drivers: gpio: initial device driver for ENE KB1200
Add GPIO driver for ENE KB1200 Signed-off-by: Steven Chang <steven@ene.com.tw>
This commit is contained in:
parent
f66e8afe7c
commit
62245b3ba9
|
@ -89,6 +89,7 @@ zephyr_library_sources_ifdef(CONFIG_GPIO_TLE9104 gpio_tle9104.c)
|
|||
zephyr_library_sources_ifdef(CONFIG_GPIO_ALTERA_PIO gpio_altera_pio.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_GPIO_BCM2711 gpio_bcm2711.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_GPIO_RENESAS_RA gpio_renesas_ra.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_GPIO_ENE_KB1200 gpio_ene_kb1200.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_GPIO_RZT2M gpio_rzt2m.c)
|
||||
zephyr_library_sources_ifdef(CONFIG_GPIO_AMBIQ gpio_ambiq.c)
|
||||
|
||||
|
|
|
@ -236,6 +236,8 @@ source "drivers/gpio/Kconfig.bcm2711"
|
|||
|
||||
source "drivers/gpio/Kconfig.renesas_ra"
|
||||
|
||||
source "drivers/gpio/Kconfig.ene"
|
||||
|
||||
source "drivers/gpio/Kconfig.rzt2m"
|
||||
|
||||
source "drivers/gpio/Kconfig.ambiq"
|
||||
|
|
9
drivers/gpio/Kconfig.ene
Normal file
9
drivers/gpio/Kconfig.ene
Normal file
|
@ -0,0 +1,9 @@
|
|||
# Copyright (c) 2024 ENE Technology Inc.
|
||||
# SPDX-License-Identifier: Apache-2.0
|
||||
|
||||
config GPIO_ENE_KB1200
|
||||
bool "ENE KB1200 GPIO Driver"
|
||||
default y
|
||||
depends on DT_HAS_ENE_KB1200_GPIO_ENABLED
|
||||
help
|
||||
Enable support for the kb1200 GPIO controllers.
|
210
drivers/gpio/gpio_ene_kb1200.c
Normal file
210
drivers/gpio/gpio_ene_kb1200.c
Normal file
|
@ -0,0 +1,210 @@
|
|||
/*
|
||||
* Copyright (c) 2023 ENE Technology Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#define DT_DRV_COMPAT ene_kb1200_gpio
|
||||
|
||||
#include <zephyr/drivers/gpio.h>
|
||||
#include <zephyr/kernel.h>
|
||||
#include <zephyr/drivers/gpio/gpio_utils.h>
|
||||
#include <zephyr/sys/util_macro.h>
|
||||
#include <reg/gpio.h>
|
||||
#include <reg/gptd.h>
|
||||
|
||||
struct gpio_kb1200_data {
|
||||
/* gpio_driver_data needs to be first */
|
||||
struct gpio_driver_data common;
|
||||
sys_slist_t cb;
|
||||
};
|
||||
|
||||
struct gpio_kb1200_config {
|
||||
/* gpio_driver_config needs to be first */
|
||||
struct gpio_driver_config common;
|
||||
/* base address of GPIO port */
|
||||
struct gpio_regs *gpio_regs;
|
||||
struct gptd_regs *gptd_regs;
|
||||
};
|
||||
|
||||
static void gpio_kb1200_isr(const struct device *dev)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
struct gpio_kb1200_data *context = dev->data;
|
||||
uint32_t pending_flag = config->gptd_regs->GPTDPF;
|
||||
|
||||
gpio_fire_callbacks(&context->cb, dev, pending_flag);
|
||||
config->gptd_regs->GPTDPF |= pending_flag;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_pin_configure(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
|
||||
WRITE_BIT(config->gpio_regs->GPIOFS, pin, 0);
|
||||
if ((flags & GPIO_OUTPUT) != 0) {
|
||||
WRITE_BIT(config->gpio_regs->GPIOIE, pin, 1);
|
||||
if ((flags & GPIO_SINGLE_ENDED) != 0) {
|
||||
if (flags & GPIO_LINE_OPEN_DRAIN) {
|
||||
WRITE_BIT(config->gpio_regs->GPIOOD, pin, 1);
|
||||
}
|
||||
} else {
|
||||
WRITE_BIT(config->gpio_regs->GPIOOD, pin, 0);
|
||||
}
|
||||
if (flags & GPIO_PULL_UP) {
|
||||
WRITE_BIT(config->gpio_regs->GPIOPU, pin, 1);
|
||||
} else {
|
||||
WRITE_BIT(config->gpio_regs->GPIOPU, pin, 0);
|
||||
}
|
||||
if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0) {
|
||||
WRITE_BIT(config->gpio_regs->GPIOD, pin, 1);
|
||||
} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0) {
|
||||
WRITE_BIT(config->gpio_regs->GPIOD, pin, 0);
|
||||
}
|
||||
WRITE_BIT(config->gpio_regs->GPIOOE, pin, 1);
|
||||
} else {
|
||||
WRITE_BIT(config->gpio_regs->GPIOOE, pin, 0);
|
||||
if (flags & GPIO_PULL_UP) {
|
||||
WRITE_BIT(config->gpio_regs->GPIOPU, pin, 1);
|
||||
} else {
|
||||
WRITE_BIT(config->gpio_regs->GPIOPU, pin, 0);
|
||||
}
|
||||
WRITE_BIT(config->gpio_regs->GPIOIE, pin, 1);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_port_get_raw(const struct device *dev, gpio_port_value_t *value)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
|
||||
*value = config->gpio_regs->GPIOIN;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
|
||||
gpio_port_value_t value)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
|
||||
config->gpio_regs->GPIOD |= (value & mask);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
|
||||
config->gpio_regs->GPIOD |= pins;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
|
||||
config->gpio_regs->GPIOD &= ~pins;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
|
||||
config->gpio_regs->GPIOD ^= pins;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
|
||||
enum gpio_int_mode mode, enum gpio_int_trig trig)
|
||||
{
|
||||
const struct gpio_kb1200_config *config = dev->config;
|
||||
|
||||
/* Check if GPIO port needs interrupt support */
|
||||
if ((mode & GPIO_INT_DISABLE) || (mode & GPIO_INT_ENABLE) == 0) {
|
||||
/* Set the mask to disable the interrupt */
|
||||
WRITE_BIT(config->gptd_regs->GPTDIE, pin, 0);
|
||||
} else {
|
||||
if (mode & GPIO_INT_EDGE) {
|
||||
WRITE_BIT(config->gptd_regs->GPTDEL, pin, 0);
|
||||
if (trig & GPIO_INT_HIGH_1) {
|
||||
if (trig & GPIO_INT_LOW_0) { /* Falling & Rising edge trigger */
|
||||
/* Enable toggle trigger */
|
||||
WRITE_BIT(config->gptd_regs->GPTDCHG, pin, 1);
|
||||
} else { /* Rising edge */
|
||||
/* Disable toggle trigger */
|
||||
WRITE_BIT(config->gptd_regs->GPTDCHG, pin, 0);
|
||||
WRITE_BIT(config->gptd_regs->GPTDPS, pin, 1);
|
||||
}
|
||||
} else { /* Falling edge */
|
||||
/* Disable Toggle trigger */
|
||||
WRITE_BIT(config->gptd_regs->GPTDCHG, pin, 0);
|
||||
WRITE_BIT(config->gptd_regs->GPTDPS, pin, 0);
|
||||
}
|
||||
} else {
|
||||
WRITE_BIT(config->gptd_regs->GPTDEL, pin, 1);
|
||||
/* Disable Toggle trigger */
|
||||
WRITE_BIT(config->gptd_regs->GPTDCHG, pin, 0);
|
||||
if (trig & GPIO_INT_HIGH_1) {
|
||||
WRITE_BIT(config->gptd_regs->GPTDPS, pin, 1);
|
||||
} else {
|
||||
WRITE_BIT(config->gptd_regs->GPTDPS, pin, 0);
|
||||
}
|
||||
}
|
||||
/* clear pending flag */
|
||||
WRITE_BIT(config->gptd_regs->GPTDPF, pin, 1);
|
||||
/* Enable the interrupt */
|
||||
WRITE_BIT(config->gptd_regs->GPTDIE, pin, 1);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kb1200_gpio_manage_callback(const struct device *dev, struct gpio_callback *cb, bool set)
|
||||
{
|
||||
struct gpio_kb1200_data *context = dev->data;
|
||||
|
||||
gpio_manage_callback(&context->cb, cb, set);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static uint32_t kb1200_gpio_get_pending_int(const struct device *dev)
|
||||
{
|
||||
const struct gpio_kb1200_config *const config = dev->config;
|
||||
|
||||
return config->gptd_regs->GPTDPF;
|
||||
}
|
||||
|
||||
static const struct gpio_driver_api kb1200_gpio_api = {
|
||||
.pin_configure = kb1200_gpio_pin_configure,
|
||||
.port_get_raw = kb1200_gpio_port_get_raw,
|
||||
.port_set_masked_raw = kb1200_gpio_port_set_masked_raw,
|
||||
.port_set_bits_raw = kb1200_gpio_port_set_bits_raw,
|
||||
.port_clear_bits_raw = kb1200_gpio_port_clear_bits_raw,
|
||||
.port_toggle_bits = kb1200_gpio_port_toggle_bits,
|
||||
.pin_interrupt_configure = kb1200_gpio_pin_interrupt_configure,
|
||||
.manage_callback = kb1200_gpio_manage_callback,
|
||||
.get_pending_int = kb1200_gpio_get_pending_int,
|
||||
};
|
||||
|
||||
#define KB1200_GPIO_INIT(n) \
|
||||
static int kb1200_gpio_##n##_init(const struct device *dev) \
|
||||
{ \
|
||||
IRQ_CONNECT(DT_INST_IRQ_BY_IDX(n, 0, irq), DT_INST_IRQ_BY_IDX(n, 0, priority), \
|
||||
gpio_kb1200_isr, DEVICE_DT_INST_GET(n), 0); \
|
||||
irq_enable(DT_INST_IRQ_BY_IDX(n, 0, irq)); \
|
||||
IRQ_CONNECT(DT_INST_IRQ_BY_IDX(n, 1, irq), DT_INST_IRQ_BY_IDX(n, 1, priority), \
|
||||
gpio_kb1200_isr, DEVICE_DT_INST_GET(n), 0); \
|
||||
irq_enable(DT_INST_IRQ_BY_IDX(n, 1, irq)); \
|
||||
return 0; \
|
||||
}; \
|
||||
static const struct gpio_kb1200_config port_##n##_kb1200_config = { \
|
||||
.common = {.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n)}, \
|
||||
.gpio_regs = (struct gpio_regs *)DT_INST_REG_ADDR_BY_IDX(n, 0), \
|
||||
.gptd_regs = (struct gptd_regs *)DT_INST_REG_ADDR_BY_IDX(n, 1), \
|
||||
}; \
|
||||
static struct gpio_kb1200_data gpio_kb1200_##n##_data; \
|
||||
DEVICE_DT_INST_DEFINE(n, &kb1200_gpio_##n##_init, NULL, &gpio_kb1200_##n##_data, \
|
||||
&port_##n##_kb1200_config, POST_KERNEL, \
|
||||
CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &kb1200_gpio_api);
|
||||
|
||||
DT_INST_FOREACH_STATUS_OKAY(KB1200_GPIO_INIT)
|
Loading…
Reference in a new issue