diff --git a/boards/u-blox/ubx_bmd300eval/doc/index.rst b/boards/u-blox/ubx_bmd300eval/doc/index.rst
index 43e8d1d9fe..d1aea13208 100644
--- a/boards/u-blox/ubx_bmd300eval/doc/index.rst
+++ b/boards/u-blox/ubx_bmd300eval/doc/index.rst
@@ -387,7 +387,7 @@ There are 2 samples that allow you to test that the buttons
 
 You can build and flash the examples to make sure Zephyr is
 running correctly on your board. The button and LED definitions
-can be found in :zephyr_file:`boards/ublox/ubx_bmd300eval/ubx_bmd300eval_nrf52832.dts`.
+can be found in :zephyr_file:`boards/u-blox/ubx_bmd300eval/ubx_bmd300eval_nrf52832.dts`.
 
 References
 **********
diff --git a/boards/u-blox/ubx_bmd330eval/doc/index.rst b/boards/u-blox/ubx_bmd330eval/doc/index.rst
index d23b576f8f..3f065cfc6d 100644
--- a/boards/u-blox/ubx_bmd330eval/doc/index.rst
+++ b/boards/u-blox/ubx_bmd330eval/doc/index.rst
@@ -378,7 +378,7 @@ There are 2 samples that allow you to test that the buttons
 
 You can build and flash the examples to make sure Zephyr is
 running correctly on your board. The button and LED definitions
-can be found in :zephyr_file:`boards/ublox/ubx_bmd330eval/ubx_bmd330eval_nrf52810.dts`.
+can be found in :zephyr_file:`boards/u-blox/ubx_bmd330eval/ubx_bmd330eval_nrf52810.dts`.
 
 References
 **********
diff --git a/boards/u-blox/ubx_bmd340eval/doc/index.rst b/boards/u-blox/ubx_bmd340eval/doc/index.rst
index bb1afcfa7f..4e1fed4e8a 100644
--- a/boards/u-blox/ubx_bmd340eval/doc/index.rst
+++ b/boards/u-blox/ubx_bmd340eval/doc/index.rst
@@ -448,7 +448,7 @@ There are 2 samples that allow you to test that the buttons
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found
 in
-:zephyr_file:`boards/ublox/ubx_bmd340eval/ubx_bmd340eval_nrf52840.dts`.
+:zephyr_file:`boards/u-blox/ubx_bmd340eval/ubx_bmd340eval_nrf52840.dts`.
 
 Using UART1
 ***********
diff --git a/boards/u-blox/ubx_bmd345eval/doc/index.rst b/boards/u-blox/ubx_bmd345eval/doc/index.rst
index e63507eb4f..0bcb1d201d 100644
--- a/boards/u-blox/ubx_bmd345eval/doc/index.rst
+++ b/boards/u-blox/ubx_bmd345eval/doc/index.rst
@@ -460,7 +460,7 @@ There are 2 samples that allow you to test that the buttons
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found
 in
-:zephyr_file:`boards/ublox/ubx_bmd345eval/ubx_bmd345eval_nrf52840.dts`.
+:zephyr_file:`boards/u-blox/ubx_bmd345eval/ubx_bmd345eval_nrf52840.dts`.
 
 Using UART1
 ***********
diff --git a/boards/u-blox/ubx_bmd360eval/doc/index.rst b/boards/u-blox/ubx_bmd360eval/doc/index.rst
index 9ce29132c1..556620a176 100644
--- a/boards/u-blox/ubx_bmd360eval/doc/index.rst
+++ b/boards/u-blox/ubx_bmd360eval/doc/index.rst
@@ -376,7 +376,7 @@ There are 2 samples that allow you to test that the buttons
 
 You can build and flash the examples to make sure Zephyr is
 running correctly on your board. The button and LED definitions
-can be found in :zephyr_file:`boards/ublox/ubx_bmd360eval/ubx_bmd360eval_nrf52811.dts`.
+can be found in :zephyr_file:`boards/u-blox/ubx_bmd360eval/ubx_bmd360eval_nrf52811.dts`.
 
 References
 **********
diff --git a/boards/u-blox/ubx_bmd380eval/doc/index.rst b/boards/u-blox/ubx_bmd380eval/doc/index.rst
index 1c89222536..1547cfc301 100644
--- a/boards/u-blox/ubx_bmd380eval/doc/index.rst
+++ b/boards/u-blox/ubx_bmd380eval/doc/index.rst
@@ -445,7 +445,7 @@ There are 2 samples that allow you to test that the buttons
 
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found in
-:zephyr_file:`boards/ublox/ubx_bmd340eval/ubx_bmd340eval_nrf52840.dts`.
+:zephyr_file:`boards/u-blox/ubx_bmd340eval/ubx_bmd340eval_nrf52840.dts`.
 
 Using UART1
 ***********
diff --git a/boards/u-blox/ubx_evkannab1/doc/index.rst b/boards/u-blox/ubx_evkannab1/doc/index.rst
index 88ed4f5511..f464ab5265 100644
--- a/boards/u-blox/ubx_evkannab1/doc/index.rst
+++ b/boards/u-blox/ubx_evkannab1/doc/index.rst
@@ -150,7 +150,7 @@ and LEDs on the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found in
-:zephyr_file:`boards/ublox/ubx_evkannab1/ubx_evkannab1_nrf52832.dts`.
+:zephyr_file:`boards/u-blox/ubx_evkannab1/ubx_evkannab1_nrf52832.dts`.
 
 Note that the buttons on the EVK-ANNA-B1 are marked SW1 and SW2, which
 are named sw0 and sw1 in the dts file.
diff --git a/boards/u-blox/ubx_evkninab1/doc/index.rst b/boards/u-blox/ubx_evkninab1/doc/index.rst
index 9b296624ad..9073c22358 100644
--- a/boards/u-blox/ubx_evkninab1/doc/index.rst
+++ b/boards/u-blox/ubx_evkninab1/doc/index.rst
@@ -158,7 +158,7 @@ and LEDs on the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found in
-:zephyr_file:`boards/ublox/ubx_evkninab1/ubx_evkninab1_nrf52832.dts`.
+:zephyr_file:`boards/u-blox/ubx_evkninab1/ubx_evkninab1_nrf52832.dts`.
 
 Note that the buttons on the EVK-NINA-B1 are marked SW1 and SW2, which
 are named sw0 and sw1 in the dts file.
diff --git a/boards/u-blox/ubx_evkninab3/doc/index.rst b/boards/u-blox/ubx_evkninab3/doc/index.rst
index 941c58eccd..fb8b0159b3 100644
--- a/boards/u-blox/ubx_evkninab3/doc/index.rst
+++ b/boards/u-blox/ubx_evkninab3/doc/index.rst
@@ -261,7 +261,7 @@ There are 2 samples that allow you to test that the buttons
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/ublox/ubx_evkninab3/ubx_evkninab3_nrf52840.dts`.
+:zephyr_file:`boards/u-blox/ubx_evkninab3/ubx_evkninab3_nrf52840.dts`.
 
 Using UART1
 ***********
diff --git a/boards/u-blox/ubx_evkninab4/doc/index.rst b/boards/u-blox/ubx_evkninab4/doc/index.rst
index 872b778b7e..5ad6289b59 100644
--- a/boards/u-blox/ubx_evkninab4/doc/index.rst
+++ b/boards/u-blox/ubx_evkninab4/doc/index.rst
@@ -153,7 +153,7 @@ and LEDs on the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found in
-:zephyr_file:`boards/ublox/ubx_evkninab4/ubx_evkninab4_nrf52833.dts`.
+:zephyr_file:`boards/u-blox/ubx_evkninab4/ubx_evkninab4_nrf52833.dts`.
 
 Note that the buttons on the EVK-NINA-B4 are marked SW1 and SW2, which
 are named sw0 and sw1 in the dts file.