patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

doc: release note 3.2: Update for STM32

Browse source 
Update V3.2.0 release notes with STM32 entries

Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit is contained in:
Erwan Gouriou 2022-09-21 10:01:32 +02:00 committed by Fabio Baltieri
parent 7b065e2138
commit 82be048286
1 changed files with 29 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

29
doc/releases/release-notes-3.2.rst
View file

@ -222,6 +222,8 @@ Boards & SoC Support
* Added support for these ARM boards:
* da1469x_dk_pro
* ST STM32F7508-DK Discovery Kit
* WeAct Studio Black Pill V3.0
* Added support for these ARM64 boards:
@ -243,6 +245,8 @@ Drivers and Sensors
* ADC
* STM32: Now supports Vbat monitoring channel and STM32U5 series.
* Audio
* CAN
@ -260,6 +264,11 @@ Drivers and Sensors
* The Zephyr network CAN bus driver, which provides raw L2 access to the CAN bus via a CAN
controller driver, has been moved to :zephyr_file:`drivers/net/canbus.c` and can now be enabled
using :kconfig:option:`CONFIG_NET_CANBUS`.
* STM32: Now supports dual CAN instances.
* Clock control
* STM32: PLL_P, PLL_Q, PLL_R outputs can now be used as domain clock.
* Clock Control
@ -267,6 +276,9 @@ Drivers and Sensors
* Counter
* STM32: RTC : Now supports STM32U5 and STM32F1 series.
* STM32: Timer : Now supports STM32L4 series.
* Crypto
* DAC
@ -282,6 +294,8 @@ Drivers and Sensors
* DMA
* STM32: Now supports stm32u5 series.
* EEPROM
* Added Microchip XEC (MEC172x) on-chip EEPROM driver. See the
@ -296,6 +310,7 @@ Drivers and Sensors
* Flash
* Added flash driver for Renesas Smartbond platform
* STM32: Added OSPI NOR-flash driver. Supports STM32H7 and STM32U5. Supports DMA.
* GPIO
@ -305,6 +320,8 @@ Drivers and Sensors
* I2C
* STM32: support for second target address was added.
* I2S
* I3C
@ -358,11 +375,14 @@ Drivers and Sensors
* Serial
* Added serial driver for Renesas Smartbond platform
* The STM32 driver now allows to use serial device as stop mode wake up source.
* SPI
* Timer
* STM32 LPTIM based timer should now be configured using device tree.
* USB
* W1
@ -467,6 +487,8 @@ Libraries / Subsystems
* SD Subsystem
* SDMMC STM32: Added DMA support and now compatible with STM32L5 series.
* Settings
* Shell
@ -498,6 +520,13 @@ HALs
* STM32
* stm32cube: update stm32f7 to cube version V1.17.0
* stm32cube: update stm32g0 to cube version V1.6.1
* stm32cube: update stm32g4 to cube version V1.5.1
* stm32cube: update stm32l4 to cube version V1.17.2
* stm32cube: update stm32u5 to cube version V1.1.1
* stm32cube: update stm32wb to cube version V1.14.0
* Silabs
* TI