink debug probe as described in
:ref:`Building, Flashing and Debugging <west-flashing>`.
Here is an example of building and flashing the :ref:`blinky-sample` application.
Here is an example of building and flashing the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -187,7 +187,7 @@ Depending on the interface used (such as JLink), you might need to
checkout to a branch that supports this interface, before proceeding.
Build and install OpenOCD as described in the README.
Here is an example of building and flashing the :ref:`blinky-sample` application.
Here is an example of building and flashing the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -247,7 +247,7 @@ Using OpenOCD
Install OpenOCD as described for flashing the board.
Here is an example for debugging the :ref:`blinky-sample` application.
Here is an example for debugging the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/ruuvi_ruuvitag/doc/index.rst
View file

@ -168,8 +168,8 @@ Testing the LEDs and buttons on the RuuviTag
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in :file:`boards/arm/ruuvi_ruuvitag/ruuvi_ruuvitag.dts`.

2
boards/arm/s32z270dc2_r52/doc/index.rst
View file

@ -99,7 +99,7 @@ using GPIO driver or configuring the pinmuxing for the device drivers.
+-------------------+-------------+
This board does not include user LED's or switches, which are needed for some
of the samples such as :ref:`blinky-sample` or :ref:`button-sample`.
of the samples such as :zephyr:code-sample:`blinky` or :zephyr:code-sample:`button`.
Follow the steps described in the sample description to enable support for this
board.

4
boards/arm/segger_trb_stm32f407/doc/index.rst
View file

@ -109,7 +109,7 @@ Flashing an application to the SEGGER-TRB-STM32F407
Connect the J-Trace/J-Link USB dongle to your host computer and to the JTAG
port of the SEGGER-TRB-STM32F407 board. Then build and flash an application.
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -121,7 +121,7 @@ After resetting the board, you should see LED0 blink with a 1 second interval.
Debugging
=========
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/serpente/doc/index.rst
View file

@ -87,7 +87,7 @@ can be entered by quickly tapping the reset button twice.
Flashing
========
#. Build the Zephyr kernel and the :ref:`blinky-sample` sample application:
#. Build the Zephyr kernel and the :zephyr:code-sample:`blinky` sample application:
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/sparkfun_thing_plus_nrf9160/doc/index.rst
View file

@ -137,8 +137,8 @@ Testing the LEDs and buttons on the nRF9160 Thing Plus
There are 2 samples that allow you to test that the buttons (switches) and LEDs on
the board are working properly with Zephyr:
* :ref:`blinky-sample`
* :ref:`button-sample`
* :zephyr:code-sample:`blinky`
* :zephyr:code-sample:`button`
You can build and flash the examples to make sure Zephyr is running correctly on
your board. The button and LED definitions can be found in

2
boards/arm/stm3210c_eval/doc/index.rst
View file

@ -125,7 +125,7 @@ Flashing an application to STM3210C-EVAL
Connect the STM3210C-EVAL to your host computer using the USB port, then build
and flash an application in the usual way.
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32373c_eval/doc/index.rst
View file

@ -126,7 +126,7 @@ This interface is supported by the openocd version included in Zephyr SDK.
Flashing an application to STM32373C-EVAL
-----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -139,7 +139,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/stm32_min_dev/doc/index.rst
View file

@ -161,7 +161,7 @@ built and flashed in the usual way (see :ref:`build_an_application` and
Flashing
========
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32f030_demo/doc/index.rst
View file

@ -87,7 +87,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to STM32F030 DEMO BOARD
-----------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -100,7 +100,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32f072_eval/doc/index.rst
View file

@ -156,7 +156,7 @@ This interface is supported by the openocd version included in Zephyr SDK.
Flashing an application to STM32F072-EVAL
-------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -169,7 +169,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32f0_disco/doc/index.rst
View file

@ -107,7 +107,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application to Nucleo F030R8
----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -120,7 +120,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32f103_mini/doc/index.rst
View file

@ -133,7 +133,7 @@ pattern, which can be triggered by using the BOOT0 pin.
Flashing an application to stm32f103 mini
-----------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -146,7 +146,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32f411e_disco/doc/index.rst
View file

@ -141,7 +141,7 @@ Flashing an application to STM32F411E-DISCO
Connect the STM32F411E-DISCO Discovery kit to your host computer using the
USB port. Then build and flash an application.
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -162,7 +162,7 @@ Debugging
=========
You can debug applications in the usual way. Here is an example for
the :ref:`blinky-sample` application.
the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/stm32f4_disco/doc/index.rst
View file

@ -169,7 +169,7 @@ This interface is supported by the openocd version included in Zephyr SDK.
Flashing an application to STM32F4DISCOVERY
-------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
Run a serial host program to connect with your board:

2
boards/arm/stm32g0316_disco/doc/index.rst
View file

@ -100,7 +100,7 @@ the following pyocd command:
Flashing an application to the STM32G0316-DISCO
-----------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/stm32g071b_disco/doc/index.rst
View file

@ -130,7 +130,7 @@ The STM32G071B Discovery board includes an ST-LINK/V2-1 embedded debug tool inte
Flashing an application to the STM32G071B_DISCO
-----------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/stm32g081b_eval/doc/index.rst
View file

@ -168,7 +168,7 @@ The STM32G081B Evaluation board includes an ST-LINK/V2-1 embedded debug tool int
Flashing an application to the STM32G081B_EVAL
----------------------------------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/stm32h747i_disco/doc/index.rst
View file

@ -258,7 +258,7 @@ You should see the following message on the console:
Similarly, you can build and flash samples on the M4 target. For this, please
take care of the resource sharing (UART port used for console for instance).
Here is an example for the :ref:`blinky-sample` application on M4 core.
Here is an example for the :zephyr:code-sample:`blinky` application on M4 core.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32l1_disco/doc/index.rst
View file

@ -143,7 +143,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application
-----------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -156,7 +156,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

4
boards/arm/stm32vl_disco/doc/index.rst
View file

@ -137,7 +137,7 @@ This interface is supported by the openocd version included in the Zephyr SDK.
Flashing an application
-----------------------
Here is an example for the :ref:`blinky-sample` application.
Here is an example for the :zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky
@ -150,7 +150,7 @@ Debugging
=========
You can debug an application in the usual way. Here is an example for the
:ref:`blinky-sample` application.
:zephyr:code-sample:`blinky` application.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm/thingy52_nrf52832/doc/index.rst
View file

@ -362,7 +362,7 @@ debugger. A development board with a Debug out connector such as the
Testing board features
**********************
The green lightwell LED can be tested with the :ref:`blinky-sample` example.
The green lightwell LED can be tested with the :zephyr:code-sample:`blinky` example.
.. zephyr-app-commands::
:zephyr-app: samples/basic/blinky

2
boards/arm64/fvp_base_revc_2xaemv8a/doc/index.rst
View file

@ -72,7 +72,7 @@ Programming
===========
Use this configuration to build basic Zephyr applications and kernel tests in the
ARM FVP emulated environment, for example, with the :ref:`synchronization_sample`:
ARM FVP emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm64/fvp_baser_aemv8r/doc/index.rst
View file

@ -86,7 +86,7 @@ Programming
===========
Use this configuration to build basic Zephyr applications and kernel tests in the
Arm FVP emulated environment, for example, with the :ref:`synchronization_sample`:
Arm FVP emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm64/mimx8mm_evk/doc/index.rst
View file

@ -92,7 +92,7 @@ Or kick SMP zephyr.bin:
Use this configuration to run basic Zephyr applications and kernel tests,
for example, with the :ref:`synchronization_sample`:
for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm64/mimx8mn_evk/doc/index.rst
View file

@ -92,7 +92,7 @@ Or kick SMP zephyr.bin:
Use this configuration to run basic Zephyr applications and kernel tests,
for example, with the :ref:`synchronization_sample`:
for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm64/mimx8mp_evk/doc/index.rst
View file

@ -91,7 +91,7 @@ Or kick SMP zephyr.bin:
mw 303d0518 f 1; fatload mmc 1:1 0xc0000000 zephyr.bin; dcache flush; icache flush; dcache off; icache off; cpu 2 release 0xc0000000
Use this configuration to run basic Zephyr applications and kernel tests,
for example, with the :ref:`synchronization_sample`:
for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm64/mimx93_evk/doc/index.rst
View file

@ -97,7 +97,7 @@ Or use the following command to kick zephyr.bin to Cortex-A55 Core0:
Use this configuration to run basic Zephyr applications and kernel tests,
for example, with the :ref:`synchronization_sample`:
for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

2
boards/arm64/nxp_ls1046ardb/doc/index.rst
View file

@ -84,7 +84,7 @@ Programming and Debugging
*************************
Use the following configuration to run basic Zephyr applications and
kernel tests on LS1046A RDB board. For example, with the :ref:`synchronization_sample`:
kernel tests on LS1046A RDB board. For example, with the :zephyr:code-sample:`synchronization` sample:
1. Non-SMP mode

2
boards/arm64/qemu_cortex_a53/doc/index.rst
View file

@ -60,7 +60,7 @@ Programming and Debugging
*************************
Use this configuration to run basic Zephyr applications and kernel tests in the QEMU
emulated environment, for example, with the :ref:`synchronization_sample`:
emulated environment, for example, with the :zephyr:code-sample:`synchronization` sample:
.. zephyr-app-commands::
:zephyr-app: samples/synchronization

Some files were not shown because too many files have changed in this diff Show more