patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

tests: boards: mec15: move the qspi test to new ztest API

Browse source 
Migrate the testsuite tests/boards/mec15xxevb_assy6853/qspi
to the new ztest API.

Signed-off-by: Enjia Mai <enjia.mai@intel.com>
This commit is contained in:
Enjia Mai 2022-08-20 21:47:33 +08:00 committed by Carles Cufí
parent 152190ad61
commit 633db922c9
2 changed files with 69 additions and 35 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
tests/boards/mec15xxevb_assy6853/qspi/prj.conf
View file

@ -1,4 +1,5 @@
CONFIG_SPI=y
CONFIG_SPI_EXTENDED_MODES=y
CONFIG_ZTEST=y
CONFIG_ZTEST_NEW_API=y
CONFIG_TEST_USERSPACE=y

103
tests/boards/mec15xxevb_assy6853/qspi/src/main.c
View file

@ -46,17 +46,9 @@ struct spi_buf_set tx_bufs, rx_bufs;
struct spi_buf txb[MAX_TX_BUF], rxb;
struct spi_config spi_cfg_single, spi_cfg_dual, spi_cfg_quad;
/**
* @brief Test spi device
* @details
* - Find spi device
* - Read flash jedec id
*/
void test_spi_device(void)
{
uint32_t jedec_id;
int ret;
static void spi_single_init(void)
{
/* configure spi as single mode */
spi_cfg_single.frequency = TEST_FREQ_HZ;
spi_cfg_single.operation = SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB
@ -65,6 +57,18 @@ void test_spi_device(void)
spi_cfg_single.cs = NULL;
zassert_true(device_is_ready(spi_dev), "SPI controller device is not ready");
}
/**
* @brief Test spi device
* @details
* - Find spi device
* - Read flash jedec id
*/
ZTEST_USER(spi, test_spi_device)
{
uint32_t jedec_id;
int ret;
/* read jedec id */
memset(safbuf, 0, TEST_BUF_SIZE);
@ -98,7 +102,7 @@ void test_spi_device(void)
* - erase data in flash device
* - read register1 and wait for erase operation completed
*/
void test_spi_sector_erase(void)
ZTEST_USER(spi_sec_erase, test_spi_sector_erase)
{
int ret;
@ -174,7 +178,7 @@ void test_spi_sector_erase(void)
* - flash write enable
* - write data into flash using spi api
*/
void test_spi_single_write(void)
static void test_spi_single_write(void)
{
int ret;
@ -225,7 +229,7 @@ void test_spi_single_write(void)
* - read data using spi single mode
* - check read buffer data whether correct
*/
void test_spi_single_read(void)
ZTEST_USER(spi, test_spi_single_read)
{
int ret;
uint8_t cnt = 0;
@ -271,6 +275,17 @@ void test_spi_single_read(void)
"Buffer read data is different to write data");
}
static void spi_dual_init(void)
{
/* configure spi dual mode */
spi_cfg_dual.frequency = TEST_FREQ_HZ;
spi_cfg_dual.operation = SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB
| SPI_WORD_SET(8) | SPI_LINES_DUAL;
spi_cfg_dual.slave = 0;
spi_cfg_dual.cs = NULL;
zassert_true(device_is_ready(spi_dev), "SPI controller device is not ready");
}
/**
* @brief Read data from flash using spi dual mode
@ -278,18 +293,13 @@ void test_spi_single_read(void)
* - read data using spi dual mode
* - check read buffer data whether correct
*/
void test_spi_dual_read(void)
ZTEST_USER(spi, test_spi_dual_read)
{
int ret;
uint8_t cnt = 0;
uint16_t spi_opcode;
/* configure spi dual mode */
spi_cfg_dual.frequency = TEST_FREQ_HZ;
spi_cfg_dual.operation = SPI_OP_MODE_MASTER | SPI_TRANSFER_MSB
| SPI_WORD_SET(8) | SPI_LINES_DUAL;
spi_cfg_dual.slave = 0;
spi_cfg_dual.cs = NULL;
spi_dual_init();
spi_opcode = SPI_DUAL_FAST_READ_DATA;
@ -351,7 +361,7 @@ void test_spi_dual_read(void)
* - check and make sure spi quad mode is enabled
* - write data using spi quad mode
*/
void test_spi_quad_write(void)
static void test_spi_quad_write(void)
{
int ret;
uint8_t spi_status2;
@ -527,7 +537,7 @@ void test_spi_quad_write(void)
* - read data using spi quad mode
* - check read buffer data whether correct
*/
void test_spi_quad_read(void)
ZTEST_USER(spi_quad, test_spi_quad_read)
{
int ret;
uint8_t cnt = 0;
@ -593,7 +603,7 @@ void test_spi_quad_read(void)
* - read data using spi octal quad mode
* - check read buffer data whether correct
*/
void test_spi_octal_read(void)
ZTEST_USER(spi_quad, test_spi_octal_read)
{
int ret;
@ -653,17 +663,40 @@ void test_spi_octal_read(void)
zassert_true(ret == 0, "Spi release failure: error %d", ret);
}
void test_main(void)
void *spi_setup(void)
{
ztest_test_suite(test_spi,
ztest_user_unit_test(test_spi_device),
ztest_user_unit_test(test_spi_sector_erase),
ztest_user_unit_test(test_spi_single_write),
ztest_user_unit_test(test_spi_single_read),
ztest_user_unit_test(test_spi_dual_read),
ztest_user_unit_test(test_spi_quad_write),
ztest_user_unit_test(test_spi_quad_read),
ztest_user_unit_test(test_spi_octal_read)
);
ztest_run_test_suite(test_spi);
spi_single_init();
return NULL;
}
void *spi_single_setup(void)
{
spi_single_init();
/* The writing test goes
* first berfore testing
* the reading.
*/
test_spi_single_write();
return NULL;
}
void *spi_quad_setup(void)
{
spi_dual_init();
/* The writing test goes
* first berfore testing
* the reading.
*/
test_spi_quad_write();
return NULL;
}
ZTEST_SUITE(spi, NULL, spi_single_setup, NULL, NULL, NULL);
ZTEST_SUITE(spi_quad, NULL, spi_quad_setup, NULL, NULL, NULL);
ZTEST_SUITE(spi_sector_erase, NULL, spi_setup, NULL, NULL, NULL);