patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity

dts: arm: Remove label property from devicetrees

Browse source 
Label properties are not required.

Signed-off-by: Kumar Gala <galak@kernel.org>
This commit is contained in:
Kumar Gala 2022-07-27 07:19:25 -05:00 committed by Carles Cufí
parent bdf3fe9366
commit 900974362d
34 changed files with 0 additions and 545 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
dts/arm/acsip/s76s.dtsi
View file

@ -18,7 +18,6 @@
lora: lora@0 {
compatible = "semtech,sx1276";
reg = <0>;
label = "sx1276";
/* SX1276 nRESET */
reset-gpios = <&gpiob 10 GPIO_ACTIVE_LOW>;
dio-gpios =

1
dts/arm/aspeed/ast10x0.dtsi
View file

@ -34,7 +34,6 @@
reg = <0x7e784000 0x1000>;
interrupts = <8 0>;
status = "disabled";
label = "UART_5";
reg-shift = <2>;
};
};

2
dts/arm/broadcom/valkyrie.dtsi
View file

@ -37,7 +37,6 @@
reg = <0x40020000 0x400>;
clock-frequency = <25000000>;
interrupts = <MCU_AON_UART_INTR 3>;
label = "UART_0";
reg-shift = <2>;
status = "disabled";
};
@ -47,7 +46,6 @@
reg = <0x48100000 0x400>;
clock-frequency = <100000000>;
interrupts = <UART0_INTR 3>;
label = "UART_1";
reg-shift = <2>;
status = "disabled";
};

5
dts/arm/broadcom/viper-common.dtsi
View file

@ -15,7 +15,6 @@
compatible = "ns16550";
reg = <0x40020000 0x400>;
clock-frequency = <25000000>;
label = "CRMU_UART";
reg-shift = <2>;
status = "disabled";
};
@ -24,7 +23,6 @@
compatible = "ns16550";
reg = <0x48100000 0x400>;
clock-frequency = <100000000>;
label = "CCG_UART0";
reg-shift = <2>;
status = "disabled";
};
@ -38,7 +36,6 @@
microcode = <0x63b00000 0x1000>;
dma-channels = <8>;
#dma-cells = <1>;
label = "DMA_0";
};
};
@ -53,14 +50,12 @@
<0x4 0x0 0x0 0x8000000>;
reg-names = "iproc_pcie_regs", "map_lowmem",
"map_highmem";
label = "PCIE_0";
dmas = <&pl330 0>, <&pl330 1>;
dma-names = "txdma", "rxdma";
};
paxdma: paxdma@4e100800 {
compatible = "brcm,iproc-pax-dma-v2";
label = "DMA_1";
reg = <0x0 0x4e100800 0x0 0x2100>,
<0x0 0x4f000000 0x0 0x200000>,
<0x0 0x4f200000 0x0 0x10000>;

37
dts/arm/cypress/psoc6.dtsi
View file

@ -34,18 +34,15 @@
#address-cells = <1>;
#size-cells = <1>;
label="CYPRESS_FLASH_DRV_NAME";
flash0: flash@10000000 {
compatible = "soc-nv-flash";
label = "FLASH_0";
reg = <0x10000000 DT_SIZE_K(384)>;
write-block-size = <4>;
};
flash1: flash@10060000 {
compatible = "soc-nv-flash";
label = "FLASH_1";
reg = <0x10060000 DT_SIZE_K(640)>;
write-block-size = <4>;
};
@ -79,7 +76,6 @@
compatible = "cypress,psoc6-hsiom";
reg = <0x40310000 0x2024>;
interrupts = <15 1>, <16 1>;
label = "HSIOM";
status = "disabled";
};
@ -87,7 +83,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320000 0x80>;
interrupts = <0 1>;
label = "P0";
gpio-controller;
ngpios = <6>;
#gpio-cells = <2>;
@ -98,7 +93,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320080 0x80>;
interrupts = <1 1>;
label = "P1";
gpio-controller;
ngpios = <6>;
#gpio-cells = <2>;
@ -109,7 +103,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320100 0x80>;
interrupts = <2 1>;
label = "P2";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -120,7 +113,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320180 0x80>;
interrupts = <3 1>;
label = "P3";
gpio-controller;
ngpios = <6>;
#gpio-cells = <2>;
@ -131,7 +123,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320200 0x80>;
interrupts = <4 1>;
label = "P4";
gpio-controller;
ngpios = <4>;
#gpio-cells = <2>;
@ -142,7 +133,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320280 0x80>;
interrupts = <5 1>;
label = "P5";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -153,7 +143,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320300 0x80>;
interrupts = <6 1>;
label = "P6";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -164,7 +153,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320380 0x80>;
interrupts = <7 1>;
label = "P7";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -175,7 +163,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320400 0x80>;
interrupts = <8 1>;
label = "P8";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -186,7 +173,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320480 0x80>;
interrupts = <9 1>;
label = "P9";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -197,7 +183,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320500 0x80>;
interrupts = <10 1>;
label = "P10";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -208,7 +193,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320580 0x80>;
interrupts = <11 1>;
label = "P11";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -219,7 +203,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320600 0x80>;
interrupts = <12 1>;
label = "P12";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -230,7 +213,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320680 0x80>;
interrupts = <13 1>;
label = "P13";
gpio-controller;
ngpios = <8>;
#gpio-cells = <2>;
@ -241,7 +223,6 @@
compatible = "cypress,psoc6-gpio";
reg = <0x40320700 0x80>;
interrupts = <14 1>;
label = "P14";
gpio-controller;
ngpios = <2>;
#gpio-cells = <2>;
@ -256,7 +237,6 @@
interrupts = <41 6>;
peripheral-id = <0>;
status = "disabled";
label = "spi_0";
#address-cells = <1>;
#size-cells = <0>;
};
@ -266,7 +246,6 @@
interrupts = <42 6>;
peripheral-id = <1>;
status = "disabled";
label = "spi_1";
#address-cells = <1>;
#size-cells = <0>;
};
@ -276,7 +255,6 @@
interrupts = <43 6>;
peripheral-id = <2>;
status = "disabled";
label = "spi_2";
#address-cells = <1>;
#size-cells = <0>;
};
@ -286,7 +264,6 @@
interrupts = <44 6>;
peripheral-id = <3>;
status = "disabled";
label = "spi_3";
#address-cells = <1>;
#size-cells = <0>;
};
@ -296,7 +273,6 @@
interrupts = <45 6>;
peripheral-id = <4>;
status = "disabled";
label = "spi_4";
#address-cells = <1>;
#size-cells = <0>;
};
@ -306,7 +282,6 @@
interrupts = <46 6>;
peripheral-id = <5>;
status = "disabled";
label = "spi_5";
#address-cells = <1>;
#size-cells = <0>;
};
@ -316,7 +291,6 @@
interrupts = <47 6>;
peripheral-id = <6>;
status = "disabled";
label = "spi_6";
#address-cells = <1>;
#size-cells = <0>;
};
@ -326,7 +300,6 @@
interrupts = <48 6>;
peripheral-id = <7>;
status = "disabled";
label = "spi_7";
#address-cells = <1>;
#size-cells = <0>;
};
@ -336,7 +309,6 @@
interrupts = <18 6>;
peripheral-id = <8>;
status = "disabled";
label = "spi_8";
#address-cells = <1>;
#size-cells = <0>;
};
@ -347,7 +319,6 @@
interrupts = <41 6>;
peripheral-id = <0>;
status = "disabled";
label = "uart_0";
};
uart1: uart@40620000 {
compatible = "cypress,psoc6-uart";
@ -355,7 +326,6 @@
interrupts = <42 6>;
peripheral-id = <1>;
status = "disabled";
label = "uart_1";
};
uart2: uart@40630000 {
compatible = "cypress,psoc6-uart";
@ -363,7 +333,6 @@
interrupts = <43 6>;
peripheral-id = <2>;
status = "disabled";
label = "uart_2";
};
uart3: uart@40640000 {
compatible = "cypress,psoc6-uart";
@ -371,7 +340,6 @@
interrupts = <44 6>;
peripheral-id = <3>;
status = "disabled";
label = "uart_3";
};
uart4: uart@40650000 {
compatible = "cypress,psoc6-uart";
@ -379,7 +347,6 @@
interrupts = <45 6>;
peripheral-id = <4>;
status = "disabled";
label = "uart_4";
};
uart5: uart@40660000 {
compatible = "cypress,psoc6-uart";
@ -387,7 +354,6 @@
interrupts = <46 6>;
peripheral-id = <5>;
status = "disabled";
label = "uart_5";
};
uart6: uart@40670000 {
compatible = "cypress,psoc6-uart";
@ -395,7 +361,6 @@
interrupts = <47 6>;
peripheral-id = <6>;
status = "disabled";
label = "uart_6";
};
uart7: uart@40680000 {
compatible = "cypress,psoc6-uart";
@ -403,7 +368,6 @@
interrupts = <48 6>;
peripheral-id = <7>;
status = "disabled";
label = "uart_7";
};
uart8: uart@40690000 {
compatible = "cypress,psoc6-uart";
@ -411,7 +375,6 @@
interrupts = <18 6>;
peripheral-id = <8>;
status = "disabled";
label = "uart_8";
};
uid: device_uid@16000600 {

33
dts/arm/cypress/psoc6_cm0.dtsi
View file

@ -22,7 +22,6 @@
compatible = "cypress,psoc6-intmux";
reg = <0x40210020 0x20>;
ranges = <0x0 0x40210020 0x20>;
label = "INTMUX";
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
@ -33,7 +32,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <0 3>;
label = "INTMUX_CH0";
status = "okay";
};
intmux_ch1: interrupt-controller@1 {
@ -42,7 +40,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <1 3>;
label = "INTMUX_CH1";
status = "okay";
};
intmux_ch2: interrupt-controller@2 {
@ -51,7 +48,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <2 3>;
label = "INTMUX_CH2";
status = "okay";
};
intmux_ch3: interrupt-controller@3 {
@ -60,7 +56,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <3 3>;
label = "INTMUX_CH3";
status = "okay";
};
intmux_ch4: interrupt-controller@4 {
@ -69,7 +64,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <4 3>;
label = "INTMUX_CH4";
status = "okay";
};
intmux_ch5: interrupt-controller@5 {
@ -78,7 +72,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <5 3>;
label = "INTMUX_CH5";
status = "okay";
};
intmux_ch6: interrupt-controller@6 {
@ -87,7 +80,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <6 3>;
label = "INTMUX_CH6";
status = "okay";
};
intmux_ch7: interrupt-controller@7 {
@ -96,7 +88,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <7 3>;
label = "INTMUX_CH7";
status = "okay";
};
intmux_ch8: interrupt-controller@8 {
@ -105,7 +96,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <8 3>;
label = "INTMUX_CH8";
status = "okay";
};
intmux_ch9: interrupt-controller@9 {
@ -114,7 +104,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <9 3>;
label = "INTMUX_CH9";
status = "okay";
};
intmux_ch10: interrupt-controller@a {
@ -123,7 +112,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <10 3>;
label = "INTMUX_CH10";
status = "okay";
};
intmux_ch11: interrupt-controller@b {
@ -132,7 +120,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <11 3>;
label = "INTMUX_CH11";
status = "okay";
};
intmux_ch12: interrupt-controller@c {
@ -141,7 +128,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <12 3>;
label = "INTMUX_CH12";
status = "okay";
};
intmux_ch13: interrupt-controller@d {
@ -150,7 +136,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <13 3>;
label = "INTMUX_CH13";
status = "okay";
};
intmux_ch14: interrupt-controller@e {
@ -159,7 +144,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <14 3>;
label = "INTMUX_CH14";
status = "okay";
};
intmux_ch15: interrupt-controller@f {
@ -168,7 +152,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <15 3>;
label = "INTMUX_CH15";
status = "okay";
};
intmux_ch16: interrupt-controller@10 {
@ -177,7 +160,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <16 3>;
label = "INTMUX_CH16";
status = "okay";
};
intmux_ch17: interrupt-controller@11 {
@ -186,7 +168,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <17 3>;
label = "INTMUX_CH17";
status = "okay";
};
intmux_ch18: interrupt-controller@12 {
@ -195,7 +176,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <18 3>;
label = "INTMUX_CH18";
status = "okay";
};
intmux_ch19: interrupt-controller@13 {
@ -204,7 +184,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <19 3>;
label = "INTMUX_CH19";
status = "okay";
};
intmux_ch20: interrupt-controller@14 {
@ -213,7 +192,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <20 3>;
label = "INTMUX_CH20";
status = "okay";
};
intmux_ch21: interrupt-controller@15 {
@ -222,7 +200,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <21 3>;
label = "INTMUX_CH21";
status = "okay";
};
intmux_ch22: interrupt-controller@16 {
@ -231,7 +208,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <22 3>;
label = "INTMUX_CH22";
status = "okay";
};
intmux_ch23: interrupt-controller@17 {
@ -240,7 +216,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <23 3>;
label = "INTMUX_CH23";
status = "okay";
};
intmux_ch24: interrupt-controller@18 {
@ -249,7 +224,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <24 3>;
label = "INTMUX_CH24";
status = "okay";
};
intmux_ch25: interrupt-controller@19 {
@ -258,7 +232,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <25 3>;
label = "INTMUX_CH25";
status = "okay";
};
intmux_ch26: interrupt-controller@1a {
@ -267,7 +240,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <26 3>;
label = "INTMUX_CH26";
status = "okay";
};
intmux_ch27: interrupt-controller@1b {
@ -276,7 +248,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <27 3>;
label = "INTMUX_CH27";
status = "okay";
};
intmux_ch28: interrupt-controller@1c {
@ -285,7 +256,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <28 3>;
label = "INTMUX_CH28";
status = "okay";
};
intmux_ch29: interrupt-controller@1d {
@ -294,7 +264,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <29 3>;
label = "INTMUX_CH29";
status = "okay";
};
intmux_ch30: interrupt-controller@1e {
@ -303,7 +272,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <30 3>;
label = "INTMUX_CH30";
status = "okay";
};
intmux_ch31: interrupt-controller@1f {
@ -312,7 +280,6 @@
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <31 3>;
label = "INTMUX_CH31";
status = "okay";
};
};

44
dts/arm/gigadevice/gd32e10x/gd32e10x.dtsi
View file

@ -31,7 +31,6 @@
FMC: flash-controller@40022000 {
compatible = "gd,gd32-flash-controller";
label = "FLASH_CTRL";
reg = <0x40022000 0x400>;
peripheral-id = <6>;
@ -40,7 +39,6 @@
flash0: flash@8000000 {
compatible = "soc-nv-flash";
label = "FLASH_0";
};
};
@ -50,7 +48,6 @@
interrupts = <37 0>;
rcu-periph-clock = <0x60e>;
status = "disabled";
label = "USART_0";
};
usart1: usart@40004400 {
@ -59,7 +56,6 @@
interrupts = <38 0>;
rcu-periph-clock = <0x711>;
status = "disabled";
label = "USART_1";
};
usart2: usart@40004800 {
@ -68,7 +64,6 @@
interrupts = <39 0>;
rcu-periph-clock = <0x712>;
status = "disabled";
label = "USART_2";
};
uart3: usart@40004c00 {
@ -77,7 +72,6 @@
interrupts = <52 0>;
rcu-periph-clock = <0x713>;
status = "disabled";
label = "USART_3";
};
uart4: usart@40005000 {
@ -86,7 +80,6 @@
interrupts = <53 0>;
rcu-periph-clock = <0x714>;
status = "disabled";
label = "USART_4";
};
dac: dac@40007400 {
@ -94,7 +87,6 @@
reg = <0x40007400 0x400>;
rcu-periph-clock = <0x71d>;
num-channels = <2>;
label = "DAC";
status = "disabled";
#io-channel-cells = <1>;
};
@ -109,7 +101,6 @@
interrupt-names = "event", "error";
rcu-periph-clock = <0x715>;
status = "disabled";
label = "I2C_0";
};
i2c1: i2c@40005800 {
@ -122,7 +113,6 @@
interrupt-names = "event", "error";
rcu-periph-clock = <0x716>;
status = "disabled";
label = "I2C_1";
};
afio: afio@40010000 {
@ -130,7 +120,6 @@
reg = <0x40010000 0x400>;
rcu-periph-clock = <0x600>;
status = "okay";
label = "AFIO";
};
exti: interrupt-controller@40010400 {
@ -144,7 +133,6 @@
interrupt-names = "line0", "line1", "line2", "line3",
"line4", "line5-9", "line10-15";
status = "okay";
label = "EXTI";
};
pinctrl: pin-controller@40010800 {
@ -153,7 +141,6 @@
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
label = "PINCTRL";
gpioa: gpio@40010800 {
compatible = "gd,gd32-gpio";
@ -162,7 +149,6 @@
reg = <0x40010800 0x400>;
rcu-periph-clock = <0x602>;
status = "disabled";
label = "GPIOA";
};
gpiob: gpio@40010c00 {
@ -172,7 +158,6 @@
reg = <0x40010c00 0x400>;
rcu-periph-clock = <0x603>;
status = "disabled";
label = "GPIOB";
};
gpioc: gpio@40011000 {
@ -182,7 +167,6 @@
reg = <0x40011000 0x400>;
rcu-periph-clock = <0x604>;
status = "disabled";
label = "GPIOC";
};
gpiod: gpio@40011400 {
@ -192,7 +176,6 @@
reg = <0x40011400 0x400>;
rcu-periph-clock = <0x605>;
status = "disabled";
label = "GPIOD";
};
gpioe: gpio@40011800 {
@ -202,7 +185,6 @@
reg = <0x40011800 0x400>;
rcu-periph-clock = <0x606>;
status = "disabled";
label = "GPIOE";
};
};
@ -216,12 +198,10 @@
is-advanced;
channels = <4>;
status = "disabled";
label = "TIMER_0";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_0";
#pwm-cells = <3>;
};
};
@ -235,12 +215,10 @@
rcu-periph-reset = <0x400>;
channels = <4>;
status = "disabled";
label = "TIMER_1";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_1";
#pwm-cells = <3>;
};
};
@ -254,12 +232,10 @@
rcu-periph-reset = <0x401>;
channels = <4>;
status = "disabled";
label = "TIMER_2";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_2";
#pwm-cells = <3>;
};
};
@ -273,12 +249,10 @@
rcu-periph-reset = <0x402>;
channels = <4>;
status = "disabled";
label = "TIMER_3";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_3";
#pwm-cells = <3>;
};
};
@ -292,12 +266,10 @@
rcu-periph-reset = <0x403>;
channels = <4>;
status = "disabled";
label = "TIMER_4";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_4";
#pwm-cells = <3>;
};
};
@ -311,7 +283,6 @@
rcu-periph-reset = <0x404>;
channels = <0>;
status = "disabled";
label = "TIMER_5";
};
timer6: timer@40001400 {
@ -323,7 +294,6 @@
rcu-periph-reset = <0x405>;
channels = <0>;
status = "disabled";
label = "TIMER_6";
};
timer7: timer@40013400 {
@ -336,12 +306,10 @@
is-advanced;
channels = <4>;
status = "disabled";
label = "TIMER_7";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_7";
#pwm-cells = <3>;
};
};
@ -355,12 +323,10 @@
rcu-periph-reset = <0x313>;
channels = <2>;
status = "disabled";
label = "TIMER_8";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_8";
#pwm-cells = <3>;
};
};
@ -374,12 +340,10 @@
rcu-periph-reset = <0x314>;
channels = <1>;
status = "disabled";
label = "TIMER_9";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_9";
#pwm-cells = <3>;
};
};
@ -393,12 +357,10 @@
rcu-periph-reset = <0x315>;
channels = <1>;
status = "disabled";
label = "TIMER_10";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_10";
#pwm-cells = <3>;
};
};
@ -412,12 +374,10 @@
rcu-periph-reset = <0x406>;
channels = <2>;
status = "disabled";
label = "TIMER_11";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_11";
#pwm-cells = <3>;
};
};
@ -431,12 +391,10 @@
rcu-periph-reset = <0x402>;
channels = <1>;
status = "disabled";
label = "TIMER_12";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_12";
#pwm-cells = <3>;
};
};
@ -450,12 +408,10 @@
rcu-periph-reset = <0x408>;
channels = <1>;
status = "disabled";
label = "TIMER_13";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_13";
#pwm-cells = <3>;
};
};

1
dts/arm/gigadevice/gd32f3x0/gd32f350.dtsi
View file

@ -14,7 +14,6 @@
reg = <0x40007400 0x400>;
rcu-periph-clock = <0x71d>;
num-channels = <1>;
label = "DAC";
status = "disabled";
#io-channel-cells = <1>;
};

11
dts/arm/gigadevice/gd32f3x0/gd32f3x0.dtsi
View file

@ -28,7 +28,6 @@
fmc: flash-controller@40022000 {
compatible = "gd,gd32-flash-controller";
label = "FMC";
reg = <0x40022000 0x400>;
#address-cells = <1>;
@ -36,7 +35,6 @@
flash0: flash@8000000 {
compatible = "soc-nv-flash";
label = "FLASH_0";
};
};
@ -46,7 +44,6 @@
interrupts = <27 0>;
rcu-periph-clock = <0x060e>;
status = "disabled";
label = "USART_0";
};
usart1: usart@40004400 {
@ -55,7 +52,6 @@
interrupts = <28 0>;
rcu-periph-clock = <0x0711>;
status = "disabled";
label = "USART_1";
};
adc0: adc@40012400 {
@ -66,7 +62,6 @@
rcu-clock-source = <GD32_RCU_ADCCK_APB2_DIV4>;
channels = <16>;
status = "disabled";
label = "ADC_0";
#io-channel-cells = <1>;
};
@ -76,7 +71,6 @@
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
label = "PINCTRL";
gpioa: gpio@48000000 {
compatible = "gd,gd32-gpio";
@ -85,7 +79,6 @@
reg = <0x48000000 0x400>;
rcu-periph-clock = <0x511>;
status = "disabled";
label = "GPIOA";
};
gpiob: gpio@48000400 {
@ -95,7 +88,6 @@
reg = <0x48000400 0x400>;
rcu-periph-clock = <0x512>;
status = "disabled";
label = "GPIOB";
};
gpioc: gpio@48000800 {
@ -105,7 +97,6 @@
reg = <0x48000800 0x400>;
rcu-periph-clock = <0x513>;
status = "disabled";
label = "GPIOC";
};
gpiod: gpio@48000c00 {
@ -115,7 +106,6 @@
reg = <0x48000c00 0x400>;
rcu-periph-clock = <0x514>;
status = "disabled";
label = "GPIOD";
};
gpiof: gpio@48001400 {
@ -125,7 +115,6 @@
reg = <0x48001400 0x400>;
rcu-periph-clock = <0x516>;
status = "disabled";
label = "GPIOF";
};
};
};

45
dts/arm/gigadevice/gd32f403/gd32f403.dtsi
View file

@ -37,7 +37,6 @@
fmc: flash-controller@40022000 {
compatible = "gd,gd32-flash-controller";
label = "FLASH_CTRL";
reg = <0x40022000 0x400>;
peripheral-id = <6>;
@ -46,7 +45,6 @@
flash0: flash@8000000 {
compatible = "soc-nv-flash";
label = "FLASH_0";
};
};
@ -56,7 +54,6 @@
interrupts = <37 0>;
rcu-periph-clock = <0x60e>;
status = "disabled";
label = "USART_0";
};
usart1: usart@40004400 {
@ -65,7 +62,6 @@
interrupts = <38 0>;
rcu-periph-clock = <0x712>;
status = "disabled";
label = "USART_1";
};
usart2: usart@40004800 {
@ -74,7 +70,6 @@
interrupts = <39 0>;
rcu-periph-clock = <0x713>;
status = "disabled";
label = "USART_2";
};
uart3: usart@40004c00 {
@ -83,7 +78,6 @@
interrupts = <52 0>;
rcu-periph-clock = <0x714>;
status = "disabled";
label = "USART_3";
};
uart4: usart@40005000 {
@ -92,7 +86,6 @@
interrupts = <53 0>;
rcu-periph-clock = <0x715>;
status = "disabled";
label = "USART_4";
};
spi0: spi@40013000 {
@ -101,7 +94,6 @@
interrupts = <35 0>;
rcu-periph-clock = <0x60c>;
status = "disabled";
label = "SPI_0";
#address-cells = <1>;
#size-cells = <0>;
};
@ -112,7 +104,6 @@
interrupts = <36 0>;
rcu-periph-clock = <0x70e>;
status = "disabled";
label = "SPI_1";
#address-cells = <1>;
#size-cells = <0>;
};
@ -123,7 +114,6 @@
interrupts = <51 0>;
rcu-periph-clock = <0x70f>;
status = "disabled";
label = "SPI_2";
#address-cells = <1>;
#size-cells = <0>;
};
@ -135,7 +125,6 @@
rcu-periph-clock = <0x609>;
channels = <16>;
status = "disabled";
label = "ADC_0";
#io-channel-cells = <1>;
};
@ -146,7 +135,6 @@
rcu-periph-clock = <0x60A>;
channels = <16>;
status = "disabled";
label = "ADC_1";
#io-channel-cells = <1>;
};
@ -157,7 +145,6 @@
rcu-periph-clock = <0x60F>;
channels = <16>;
status = "disabled";
label = "ADC_2";
#io-channel-cells = <1>;
};
@ -173,7 +160,6 @@
"line3", "line4", "line5-9",
"line10-15";
status = "okay";
label = "EXTI";
};
afio: afio@40010000 {
@ -181,7 +167,6 @@
reg = <0x40010000 0x400>;
rcu-periph-clock = <0x600>;
status = "okay";
label = "AFIO";
};
pinctrl: pin-controller@40010800 {
@ -190,7 +175,6 @@
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
label = "PINCTRL";
gpioa: gpio@40010800 {
compatible = "gd,gd32-gpio";
@ -199,7 +183,6 @@
reg = <0x40010800 0x400>;
rcu-periph-clock = <0x602>;
status = "disabled";
label = "GPIOA";
};
gpiob: gpio@40010c00 {
@ -209,7 +192,6 @@
reg = <0x40010c00 0x400>;
rcu-periph-clock = <0x603>;
status = "disabled";
label = "GPIOB";
};
gpioc: gpio@40011000 {
@ -219,7 +201,6 @@
reg = <0x40011000 0x400>;
rcu-periph-clock = <0x604>;
status = "disabled";
label = "GPIOC";
};
gpiod: gpio@40011400 {
@ -229,7 +210,6 @@
reg = <0x40011400 0x400>;
rcu-periph-clock = <0x605>;
status = "disabled";
label = "GPIOD";
};
gpioe: gpio@40011800 {
@ -239,7 +219,6 @@
reg = <0x40011800 0x400>;
rcu-periph-clock = <0x606>;
status = "disabled";
label = "GPIOE";
};
gpiof: gpio@40011c00 {
@ -249,7 +228,6 @@
reg = <0x40011c00 0x400>;
rcu-periph-clock = <0x607>;
status = "disabled";
label = "GPIOF";
};
gpiog: gpio@40012000 {
@ -259,7 +237,6 @@
reg = <0x40012000 0x400>;
rcu-periph-clock = <0x608>;
status = "disabled";
label = "GPIOG";
};
};
@ -273,12 +250,10 @@
is-advanced;
channels = <4>;
status = "disabled";
label = "TIMER_0";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_0";
#pwm-cells = <3>;
};
};
@ -292,12 +267,10 @@
rcu-periph-reset = <0x401>;
channels = <4>;
status = "disabled";
label = "TIMER_2";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_2";
#pwm-cells = <3>;
};
};
@ -311,12 +284,10 @@
rcu-periph-reset = <0x402>;
channels = <4>;
status = "disabled";
label = "TIMER_3";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_3";
#pwm-cells = <3>;
};
};
@ -330,7 +301,6 @@
rcu-periph-reset = <0x404>;
channels = <0>;
status = "disabled";
label = "TIMER_5";
};
timer6: timer@40001400 {
@ -342,7 +312,6 @@
rcu-periph-reset = <0x405>;
channels = <0>;
status = "disabled";
label = "TIMER_6";
};
timer7: timer@40013400 {
@ -355,12 +324,10 @@
is-advanced;
channels = <4>;
status = "disabled";
label = "TIMER_7";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_7";
#pwm-cells = <3>;
};
};
@ -374,12 +341,10 @@
rcu-periph-reset = <0x313>;
channels = <2>;
status = "disabled";
label = "TIMER_8";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_8";
#pwm-cells = <3>;
};
};
@ -393,12 +358,10 @@
rcu-periph-reset = <0x314>;
channels = <1>;
status = "disabled";
label = "TIMER_9";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_9";
#pwm-cells = <3>;
};
};
@ -412,12 +375,10 @@
rcu-periph-reset = <0x315>;
channels = <1>;
status = "disabled";
label = "TIMER_10";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_10";
#pwm-cells = <3>;
};
};
@ -431,12 +392,10 @@
rcu-periph-reset = <0x406>;
channels = <2>;
status = "disabled";
label = "TIMER_11";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_11";
#pwm-cells = <3>;
};
};
@ -450,12 +409,10 @@
rcu-periph-reset = <0x402>;
channels = <1>;
status = "disabled";
label = "TIMER_12";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_12";
#pwm-cells = <3>;
};
};
@ -469,12 +426,10 @@
rcu-periph-reset = <0x408>;
channels = <1>;
status = "disabled";
label = "TIMER_13";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_13";
#pwm-cells = <3>;
};
};

3
dts/arm/gigadevice/gd32f4xx/gd32f450.dtsi
View file

@ -14,7 +14,6 @@
interrupts = <84 0>;
rcu-periph-clock = <0x110d>;
status = "disabled";
label = "SPI_3";
#address-cells = <1>;
#size-cells = <0>;
};
@ -25,7 +24,6 @@
interrupts = <85 0>;
rcu-periph-clock = <0x1114>;
status = "disabled";
label = "SPI_4";
#address-cells = <1>;
#size-cells = <0>;
};
@ -36,7 +34,6 @@
interrupts = <86 0>;
rcu-periph-clock = <0x1115>;
status = "disabled";
label = "SPI_5";
#address-cells = <1>;
#size-cells = <0>;
};

58
dts/arm/gigadevice/gd32f4xx/gd32f4xx.dtsi
View file

@ -38,7 +38,6 @@
fmc: flash-controller@40023c00 {
compatible = "gd,gd32-flash-controller";
label = "FMC";
reg = <0x40023c00 0x400>;
#address-cells = <1>;
@ -46,7 +45,6 @@
flash0: flash@8000000 {
compatible = "soc-nv-flash";
label = "FLASH0";
};
};
@ -56,7 +54,6 @@
interrupts = <37 0>;
rcu-periph-clock = <0x1104>;
status = "disabled";
label = "USART_0";
};
usart1: usart@40004400 {
@ -65,7 +62,6 @@
interrupts = <38 0>;
rcu-periph-clock = <0x1011>;
status = "disabled";
label = "USART_1";
};
usart2: usart@40004800 {
@ -74,7 +70,6 @@
interrupts = <39 0>;
rcu-periph-clock = <0x1012>;
status = "disabled";
label = "USART_2";
};
uart3: usart@40004c00 {
@ -83,7 +78,6 @@
interrupts = <52 0>;
rcu-periph-clock = <0x1013>;
status = "disabled";
label = "USART_3";
};
uart4: usart@40005000 {
@ -92,7 +86,6 @@
interrupts = <52 0>;
rcu-periph-clock = <0x1014>;
status = "disabled";
label = "USART_4";
};
usart5: usart@40011400 {
@ -101,7 +94,6 @@
interrupts = <71 0>;
rcu-periph-clock = <0x1105>;
status = "disabled";
label = "USART_5";
};
uart6: usart@40007800 {
@ -110,7 +102,6 @@
interrupts = <82 0>;
rcu-periph-clock = <0x101e>;
status = "disabled";
label = "USART_6";
};
uart7: usart@40007c00 {
@ -119,7 +110,6 @@
interrupts = <83 0>;
rcu-periph-clock = <0x101f>;
status = "disabled";
label = "USART_7";
};
dac: dac@40007400 {
@ -127,7 +117,6 @@
reg = <0x40007400 0x400>;
rcu-periph-clock = <0x101d>;
num-channels = <2>;
label = "DAC";
status = "disabled";
#io-channel-cells = <1>;
};
@ -142,7 +131,6 @@
interrupt-names = "event", "error";
rcu-periph-clock = <0x1015>;
status = "disabled";
label = "I2C_0";
};
i2c1: i2c@40005800 {
@ -155,7 +143,6 @@
interrupt-names = "event", "error";
rcu-periph-clock = <0x1016>;
status = "disabled";
label = "I2C_1";
};
i2c2: i2c@40005c00 {
@ -168,7 +155,6 @@
interrupt-names = "event", "error";
rcu-periph-clock = <0x1017>;
status = "disabled";
label = "I2C_2";
};
spi0: spi@40013000 {
@ -177,7 +163,6 @@
interrupts = <35 0>;
rcu-periph-clock = <0x110c>;
status = "disabled";
label = "SPI_0";
#address-cells = <1>;
#size-cells = <0>;
};
@ -188,7 +173,6 @@
interrupts = <36 0>;
rcu-periph-clock = <0x100e>;
status = "disabled";
label = "SPI_1";
#address-cells = <1>;
#size-cells = <0>;
};
@ -199,7 +183,6 @@
interrupts = <51 0>;
rcu-periph-clock = <0x100f>;
status = "disabled";
label = "SPI_2";
#address-cells = <1>;
#size-cells = <0>;
};
@ -211,7 +194,6 @@
rcu-periph-clock = <0x1108>;
channels = <16>;
status = "disabled";
label = "ADC_0";
#io-channel-cells = <1>;
};
@ -222,7 +204,6 @@
rcu-periph-clock = <0x1109>;
channels = <16>;
status = "disabled";
label = "ADC_1";
#io-channel-cells = <1>;
};
@ -233,7 +214,6 @@
rcu-periph-clock = <0x110A>;
channels = <16>;
status = "disabled";
label = "ADC_2";
#io-channel-cells = <1>;
};
@ -241,7 +221,6 @@
compatible = "gd,gd32-syscfg";
reg = <0x40013800 0x400>;
rcu-periph-clock = <0x110e>;
label = "SYSCFG";
};
exti: interrupt-controller@40013c00 {
@ -255,7 +234,6 @@
interrupt-names = "line0", "line1", "line2", "line3",
"line4", "line5-9", "line10-15";
status = "okay";
label = "EXTI";
};
pinctrl: pin-controller@40020000 {
@ -264,7 +242,6 @@
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
label = "PINCTRL";
gpioa: gpio@40020000 {
compatible = "gd,gd32-gpio";
@ -273,7 +250,6 @@
reg = <0x40020000 0x400>;
rcu-periph-clock = <0xc00>;
status = "disabled";
label = "GPIOA";
};
gpiob: gpio@40020400 {
@ -283,7 +259,6 @@
reg = <0x40020400 0x400>;
rcu-periph-clock = <0xc01>;
status = "disabled";
label = "GPIOB";
};
gpioc: gpio@40020800 {
@ -293,7 +268,6 @@
reg = <0x40020800 0x400>;
rcu-periph-clock = <0xc02>;
status = "disabled";
label = "GPIOC";
};
gpiod: gpio@40020c00 {
@ -303,7 +277,6 @@
reg = <0x40020c00 0x400>;
rcu-periph-clock = <0xc03>;
status = "disabled";
label = "GPIOD";
};
gpioe: gpio@40021000 {
@ -313,7 +286,6 @@
reg = <0x40021000 0x400>;
rcu-periph-clock = <0xc04>;
status = "disabled";
label = "GPIOE";
};
gpiof: gpio@40021400 {
@ -323,7 +295,6 @@
reg = <0x40021400 0x400>;
rcu-periph-clock = <0xc05>;
status = "disabled";
label = "GPIOF";
};
gpiog: gpio@40021800 {
@ -333,7 +304,6 @@
reg = <0x40021800 0x400>;
rcu-periph-clock = <0xc06>;
status = "disabled";
label = "GPIOG";
};
gpioh: gpio@40021c00 {
@ -343,7 +313,6 @@
reg = <0x40021c00 0x400>;
rcu-periph-clock = <0xc07>;
status = "disabled";
label = "GPIOH";
};
gpioi: gpio@40022000 {
@ -353,7 +322,6 @@
reg = <0x40022000 0x400>;
rcu-periph-clock = <0xc08>;
status = "disabled";
label = "GPIOI";
};
};
@ -367,12 +335,10 @@
is-advanced;
channels = <4>;
status = "disabled";
label = "TIMER_0";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_0";
#pwm-cells = <3>;
};
};
@ -387,12 +353,10 @@
is-32bit;
channels = <4>;
status = "disabled";
label = "TIMER_1";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_1";
#pwm-cells = <3>;
};
};
@ -406,12 +370,10 @@
rcu-periph-reset = <0x801>;
channels = <4>;
status = "disabled";
label = "TIMER_2";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_2";
#pwm-cells = <3>;
};
};
@ -425,12 +387,10 @@
rcu-periph-reset = <0x802>;
channels = <4>;
status = "disabled";
label = "TIMER_3";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_3";
#pwm-cells = <3>;
};
};
@ -445,12 +405,10 @@
is-32bit;
channels = <4>;
status = "disabled";
label = "TIMER_4";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_4";
#pwm-cells = <3>;
};
};
@ -464,7 +422,6 @@
rcu-periph-reset = <0x804>;
channels = <0>;
status = "disabled";
label = "TIMER_5";
};
timer6: timer@40001400 {
@ -476,7 +433,6 @@
rcu-periph-reset = <0x805>;
channels = <0>;
status = "disabled";
label = "TIMER_6";
};
timer7: timer@40010400 {
@ -489,12 +445,10 @@
is-advanced;
channels = <4>;
status = "disabled";
label = "TIMER_7";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_7";
#pwm-cells = <3>;
};
};
@ -508,12 +462,10 @@
rcu-periph-reset = <0x910>;
channels = <2>;
status = "disabled";
label = "TIMER_8";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_8";
#pwm-cells = <3>;
};
};
@ -527,12 +479,10 @@
rcu-periph-reset = <0x911>;
channels = <1>;
status = "disabled";
label = "TIMER_9";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_9";
#pwm-cells = <3>;
};
};
@ -546,12 +496,10 @@
rcu-periph-reset = <0x912>;
channels = <1>;
status = "disabled";
label = "TIMER_10";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_10";
#pwm-cells = <3>;
};
};
@ -565,12 +513,10 @@
rcu-periph-reset = <0x806>;
channels = <2>;
status = "disabled";
label = "TIMER_11";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_11";
#pwm-cells = <3>;
};
};
@ -584,12 +530,10 @@
rcu-periph-reset = <0x802>;
channels = <1>;
status = "disabled";
label = "TIMER_12";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_12";
#pwm-cells = <3>;
};
};
@ -603,12 +547,10 @@
rcu-periph-reset = <0x808>;
channels = <1>;
status = "disabled";
label = "TIMER_13";
pwm {
compatible = "gd,gd32-pwm";
status = "disabled";
label = "PWM_13";
#pwm-cells = <3>;
};
};

18
dts/arm/intel_socfpga_std/socfpga.dtsi
View file

@ -44,7 +44,6 @@
interrupt-controller;
reg = <0xfffed000 0x1000>,
<0xfffec100 0x100>;
label = "intc";
};
soc {
@ -59,7 +58,6 @@
compatible = "arm,pl330-cache";
reg = <0xfffef000 0x1000>;
interrupts = <0 38 0x04 IRQ_DEFAULT_PRIORITY>;
label = "L2";
status= "okay";
};
@ -92,7 +90,6 @@
sysmgr: sysmgr@ffd08000 {
compatible = "altr,sys-mgr", "syscon";
reg = <0xffd08000 0x4000>;
label = "sysmgr";
status = "okay";
};
ocram: sram@ffff0000 {
@ -124,7 +121,6 @@
reg-shift = <2>;
clock-frequency = <100000000>;
dma-names = "tx", "rx";
label = "UART_0";
};
uart1: serial1@ffc03000 {
@ -134,7 +130,6 @@
reg-shift = <2>;
clock-frequency = <100000000>;
dma-names = "tx", "rx";
label = "UART_1";
};
gmac0: ethernet@ff700000 {
@ -144,7 +139,6 @@
interrupts = <0 115 4 IRQ_DEFAULT_PRIORITY>;
local-mac-address = [00 00 00 00 00 00];
status = "disabled";
label = "ETH_0";
};
gmac1: ethernet@ff702000 {
@ -154,7 +148,6 @@
interrupts = <0 120 4 IRQ_DEFAULT_PRIORITY>;
local-mac-address = [00 00 00 00 00 00];
status = "okay";
label = "ETH_1";
};
gpio0: gpio@ff708000 {
@ -164,7 +157,6 @@
reg = <0xff708000 0x1000>;
interrupts = <0 164 4 IRQ_DEFAULT_PRIORITY>;
status = "disabled";
label = "GPIO_0";
ngpios = <29>;
gpio-controller;
#gpio-cells = <2>;
@ -177,7 +169,6 @@
reg = <0xff709000 0x1000>;
interrupts = <0 165 4 IRQ_DEFAULT_PRIORITY>;
status = "disabled";
label = "GPIO_1";
ngpios = <29>;
gpio-controller;
#gpio-cells = <2>;
@ -190,7 +181,6 @@
reg = <0xff70a000 0x1000>;
interrupts = <0 166 4 IRQ_DEFAULT_PRIORITY>;
status = "disabled";
label = "GPIO_2";
ngpios = <27>;
gpio-controller;
#gpio-cells = <2>;
@ -205,7 +195,6 @@
interrupts = <0 158 0x4 IRQ_DEFAULT_PRIORITY>;
interrupt-parent = <&intc>;
status = "okay";
label = "I2C_0";
};
i2c1: i2c@ffc05000 {
@ -215,7 +204,6 @@
reg = <0xffc05000 0x1000>;
interrupts = <0 159 0x4 IRQ_DEFAULT_PRIORITY>;
status = "disabled";
label = "I2C_1";
};
i2c2: i2c@ffc06000 {
@ -225,7 +213,6 @@
reg = <0xffc06000 0x1000>;
interrupts = <0 160 0x4 IRQ_DEFAULT_PRIORITY>;
status = "disabled";
label = "I2C_2";
};
i2c3: i2c@ffc07000 {
@ -235,7 +222,6 @@
reg = <0xffc07000 0x1000>;
interrupts = <0 161 0x4 IRQ_DEFAULT_PRIORITY>;
status = "disabled";
label = "I2C_3";
};
usb0: usb@ffb30000 {
@ -244,7 +230,6 @@
interrupts = <0 127 4 IRQ_DEFAULT_PRIORITY>;
interrupt-parent = <&intc>;
num-bidir-endpoints = <16>;
label = "USB_0";
status = "disabled";
};
@ -254,7 +239,6 @@
interrupts = <0 128 4 IRQ_DEFAULT_PRIORITY>;
interrupt-parent = <&intc>;
num-bidir-endpoints = <16>;
label = "USB_1";
status = "okay";
};
@ -265,7 +249,6 @@
reg = <0xfff00000 0x1000>;
interrupts = <0 154 4 IRQ_DEFAULT_PRIORITY>;
clock-frequency = <200000000>;
label = "SPI_0";
status = "okay";
};
@ -276,7 +259,6 @@
reg = <0xfff01000 0x1000>;
interrupts = <0 155 4 IRQ_DEFAULT_PRIORITY>;
clock-frequency = <200000000>;
label = "SPI_1";
status = "disabled";
};
};

44
dts/arm/microchip/mec1501hsz.dtsi
View file

@ -70,11 +70,9 @@
pcr: pcr@40080100 {
reg = <0x40080100 0x100 0x4000a400 0x100>;
reg-names = "pcrr", "vbatr";
label = "PCR";
};
ecia: ecia@4000e000 {
reg = <0x4000e000 0x400>;
label = "ECIA_0";
#address-cells = <1>;
#size-cells = <1>;
};
@ -82,14 +80,12 @@
compatible = "microchip,xec-rtos-timer";
reg = <0x40007400 0x10>;
interrupts = <111 0>;
label = "RTIMER";
girqs = <23 10>;
};
bbram: bb-ram@4000a800 {
compatible = "microchip,xec-bbram";
reg = <0x4000a800 0x80>;
reg-names = "memory";
label = "BBRAM";
};
wdog: watchdog@40000400 {
compatible = "microchip,xec-watchdog";
@ -97,7 +93,6 @@
interrupts = <171 0>;
girqs = <21 2>;
pcrs = <1 9>;
label = "WDT_0";
};
uart0: uart@400f2400 {
compatible = "ns16550";
@ -105,7 +100,6 @@
interrupts = <40 0>;
clock-frequency = <1843200>;
current-speed = <38400>;
label = "UART_0";
reg-shift = <0>;
status = "disabled";
};
@ -115,7 +109,6 @@
interrupts = <41 0>;
clock-frequency = <1843200>;
current-speed = <38400>;
label = "UART_1";
reg-shift = <0>;
status = "disabled";
};
@ -125,7 +118,6 @@
interrupts = <44 0>;
clock-frequency = <1843200>;
current-speed = <38400>;
label = "UART_2";
reg-shift = <0>;
status = "disabled";
};
@ -134,7 +126,6 @@
reg = <0x40081000 0x80>;
interrupts = <3 2>;
gpio-controller;
label="GPIO000_036";
#gpio-cells=<2>;
};
gpio_040_076: gpio@40081080 {
@ -142,7 +133,6 @@
reg = <0x40081080 0x80>;
interrupts = <2 2>;
gpio-controller;
label="GPIO040_076";
#gpio-cells=<2>;
};
gpio_100_136: gpio@40081100 {
@ -150,7 +140,6 @@
reg = <0x40081100 0x80>;
gpio-controller;
interrupts = <1 2>;
label="GPIO100_136";
#gpio-cells=<2>;
};
gpio_140_176: gpio@40081180 {
@ -158,7 +147,6 @@
reg = <0x40081180 0x80>;
gpio-controller;
interrupts = <0 2>;
label="GPIO140_176";
#gpio-cells=<2>;
};
gpio_200_236: gpio@40081200 {
@ -166,7 +154,6 @@
reg = <0x40081200 0x80>;
gpio-controller;
interrupts = <4 2>;
label="GPIO200_236";
#gpio-cells=<2>;
};
gpio_240_276: gpio@40081280 {
@ -174,7 +161,6 @@
reg = <0x40081280 0x80>;
gpio-controller;
interrupts = <17 2>;
label="GPIO240_276";
#gpio-cells=<2>;
};
@ -183,7 +169,6 @@
reg = <0x40004000 0x80>;
clock-frequency = <I2C_BITRATE_STANDARD>;
interrupts = <20 1>;
label = "I2C_SMB_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -196,7 +181,6 @@
reg = <0x40004400 0x80>;
clock-frequency = <I2C_BITRATE_STANDARD>;
interrupts = <21 1>;
label = "I2C_SMB_1";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -209,7 +193,6 @@
reg = <0x40004800 0x80>;
clock-frequency = <I2C_BITRATE_STANDARD>;
interrupts = <22 1>;
label = "I2C_SMB_2";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -222,7 +205,6 @@
reg = <0x40004C00 0x80>;
clock-frequency = <I2C_BITRATE_STANDARD>;
interrupts = <23 1>;
label = "I2C_SMB_3";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -235,7 +217,6 @@
reg = <0x40005000 0x80>;
clock-frequency = <I2C_BITRATE_STANDARD>;
interrupts = <158 1>;
label = "I2C_SMB_4";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -247,7 +228,6 @@
compatible = "microchip,xec-espi";
reg = <0x400f3400 0x400>;
interrupts = <11 3>, <15 3>, <7 3>, <16 3>;
label = "ESPI_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -257,7 +237,6 @@
reg = < 0x40008000 0x400
0x40070000 0x400
0x40071000 0x400>;
label = "ESPI_SAF_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -268,7 +247,6 @@
clock-frequency = <48000000>;
reg = <0x40000c00 0x20>;
interrupts = <136 0>;
label = "TIMER_0";
max-value = <0xFFFF>;
prescaler = <0>;
status = "disabled";
@ -280,7 +258,6 @@
clock-frequency = <48000000>;
reg = <0x40000c20 0x20>;
interrupts = <137 0>;
label = "TIMER_1";
max-value = <0xFFFF>;
prescaler = <0>;
status = "disabled";
@ -298,7 +275,6 @@
clock-frequency = <48000000>;
reg = <0x40000c80 0x20>;
interrupts = <140 0>;
label = "TIMER_4";
max-value = <0xFFFFFFFF>;
prescaler = <0>;
girqs = <23 4>;
@ -310,7 +286,6 @@
clock-frequency = <48000000>;
reg = <0x40000ca0 0x20>;
interrupts = <141 0>;
label = "TIMER_5";
max-value = <0xFFFFFFFF>;
prescaler = <0>;
girqs = <23 5>;
@ -322,7 +297,6 @@
interrupts = <100 1>;
girqs = <18 10>;
pcrs = <3 5>;
label = "PS2_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -333,7 +307,6 @@
interrupts = <101 1>;
girqs = <18 11>;
pcrs = <3 6>;
label = "PS2_1";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -342,7 +315,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005800 0x20>;
pcrs = <1 4>;
label = "PWM_0";
status = "disabled";
#pwm-cells = <2>;
};
@ -350,7 +322,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005810 0x20>;
pcrs = <1 20>;
label = "PWM_1";
status = "disabled";
#pwm-cells = <2>;
};
@ -358,7 +329,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005820 0x20>;
pcrs = <1 21>;
label = "PWM_2";
status = "disabled";
#pwm-cells = <2>;
};
@ -366,7 +336,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005830 0x20>;
pcrs = <1 22>;
label = "PWM_3";
status = "disabled";
#pwm-cells = <2>;
};
@ -374,7 +343,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005840 0x20>;
pcrs = <1 23>;
label = "PWM_4";
status = "disabled";
#pwm-cells = <2>;
};
@ -382,7 +350,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005850 0x20>;
pcrs = <1 24>;
label = "PWM_5";
status = "disabled";
#pwm-cells = <2>;
};
@ -390,7 +357,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005860 0x20>;
pcrs = <1 25>;
label = "PWM_6";
status = "disabled";
#pwm-cells = <2>;
};
@ -398,7 +364,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005870 0x20>;
pcrs = <1 26>;
label = "PWM_7";
status = "disabled";
#pwm-cells = <2>;
};
@ -406,7 +371,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005880 0x20>;
pcrs = <1 27>;
label = "PWM_8";
status = "disabled";
#pwm-cells = <2>;
};
@ -414,7 +378,6 @@
compatible = "microchip,xec-adc";
reg = <0x40007c00 0x90>;
interrupts = <78 0>, <79 0>;
label = "ADC_0";
status = "disabled";
#io-channel-cells = <1>;
clktime = <32>;
@ -425,7 +388,6 @@
interrupts = <135 0>;
girqs = <21 25>;
pcrs = <3 11>;
label = "KSCAN";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -436,7 +398,6 @@
interrupts = <70 4>;
girqs = <17 0>;
pcrs = <1 1>;
label = "PECI_0";
#address-cells = <1>;
#size-cells = <0>;
};
@ -445,7 +406,6 @@
reg = <0x40070000 0x400>;
interrupts = <91 2>;
clock-frequency = <12000000>;
label = "SPI_0";
rxdma = <11>;
txdma = <10>;
lines = <1>;
@ -464,7 +424,6 @@
interrupts = <71 4>;
girqs = <17 1>;
pcrs = <1 2>;
label = "TACH_0";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -475,7 +434,6 @@
interrupts = <72 4>;
girqs = <17 2>;
pcrs = <1 11>;
label = "TACH_1";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -486,7 +444,6 @@
interrupts = <73 4>;
girqs = <17 3>;
pcrs = <1 12>;
label = "TACH_2";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -497,7 +454,6 @@
interrupts = <159 4>;
girqs = <17 4>;
pcrs = <1 13>;
label = "TACH_3";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;

2
dts/arm/microchip/mec1701qsz.dtsi
View file

@ -34,7 +34,6 @@
interrupts = <40 0>;
clock-frequency = <1843200>;
current-speed = <38400>;
label = "UART_0";
reg-shift = <0>;
status = "disabled";
};
@ -44,7 +43,6 @@
interrupts = <41 0>;
clock-frequency = <1843200>;
current-speed = <38400>;
label = "UART_1";
reg-shift = <0>;
status = "disabled";
};

1
dts/arm/microchip/mec1727nsz.dtsi
View file

@ -38,7 +38,6 @@
compatible ="jedec,spi-nor";
/* 4 Mbit Flash */
size = <DT_SIZE_M(4)>;
label = "SST25PF040";
reg = <0>;
spi-max-frequency = <DT_FREQ_M(40)>;
status = "okay";

104
dts/arm/microchip/mec172xnsz.dtsi
View file

@ -39,14 +39,12 @@
soc {
ecs: ecs@4000fc00 {
reg = <0x4000fc00 0x200>;
label = "ECS";
};
pcr: pcr@40080100 {
compatible = "microchip,xec-pcr";
reg = <0x40080100 0x100 0x4000a400 0x100>;
reg-names = "pcrr", "vbatr";
interrupts = <174 0>;
label = "PCR";
core-clock-div = <1>;
pll-32k-src = <MCHP_XEC_CLK32K_SRC_SIL_OSC>;
periph-32k-src = <MCHP_XEC_CLK32K_SRC_SIL_OSC>;
@ -57,7 +55,6 @@
reg = <0x4000e000 0x400>;
direct-capable-girqs = <13 14 15 16 17 18 19 20 21 23>;
clocks = <&pcr 1 0>;
label = "ECIA_0";
#address-cells = <1>;
#size-cells = <1>;
@ -67,7 +64,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x0 0x14>;
interrupts = <0 0>;
label = "GIRQ_8";
girq-id = <0>;
sources = <0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@ -79,7 +75,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x14 0x14>;
interrupts = <1 0>;
label = "GIRQ_9";
girq-id = <1>;
sources = <0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@ -91,7 +86,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x28 0x14>;
interrupts = <2 0>;
label = "GIRQ_10";
girq-id = <2>;
sources = <0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@ -103,7 +97,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x3c 0x14>;
interrupts = <3 0>;
label = "GIRQ_11";
girq-id = <3>;
sources = <0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@ -115,7 +108,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x50 0x14>;
interrupts = <4 0>;
label = "GIRQ_12";
girq-id = <4>;
sources = <0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@ -127,7 +119,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x64 0x14>;
interrupts = <5 0>;
label = "GIRQ_13";
girq-id = <5>;
sources = <0 1 2 3 4>;
status = "disabled";
@ -136,7 +127,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x78 0x14>;
interrupts = <6 0>;
label = "GIRQ_14";
girq-id = <6>;
sources = <0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15>;
@ -146,7 +136,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x8c 0x14>;
interrupts = <7 0>;
label = "GIRQ_15";
girq-id = <7>;
sources = <0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@ -157,7 +146,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0xa0 0x14>;
interrupts = <8 0>;
label = "GIRQ_16";
girq-id = <8>;
sources = <0 2 3>;
status = "disabled";
@ -166,7 +154,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0xb4 0x14>;
interrupts = <9 0>;
label = "GIRQ_17";
girq-id = <9>;
sources = <0 1 2 3 4 8 9 10 11 12 13 14 15
16 17 20 21 22 23>;
@ -176,7 +163,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0xc8 0x14>;
interrupts = <10 0>;
label = "GIRQ_18";
girq-id = <10>;
sources = <0 1 2 3 4 5 6 7
10 20 21 22 23
@ -187,7 +173,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0xdc 0x14>;
interrupts = <11 0>;
label = "GIRQ_19";
girq-id = <11>;
sources = <0 1 2 3 4 5 6 7 8 9 10>;
status = "disabled";
@ -196,7 +181,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0xf0 0x14>;
interrupts = <12 0>;
label = "GIRQ_20";
girq-id = <12>;
sources = <3 9>;
status = "disabled";
@ -205,7 +189,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x104 0x14>;
interrupts = <13 0>;
label = "GIRQ_21";
girq-id = <13>;
sources = <2 3 4 5 6 7 8 9 10 11 12 13 14 15
18 19 25 26>;
@ -215,7 +198,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x118 0x14>;
interrupts = <255 0>;
label = "GIRQ_22";
girq-id = <14>;
sources = <0 1 2 3 4 5 9 15>;
status = "disabled";
@ -224,7 +206,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x12c 0x14>;
interrupts = <14 0>;
label = "GIRQ_23";
girq-id = <15>;
sources = <0 1 2 3 4 5 6 7 8 9 10 16 17>;
status = "disabled";
@ -233,7 +214,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x140 0x14>;
interrupts = <15 0>;
label = "GIRQ_24";
girq-id = <16>;
sources = <0 1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19
@ -244,7 +224,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x154 0x14>;
interrupts = <16 0>;
label = "GIRQ_25";
girq-id = <17>;
sources = <0 1 2 3 4 5 6 7 8 9 10 11
12 13 14 15>;
@ -254,7 +233,6 @@
compatible = "microchip,xec-ecia-girq";
reg = <0x168 0x14>;
interrupts = <17 0>;
label = "GIRQ_26";
girq-id = <18>;
sources = <0 1 2 3 4 5 6 12 13>;
status = "disabled";
@ -272,7 +250,6 @@
0x40081380 0x04 0x400813fc 0x04>;
interrupts = <3 2>;
gpio-controller;
label="GPIO000_036";
port-id = <0>;
girq-id = <11>;
#gpio-cells=<2>;
@ -283,7 +260,6 @@
0x40081384 0x04 0x400813f8 0x4>;
interrupts = <2 2>;
gpio-controller;
label="GPIO040_076";
port-id = <1>;
girq-id = <10>;
#gpio-cells=<2>;
@ -294,7 +270,6 @@
0x40081388 0x04 0x400813f4 0x04>;
gpio-controller;
interrupts = <1 2>;
label="GPIO100_136";
port-id = <2>;
girq-id = <9>;
#gpio-cells=<2>;
@ -305,7 +280,6 @@
0x4008138c 0x04 0x400813f0 0x04>;
gpio-controller;
interrupts = <0 2>;
label="GPIO140_176";
port-id = <3>;
girq-id = <8>;
#gpio-cells=<2>;
@ -316,7 +290,6 @@
0x40081390 0x04 0x400813ec 0x04>;
gpio-controller;
interrupts = <4 2>;
label="GPIO200_236";
port-id = <4>;
girq-id = <12>;
#gpio-cells=<2>;
@ -327,7 +300,6 @@
0x40081394 0x04 0x400813e8 0x04>;
gpio-controller;
interrupts = <17 2>;
label="GPIO240_276";
port-id = <5>;
girq-id = <26>;
#gpio-cells=<2>;
@ -339,13 +311,11 @@
interrupts = <171 0>;
girqs = <21 2>;
pcrs = <1 9>;
label = "WDT_0";
};
rtimer: timer@40007400 {
compatible = "microchip,xec-rtos-timer";
reg = <0x40007400 0x10>;
interrupts = <111 0>;
label = "RTIMER";
girqs = <23 10>;
};
timer0: timer@40000c00 {
@ -355,7 +325,6 @@
interrupts = <136 0>;
girqs = <23 0>;
pcrs = <1 30>;
label = "TIMER_0";
max-value = <0xFFFF>;
prescaler = <0>;
status = "disabled";
@ -367,7 +336,6 @@
interrupts = <137 0>;
girqs = <23 1>;
pcrs = <1 31>;
label = "TIMER_1";
max-value = <0xFFFF>;
prescaler = <0>;
status = "disabled";
@ -379,7 +347,6 @@
interrupts = <138 0>;
girqs = <23 2>;
pcrs = <3 21>;
label = "TIMER_2";
max-value = <0xFFFF>;
prescaler = <0>;
status = "disabled";
@ -391,7 +358,6 @@
interrupts = <139 0>;
girqs = <23 3>;
pcrs = <3 22>;
label = "TIMER_3";
max-value = <0xFFFF>;
prescaler = <0>;
status = "disabled";
@ -408,7 +374,6 @@
interrupts = <140 0>;
girqs = <23 4>;
pcrs = <3 23>;
label = "TIMER_4";
max-value = <0xFFFFFFFF>;
prescaler = <0>;
status = "disabled";
@ -420,7 +385,6 @@
interrupts = <141 0>;
girqs = <23 5>;
pcrs = <3 24>;
label = "TIMER_5";
max-value = <0xFFFFFFFF>;
prescaler = <0>;
status = "disabled";
@ -430,7 +394,6 @@
interrupts = <142 0>;
girqs = <23 6>;
pcrs = <4 2>;
label = "EVTMR_0";
status = "disabled";
};
cntr1: timer@40000d20 {
@ -438,7 +401,6 @@
interrupts = <143 0>;
girqs = <23 7>;
pcrs = <4 3>;
label = "EVTMR_1";
status = "disabled";
};
cntr2: timer@40000d40 {
@ -446,7 +408,6 @@
interrupts = <144 0>;
girqs = <23 8>;
pcrs = <4 3>;
label = "EVTMR_2";
status = "disabled";
};
cntr3: timer@40000d60 {
@ -454,7 +415,6 @@
interrupts = <145 0>;
girqs = <23 9>;
pcrs = <4 4>;
label = "EVTMR_3";
status = "disabled";
};
cctmr0: timer@40001000 {
@ -465,41 +425,35 @@
girqs = <18 20>, <18 21>, <18 22>, <18 23>, <18 24>,
<18 25>, <18 26>, <18 27>, <18 28>;
pcrs = <3 30>;
label = "CCTMR_0";
status = "disabled";
};
hibtimer0: timer@40009800 {
reg = <0x40009800 0x20>;
interrupts = <112 0>;
girqs = <23 16>;
label = "HIBTIMER_0";
};
hibtimer1: timer@40009820 {
reg = <0x40009820 0x20>;
interrupts = <113 0>;
girqs = <23 17>;
label = "HIBTIMER_1";
};
weektmr0: timer@4000ac80 {
reg = <0x4000ac80 0x80>;
interrupts = <114 0>, <115 0>, <116 0>,
<117 0>, <118 0>;
girqs = <21 3>, <21 4>, <21 5>, <21 6>, <21 7>;
label = "WEEKTMR_0";
status = "disabled";
};
bbram: bb-ram@4000a800 {
compatible = "microchip,xec-bbram";
reg = <0x4000a800 0x100>;
reg-names = "memory";
label = "BBRAM";
};
vci0: vci@4000ae00 {
reg = <0x4000ae00 0x40>;
interrupts = <121 0>, <122 0>, <123 0>,
<124 0>, <125 0>;
girqs = <21 10>, <21 11>, <21 12>, <21 13>, <21 14>;
label = "VCI_0";
status = "disabled";
};
dmac: dmac@40002400 {
@ -513,7 +467,6 @@
<14 8>, <14 9>, <14 10>, <14 11>,
<14 12>, <14 13>, <14 14>, <14 15>;
pcrs = <1 6>;
label = "DMA_0";
#dma-cells = <2>;
status = "disabled";
};
@ -524,7 +477,6 @@
interrupts = <20 1>;
girqs = <13 0>;
pcrs = <1 10>;
label = "I2C_SMB_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -536,7 +488,6 @@
interrupts = <21 1>;
girqs = <13 1>;
pcrs = <3 13>;
label = "I2C_SMB_1";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -548,7 +499,6 @@
interrupts = <22 1>;
girqs = <13 2>;
pcrs = <3 14>;
label = "I2C_SMB_2";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -560,7 +510,6 @@
interrupts = <23 1>;
girqs = <13 3>;
pcrs = <3 15>;
label = "I2C_SMB_3";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -572,7 +521,6 @@
interrupts = <158 1>;
girqs = <13 4>;
pcrs = <3 20>;
label = "I2C_SMB_4";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -583,7 +531,6 @@
interrupts = <100 1>;
girqs = <18 10>;
pcrs = <3 5>;
label = "PS2_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -592,7 +539,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005800 0x20>;
pcrs = <1 4>;
label = "PWM_0";
status = "disabled";
#pwm-cells = <2>;
};
@ -600,7 +546,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005810 0x20>;
pcrs = <1 20>;
label = "PWM_1";
status = "disabled";
#pwm-cells = <2>;
};
@ -608,7 +553,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005820 0x20>;
pcrs = <1 21>;
label = "PWM_2";
status = "disabled";
#pwm-cells = <2>;
};
@ -616,7 +560,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005830 0x20>;
pcrs = <1 22>;
label = "PWM_3";
status = "disabled";
#pwm-cells = <2>;
};
@ -624,7 +567,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005840 0x20>;
pcrs = <1 23>;
label = "PWM_4";
status = "disabled";
#pwm-cells = <2>;
};
@ -632,7 +574,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005850 0x20>;
pcrs = <1 24>;
label = "PWM_5";
status = "disabled";
#pwm-cells = <2>;
};
@ -640,7 +581,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005860 0x20>;
pcrs = <1 25>;
label = "PWM_6";
status = "disabled";
#pwm-cells = <2>;
};
@ -648,7 +588,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005870 0x20>;
pcrs = <1 26>;
label = "PWM_7";
status = "disabled";
#pwm-cells = <2>;
};
@ -656,7 +595,6 @@
compatible = "microchip,xec-pwm";
reg = <0x40005880 0x20>;
pcrs = <1 27>;
label = "PWM_8";
status = "disabled";
#pwm-cells = <2>;
};
@ -666,7 +604,6 @@
interrupts = <71 4>;
girqs = <17 1>;
pcrs = <1 2>;
label = "TACH_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -677,7 +614,6 @@
interrupts = <72 4>;
girqs = <17 2>;
pcrs = <1 11>;
label = "TACH_1";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -688,7 +624,6 @@
interrupts = <73 4>;
girqs = <17 3>;
pcrs = <1 12>;
label = "TACH_2";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -699,7 +634,6 @@
interrupts = <159 4>;
girqs = <17 4>;
pcrs = <1 13>;
label = "TACH_3";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -709,7 +643,6 @@
interrupts = <74 1>, <75 1>;
girqs = <17 20>, <17 21>;
pcrs = <3 12>;
label = "RPMFAN_0";
status = "disabled";
};
rpmfan1: rpmfan@4000a080 {
@ -717,7 +650,6 @@
interrupts = <76 1>, <77 1>;
girqs = <17 22>, <17 23>;
pcrs = <4 7>;
label = "RPMFAN_1";
status = "disabled";
};
adc0: adc@40007c00 {
@ -726,7 +658,6 @@
interrupts = <78 0>, <79 0>;
girqs = <17 8>, <17 9>;
pcrs = <3 3>;
label = "ADC_0";
status = "disabled";
#io-channel-cells = <1>;
};
@ -736,7 +667,6 @@
interrupts = <135 0>;
girqs = <21 25>;
pcrs = <3 11>;
label = "KSCAN";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -747,7 +677,6 @@
interrupts = <70 4>;
girqs = <17 0>;
pcrs = <1 1>;
label = "PECI_0";
#address-cells = <1>;
#size-cells = <0>;
};
@ -758,7 +687,6 @@
girqs = < MCHP_XEC_ECIA(18, 1, 10, 91) >;
pcrs = <4 8>;
clock-frequency = <12000000>;
label = "SPI_0";
lines = <1>;
chip_select = <0>;
#address-cells = <1>;
@ -770,7 +698,6 @@
interrupts = <92 2>, <93 2>;
girqs = <18 2>, <18 3>;
pcrs = <3 9>;
label = "SPI_1";
status = "disabled";
};
spi2: spi@40009480 {
@ -778,7 +705,6 @@
interrupts = <94 2>, <95 2>;
girqs = <18 4>, <18 5>;
pcrs = <4 22>;
label = "SPI_2";
status = "disabled";
};
prochot0: prochot@40003400 {
@ -786,7 +712,6 @@
interrupts = <87 0>;
girqs = <17 17>;
pcrs = <4 13>;
label = "PROCHOT_0";
status = "disabled";
};
rcid0: rcid@40001400 {
@ -794,7 +719,6 @@
interrupts = <80 0>;
girqs = <17 10>;
pcrs = <4 10>;
label = "RCID_0";
status = "disabled";
};
rcid1: rcid@40001480 {
@ -802,7 +726,6 @@
interrupts = <81 0>;
girqs = <17 11>;
pcrs = <4 11>;
label = "RCID_1";
status = "disabled";
};
rcid2: rcid@40001500 {
@ -810,7 +733,6 @@
interrupts = <82 0>;
girqs = <17 12>;
pcrs = <4 12>;
label = "RCID_2";
status = "disabled";
};
spip0: spip@40007000 {
@ -818,7 +740,6 @@
interrupts = <90 0>;
girqs = <18 0>;
pcrs = <4 16>;
label = "SPIP_0";
status = "disabled";
};
bbled0: bbled@4000b800 {
@ -826,7 +747,6 @@
interrupts = <83 0>;
girqs = <17 13>;
pcrs = <3 16>;
label = "BBLED_0";
status = "disabled";
};
bbled1: bbled@4000b900 {
@ -834,7 +754,6 @@
interrupts = <84 0>;
girqs = <17 14>;
pcrs = <3 17>;
label = "BBLED_1";
status = "disabled";
};
bbled2: bbled@4000ba00 {
@ -842,7 +761,6 @@
interrupts = <85 0>;
girqs = <17 15>;
pcrs = <3 18>;
label = "BBLED_2";
status = "disabled";
};
bbled3: bbled@4000bb00 {
@ -850,7 +768,6 @@
interrupts = <86 0>;
girqs = <17 16>;
pcrs = <3 25>;
label = "BBLED_3";
status = "disabled";
};
bclink0: bclink@4000cd00 {
@ -858,19 +775,16 @@
interrupts = <96 0>, <97 0>;
girqs = <18 7>, <18 6>;
pcrs = <3 19>;
label = "BCLINK_0";
status = "disabled";
};
tfdp0: tfdp@40008c00 {
reg = <0x40008c00 0x10>;
pcrs = <1 7>;
label = "TFDP_0";
status = "disabled";
};
glblcfg0: glblcfg@400fff00 {
reg = <0x400fff00 0x40>;
pcrs = <2 12>;
label = "GLBLCFG_0";
status = "disabled";
};
espi0: espi@400f3400 {
@ -894,7 +808,6 @@
MCHP_XEC_ECIA(19, 7, 11, 110)
MCHP_XEC_ECIA(19, 8, 11, 156) >;
pcrs = <2 19>;
label = "ESPI_0";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@ -906,7 +819,6 @@
girqs = < MCHP_XEC_ECIA(15, 20, 7, 60) >;
pcrs = <2 17>;
ldn = <0>;
label = "MBOX_0";
status = "disabled";
};
kbc0: kbc@400f0400 {
@ -917,7 +829,6 @@
girqs = < MCHP_XEC_ECIA(15, 18, 7, 58)
MCHP_XEC_ECIA(15, 19, 7, 59) >;
ldn = <1>;
label = "KBC_0";
status = "disabled";
};
acpi_ec0: acpi_ec@400f0800 {
@ -928,7 +839,6 @@
girqs = < MCHP_XEC_ECIA(15, 5, 7, 45)
MCHP_XEC_ECIA(15, 6, 7, 46) >;
ldn = <2>;
label = "ACPI_EC_0";
status = "disabled";
};
acpi_ec1: acpi_ec@400f0c00 {
@ -939,7 +849,6 @@
girqs = < MCHP_XEC_ECIA(15, 7, 7, 47)
MCHP_XEC_ECIA(15, 8, 7, 48) >;
ldn = <3>;
label = "ACPI_EC_1";
status = "disabled";
};
acpi_ec2: acpi_ec@400f1000 {
@ -950,7 +859,6 @@
girqs = < MCHP_XEC_ECIA(15, 9, 7, 49)
MCHP_XEC_ECIA(15, 10, 7, 50) >;
ldn = <4>;
label = "ACPI_EC_2";
status = "disabled";
};
acpi_ec3: acpi_ec@400f1400 {
@ -961,7 +869,6 @@
girqs = < MCHP_XEC_ECIA(15, 11, 7, 51)
MCHP_XEC_ECIA(15, 12, 7, 52) >;
ldn = <5>;
label = "ACPI_EC_3";
status = "disabled";
};
acpi_ec4: acpi_ec@400f1800 {
@ -972,7 +879,6 @@
girqs = < MCHP_XEC_ECIA(15, 13, 7, 53)
MCHP_XEC_ECIA(15, 14, 7, 54) >;
ldn = <6>;
label = "ACPI_EC_4";
status = "disabled";
};
acpi_pm1: acpi_pm1@400f1c00 {
@ -984,13 +890,11 @@
MCHP_XEC_ECIA(15, 16, 7, 56)
MCHP_XEC_ECIA(15, 17, 7, 57) >;
ldn = <7>;
label = "ACPI_PM1";
status = "disabled";
};
port92: port92@400f2000 {
compatible = "microchip,xec-espi-host-dev";
reg = <0x400f2000 0x400>;
label = "PORT92";
ldn = <8>;
status = "disabled";
};
@ -1000,7 +904,6 @@
interrupts = <40 0>;
clock-frequency = <1843200>;
current-speed = <38400>;
label = "UART_0";
girqs = <15 0>;
pcrs = <2 1>;
ldn = <9>;
@ -1012,7 +915,6 @@
interrupts = <41 0>;
clock-frequency = <1843200>;
current-speed = <38400>;
label = "UART_1";
girqs = <15 1>;
pcrs = <2 2>;
ldn = <10>;
@ -1023,7 +925,6 @@
reg = <0x400f4000 0x400>;
interrupts = <42 0>;
girqs = < MCHP_XEC_ECIA(15, 2, 7, 42) >;
label = "EMI_0";
ldn = <16>;
status = "disabled";
};
@ -1032,7 +933,6 @@
reg = <0x400f4400 0x400>;
interrupts = <43 0>;
girqs = < MCHP_XEC_ECIA(15, 3, 7, 43) >;
label = "EMI_1";
ldn = <17>;
status = "disabled";
};
@ -1041,7 +941,6 @@
reg = <0x400f4800 0x400>;
interrupts = <44 0>;
girqs = < MCHP_XEC_ECIA(15, 4, 7, 44) >;
label = "EMI_2";
ldn = <18>;
status = "disabled";
};
@ -1052,7 +951,6 @@
girqs = < MCHP_XEC_ECIA(21, 8, 13, 119)
MCHP_XEC_ECIA(21, 9, 13, 120) >;
pcrs = <2 18>;
label = "RTC_0";
ldn = <20>;
status = "disabled";
};
@ -1064,14 +962,12 @@
girqs = < MCHP_XEC_ECIA(15, 22, 7, 62) >;
pcrs = <2 25>;
ldn = <32>;
label = "P80BD_0";
status = "disabled";
};
/* Capture writes to an 8-bit I/O and map to one of 0x80 to 0x83 */
p80bd0_alias: p80bd@400f8400 {
compatible = "microchip,xec-espi-host-dev";
reg = <0x400f8400 0x400>;
label = "P80BD_0_ALIAS";
ldn = <33>;
host-io = <0x90>;
/* map 0x90 to 0x80 */

9
dts/arm/nuvoton/m48x.dtsi
View file

@ -25,7 +25,6 @@
flash0: flash@0 {
compatible = "serial-flash";
label = "FLASH_NUMICRO";
erase-block-size = <4096>;
write-block-size = <1>;
};
@ -41,56 +40,48 @@
compatible = "nuvoton,numicro-uart";
reg = <0x40070000 0x1000>;
status = "disabled";
label = "UART_0";
};
uart1: serial@40071000 {
compatible = "nuvoton,numicro-uart";
reg = <0x40071000 0x1000>;
status = "disabled";
label = "UART_1";
};
uart2: serial@40072000 {
compatible = "nuvoton,numicro-uart";
reg = <0x40072000 0x1000>;
status = "disabled";
label = "UART_2";
};
uart3: serial@40073000 {
compatible = "nuvoton,numicro-uart";
reg = <0x40073000 0x1000>;
status = "disabled";
label = "UART_3";
};
uart4: serial@40074000 {
compatible = "nuvoton,numicro-uart";
reg = <0x40074000 0x1000>;
status = "disabled";
label = "UART_4";
};
uart5: serial@40075000 {
compatible = "nuvoton,numicro-uart";
reg = <0x40075000 0x1000>;
status = "disabled";
label = "UART_5";
};
uart6: serial@40076000 {
compatible = "nuvoton,numicro-uart";
reg = <0x40076000 0x1000>;
status = "disabled";
label = "UART_6";
};
uart7: serial@40077000 {
compatible = "nuvoton,numicro-uart";
reg = <0x40077000 0x1000>;
status = "disabled";
label = "UART_7";
};
};

62
dts/arm/nuvoton/npcx.dtsi
View file

@ -66,7 +66,6 @@
reg = <0x400af000 0x80
0x400af100 0x1>;
reg-names = "memory", "status";
label = "BBRAM";
};
pcc: clock-controller@4000d000 {
@ -78,7 +77,6 @@
reg = <0x4000d000 0x2000
0x400b5000 0x2000>;
reg-names = "pmc", "cdcg";
label = "PMC_CDCG";
};
scfg: scfg@400c3000 {
@ -90,7 +88,6 @@
reg-names = "scfg", "glue";
#alt-cells = <3>;
#lvol-cells = <2>;
label = "SCFG";
};
mdc: mdc@4000c000 {
@ -110,7 +107,6 @@
reg = <0x400bb000 0x2000>;
index = <0>;
#miwu-cells = <2>;
label="MIWU_0";
};
miwu1: miwu@400bd000 {
@ -118,7 +114,6 @@
reg = <0x400bd000 0x2000>;
index = <1>;
#miwu-cells = <2>;
label="MIWU_1";
};
miwu2: miwu@400bf000 {
@ -126,7 +121,6 @@
reg = <0x400bf000 0x2000>;
index = <2>;
#miwu-cells = <2>;
label="MIWU_2";
};
gpio0: gpio@40081000 {
@ -135,7 +129,6 @@
gpio-controller;
index = <0x0>;
#gpio-cells=<2>;
label="GPIO_0";
};
gpio1: gpio@40083000 {
@ -144,7 +137,6 @@
gpio-controller;
index = <0x1>;
#gpio-cells=<2>;
label="GPIO_1";
};
gpio2: gpio@40085000 {
@ -153,7 +145,6 @@
gpio-controller;
index = <0x2>;
#gpio-cells=<2>;
label="GPIO_2";
};
gpio3: gpio@40087000 {
@ -162,7 +153,6 @@
gpio-controller;
index = <0x3>;
#gpio-cells=<2>;
label="GPIO_3";
};
gpio4: gpio@40089000 {
@ -171,7 +161,6 @@
gpio-controller;
index = <0x4>;
#gpio-cells=<2>;
label="GPIO_4";
};
gpio5: gpio@4008b000 {
@ -180,7 +169,6 @@
gpio-controller;
index = <0x5>;
#gpio-cells=<2>;
label="GPIO_5";
};
gpio6: gpio@4008d000 {
@ -189,7 +177,6 @@
gpio-controller;
index = <0x6>;
#gpio-cells=<2>;
label="GPIO_6";
};
gpio7: gpio@4008f000 {
@ -198,7 +185,6 @@
gpio-controller;
index = <0x7>;
#gpio-cells=<2>;
label="GPIO_7";
};
gpio8: gpio@40091000 {
@ -207,7 +193,6 @@
gpio-controller;
index = <0x8>;
#gpio-cells=<2>;
label="GPIO_8";
};
gpio9: gpio@40093000 {
@ -216,7 +201,6 @@
gpio-controller;
index = <0x9>;
#gpio-cells=<2>;
label="GPIO_9";
};
gpioa: gpio@40095000 {
@ -225,7 +209,6 @@
gpio-controller;
index = <0xA>;
#gpio-cells=<2>;
label="GPIO_A";
};
gpiob: gpio@40097000 {
@ -234,7 +217,6 @@
gpio-controller;
index = <0xB>;
#gpio-cells=<2>;
label="GPIO_B";
};
gpioc: gpio@40099000 {
@ -243,7 +225,6 @@
gpio-controller;
index = <0xC>;
#gpio-cells=<2>;
label="GPIO_C";
};
gpiod: gpio@4009b000 {
@ -252,7 +233,6 @@
gpio-controller;
index = <0xD>;
#gpio-cells=<2>;
label="GPIO_D";
};
gpioe: gpio@4009d000 {
@ -261,7 +241,6 @@
gpio-controller;
index = <0xE>;
#gpio-cells=<2>;
label="GPIO_E";
};
gpiof: gpio@4009f000 {
@ -270,7 +249,6 @@
gpio-controller;
index = <0xF>;
#gpio-cells=<2>;
label="GPIO_F";
};
pwm0: pwm@40080000 {
@ -280,7 +258,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 0>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_0";
};
pwm1: pwm@40082000 {
@ -290,7 +267,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 1>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_1";
};
pwm2: pwm@40084000 {
@ -300,7 +276,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 2>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_2";
};
pwm3: pwm@40086000 {
@ -310,7 +285,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 3>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_3";
};
pwm4: pwm@40088000 {
@ -320,7 +294,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 4>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_4";
};
pwm5: pwm@4008a000 {
@ -330,7 +303,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 5>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_5";
};
pwm6: pwm@4008c000 {
@ -340,7 +312,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 6>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_6";
};
pwm7: pwm@4008e000 {
@ -350,7 +321,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL2 7>;
#pwm-cells = <3>;
status = "disabled";
label = "PWM_7";
};
adc0: adc@400d1000 {
@ -360,14 +330,12 @@
interrupts = <10 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB1 NPCX_PWDWN_CTL4 4>;
status = "disabled";
label = "ADC_0";
};
twd0: watchdog@400d8000 {
compatible = "nuvoton,npcx-watchdog";
reg = <0x400d8000 0x2000>;
t0-out = <&wui_t0out>;
label = "TWD_0";
};
espi0: espi@4000a000 {
@ -379,7 +347,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL6 7>;
/* WUI maps for eSPI signals */
espi-rst-wui = <&wui_espi_rst>;
label = "ESPI_0";
#address-cells = <1>;
#size-cells = <0>;
@ -417,7 +384,6 @@
<&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL5 5>,
<&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL5 6>,
<&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL5 7>;
label = "HOST_SUBS";
};
/* I2c Controllers - Do not use them as i2c node directly */
@ -426,7 +392,6 @@
reg = <0x40009000 0x1000>;
interrupts = <13 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL3 0>;
label = "I2CCTRL_0";
status = "disabled";
};
@ -435,7 +400,6 @@
reg = <0x4000b000 0x1000>;
interrupts = <14 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL3 1>;
label = "I2CCTRL_1";
status = "disabled";
};
@ -444,7 +408,6 @@
reg = <0x400c0000 0x1000>;
interrupts = <36 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL3 2>;
label = "I2CCTRL_2";
status = "disabled";
};
@ -453,7 +416,6 @@
reg = <0x400c2000 0x1000>;
interrupts = <37 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL3 3>;
label = "I2CCTRL_3";
status = "disabled";
};
@ -462,7 +424,6 @@
reg = <0x40008000 0x1000>;
interrupts = <19 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL3 4>;
label = "I2CCTRL_4";
status = "disabled";
};
@ -471,7 +432,6 @@
reg = <0x40017000 0x1000>;
interrupts = <20 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL7 0>;
label = "I2CCTRL_5";
status = "disabled";
};
@ -480,7 +440,6 @@
reg = <0x40018000 0x1000>;
interrupts = <16 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL7 1>;
label = "I2CCTRL_6";
status = "disabled";
};
@ -489,7 +448,6 @@
reg = <0x40019000 0x1000>;
interrupts = <8 3>;
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL7 2>;
label = "I2CCTRL_7";
status = "disabled";
};
@ -497,7 +455,6 @@
compatible = "nuvoton,npcx-tach";
reg = <0x400e1000 0x2000>;
clocks = <&pcc NPCX_CLOCK_BUS_LFCLK NPCX_PWDWN_CTL1 5>;
label = "TACH_1";
status = "disabled";
};
@ -505,7 +462,6 @@
compatible = "nuvoton,npcx-tach";
reg = <0x400e3000 0x2000>;
clocks = <&pcc NPCX_CLOCK_BUS_LFCLK NPCX_PWDWN_CTL1 6>;
label = "TACH_2";
status = "disabled";
};
@ -514,34 +470,29 @@
reg = <0x400b1000 0x1000>;
interrupts = <21 4>;
clocks = <&pcc NPCX_CLOCK_BUS_FREERUN NPCX_PWDWN_CTL1 3>;
label = "PS2_CTRL_0";
/* PS2 Channels - Please use them as PS2 node */
ps2_channel0: io_ps2_channel0 {
compatible = "nuvoton,npcx-ps2-channel";
channel = <0x00>;
label = "PS2_CHANNEL_0";
status = "disabled";
};
ps2_channel1: io_ps2_channel1 {
compatible = "nuvoton,npcx-ps2-channel";
channel = <0x01>;
label = "PS2_CHANNEL_1";
status = "disabled";
};
ps2_channel2: io_ps2_channel2 {
compatible = "nuvoton,npcx-ps2-channel";
channel = <0x02>;
label = "PS2_CHANNEL_2";
status = "disabled";
};
ps2_channel3: io_ps2_channel3 {
compatible = "nuvoton,npcx-ps2-channel";
channel = <0x03>;
label = "PS2_CHANNEL_3";
status = "disabled";
};
};
@ -553,7 +504,6 @@
#size-cells = <0>;
reg = <0x40020000 0x2000>;
clocks = <&pcc NPCX_CLOCK_BUS_APB3 NPCX_PWDWN_CTL1 2>;
label = "SPI_FIU";
};
};
@ -564,7 +514,6 @@
*/
host_uart: io_host_uart {
compatible = "nuvoton,npcx-host-uart";
label = "HOST_UART_IO";
status = "disabled";
};
@ -574,7 +523,6 @@
#size-cells = <0>;
port = <0x00>;
controller = <&i2c_ctrl0>;
label = "I2C_0_PORT_0";
status = "disabled";
};
@ -584,7 +532,6 @@
#size-cells = <0>;
port = <0x10>;
controller = <&i2c_ctrl1>;
label = "I2C_1_PORT_0";
status = "disabled";
};
@ -594,7 +541,6 @@
#size-cells = <0>;
port = <0x20>;
controller = <&i2c_ctrl2>;
label = "I2C_2_PORT_0";
status = "disabled";
};
@ -604,7 +550,6 @@
#size-cells = <0>;
port = <0x30>;
controller = <&i2c_ctrl3>;
label = "I2C_3_PORT_0";
status = "disabled";
};
@ -614,7 +559,6 @@
#size-cells = <0>;
port = <0x41>;
controller = <&i2c_ctrl4>;
label = "I2C_4_PORT_1";
status = "disabled";
};
@ -624,7 +568,6 @@
#size-cells = <0>;
port = <0x50>;
controller = <&i2c_ctrl5>;
label = "I2C_5_PORT_0";
status = "disabled";
};
@ -634,7 +577,6 @@
#size-cells = <0>;
port = <0x51>;
controller = <&i2c_ctrl5>;
label = "I2C_5_PORT_1";
status = "disabled";
};
@ -644,7 +586,6 @@
#size-cells = <0>;
port = <0x60>;
controller = <&i2c_ctrl6>;
label = "I2C_6_PORT_0";
status = "disabled";
};
@ -654,7 +595,6 @@
#size-cells = <0>;
port = <0x61>;
controller = <&i2c_ctrl6>;
label = "I2C_6_PORT_1";
status = "disabled";
};
@ -664,13 +604,11 @@
#size-cells = <0>;
port = <0x70>;
controller = <&i2c_ctrl7>;
label = "I2C_7_PORT_0";
status = "disabled";
};
power_ctrl_psl: power-ctrl-psl {
compatible = "nuvoton,npcx-power-psl";
label = "POWER_CONTROL_PSL";
status = "disabled";
};
};

1
dts/arm/nuvoton/npcx/npcx-miwus-wui-map.dtsi
View file

@ -504,7 +504,6 @@
compatible = "nuvoton,npcx-miwu";
index = <3>;
#miwu-cells = <2>;
label="MIWU_NONE";
status = "disabled";
};
};

3
dts/arm/nuvoton/npcx7.dtsi
View file

@ -66,7 +66,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_LFCLK NPCX_PWDWN_CTL4 3
&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL7 5>;
interrupts = <46 1>; /* Event timer interrupt */
label = "ITIM";
};
uart1: serial@400c4000 {
@ -76,7 +75,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL1 4>;
uart-rx = <&wui_cr_sin1>;
status = "disabled";
label = "UART_1";
};
uart2: serial@400c6000 {
@ -86,7 +84,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL7 6>;
uart-rx = <&wui_cr_sin2>;
status = "disabled";
label = "UART_2";
};
/* Default clock and power settings in npcx9 series */

1
dts/arm/nuvoton/npcx7m6fb.dtsi
View file

@ -37,7 +37,6 @@
compatible ="jedec,spi-nor";
/* 8388608 bits = 1 Mbytes */
size = <0x800000>;
label = "W25Q80";
reg = <0>;
spi-max-frequency = <50000000>;
status = "okay";

1
dts/arm/nuvoton/npcx7m6fc.dtsi
View file

@ -37,7 +37,6 @@
compatible ="jedec,spi-nor";
/* 4194304 bits = 512K Bytes */
size = <0x400000>;
label = "W25Q40";
reg = <0>;
spi-max-frequency = <50000000>;
status = "okay";

1
dts/arm/nuvoton/npcx7m7fc.dtsi
View file

@ -41,7 +41,6 @@
compatible ="jedec,spi-nor";
/* 4194304 bits = 512K Bytes */
size = <0x400000>;
label = "W25Q40";
reg = <0>;
spi-max-frequency = <50000000>;
status = "okay";

5
dts/arm/nuvoton/npcx9.dtsi
View file

@ -67,7 +67,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_LFCLK NPCX_PWDWN_CTL4 0
&pcc NPCX_CLOCK_BUS_APB2 NPCX_PWDWN_CTL7 5>;
interrupts = <28 1>; /* Event timer interrupt */
label = "ITIM";
};
uart1: serial@400e0000 {
@ -77,7 +76,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB4 NPCX_PWDWN_CTL1 4>;
uart-rx = <&wui_cr_sin1>;
status = "disabled";
label = "UART_1";
};
uart2: serial@400e2000 {
@ -87,7 +85,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB4 NPCX_PWDWN_CTL7 6>;
uart-rx = <&wui_cr_sin2>;
status = "disabled";
label = "UART_2";
};
uart3: serial@400e4000 {
@ -97,7 +94,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB4 NPCX_PWDWN_CTL7 4>;
uart-rx = <&wui_cr_sin3>;
status = "disabled";
label = "UART_3";
};
uart4: serial@400e6000 {
@ -107,7 +103,6 @@
clocks = <&pcc NPCX_CLOCK_BUS_APB4 NPCX_PWDWN_CTL7 3>;
uart-rx = <&wui_cr_sin4>;
status = "disabled";
label = "UART_4";
};
/* Default clock and power settings in npcx9 series */

1
dts/arm/nuvoton/npcx9m3f.dtsi
View file

@ -31,7 +31,6 @@
compatible ="jedec,spi-nor";
/* 4194304 bits = 512K Bytes */
size = <0x400000>;
label = "W25Q40";
reg = <0>;
spi-max-frequency = <50000000>;
status = "okay";

1
dts/arm/nuvoton/npcx9m6f.dtsi
View file

@ -31,7 +31,6 @@
compatible ="jedec,spi-nor";
/* 4194304 bits = 512K Bytes */
size = <0x400000>;
label = "W25Q40";
reg = <0>;
spi-max-frequency = <50000000>;
status = "okay";

1
dts/arm/nuvoton/npcx9m7f.dtsi
View file

@ -31,7 +31,6 @@
compatible ="jedec,spi-nor";
/* 8388608 bits = 1 Mbytes */
size = <0x800000>;
label = "W25Q80";
reg = <0>;
spi-max-frequency = <50000000>;
status = "okay";

2
dts/arm/quicklogic/quicklogic_eos_s3.dtsi
View file

@ -46,7 +46,6 @@
clocks = <&uartclk>;
interrupts = <7 3>;
interrupt-names = "rx";
label = "UART_0";
};
gpio: gpio {
@ -57,7 +56,6 @@
ngpios = <8>;
pin-secondary-config = <0x00>;
gpio-controller;
label = "GPIO";
};
};
};

1
dts/arm/renesas/gen3/r8a77951.dtsi
View file

@ -13,7 +13,6 @@
compatible = "renesas,r8a7795-cpg-mssr";
reg = <0xe6150000 0x1000>;
#clock-cells = <2>;
label = "cpg";
};
can0: can@e6c30000 {

8
dts/arm/renesas/gen3/rcar_gen3_cr7.dtsi
View file

@ -49,7 +49,6 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL IRQ_DEFAULT_PRIORITY>;
clocks = <&cpg CPG_MOD 907>;
status = "disabled";
label = "gpio5";
};
gpio6: gpio@e6055400 {
@ -61,7 +60,6 @@
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL IRQ_DEFAULT_PRIORITY>;
clocks = <&cpg CPG_MOD 906>;
status = "disabled";
label = "gpio6";
};
pfc: pin-controller@e6060000 {
@ -80,7 +78,6 @@
reg = <0xe60f0500 0x1004>;
clocks = <&cpg CPG_MOD 303>;
status = "disabled";
label = "cmt0";
};
can0: can@e6c30000 {
@ -92,7 +89,6 @@
sjw = <1>;
sample-point = <875>;
status = "disabled";
label = "can0";
};
i2c2: i2c@e6510000 {
@ -106,7 +102,6 @@
IRQ_DEFAULT_PRIORITY>;
clocks = <&cpg CPG_MOD 929>;
status = "disabled";
label = "i2c2";
};
i2c4: i2c@e66d8000 {
@ -120,7 +115,6 @@
IRQ_DEFAULT_PRIORITY>;
clocks = <&cpg CPG_MOD 927>;
status = "disabled";
label = "i2c4";
};
scif1: serial@e6e68000 {
@ -131,7 +125,6 @@
IRQ_DEFAULT_PRIORITY>;
current-speed = <115200>;
status = "disabled";
label = "scif1";
};
scif2: serial@e6e88000 {
@ -142,7 +135,6 @@
IRQ_DEFAULT_PRIORITY>;
current-speed = <115200>;
status = "disabled";
label = "scif2";
};
};
};

11
dts/arm/rpi_pico/rp2040.dtsi
View file

@ -35,7 +35,6 @@
flash0: flash@10000000 {
compatible = "soc-nv-flash";
label = "FLASH_RP2";
write-block-size = <1>;
};
@ -58,14 +57,12 @@
reg-width = <4>;
active-low = <0>;
#reset-cells = <1>;
label = "RESET";
};
pinctrl: pin-controller@40014000 {
compatible = "raspberrypi,pico-pinctrl";
reg = <0x40014000 DT_SIZE_K(4)>;
status = "okay";
label = "PINCTRL";
};
gpio0: gpio@40014000 {
@ -74,7 +71,6 @@
interrupts = <13 RPI_PICO_DEFAULT_IRQ_PRIORITY>;
gpio-controller;
#gpio-cells = <2>;
label = "GPIO_0";
status = "disabled";
ngpios = <30>;
};
@ -86,7 +82,6 @@
resets = <&reset RPI_PICO_RESETS_RESET_UART0>;
interrupts = <20 RPI_PICO_DEFAULT_IRQ_PRIORITY>;
interrupt-names = "uart0";
label = "UART_0";
status = "disabled";
};
@ -97,7 +92,6 @@
resets = <&reset RPI_PICO_RESETS_RESET_UART1>;
interrupts = <21 RPI_PICO_DEFAULT_IRQ_PRIORITY>;
interrupt-names = "uart1";
label = "UART_1";
status = "disabled";
};
@ -109,7 +103,6 @@
clocks = <&system_clk>;
interrupts = <23 RPI_PICO_DEFAULT_IRQ_PRIORITY>;
interrupt-names = "i2c0";
label = "I2C_0";
status = "disabled";
};
@ -121,7 +114,6 @@
clocks = <&system_clk>;
interrupts = <24 RPI_PICO_DEFAULT_IRQ_PRIORITY>;
interrupt-names = "i2c1";
label = "I2C_1";
status = "disabled";
};
@ -129,7 +121,6 @@
compatible = "raspberrypi,pico-watchdog";
reg = <0x40058000 DT_SIZE_K(4)>;
clocks = <&xtal_clk>;
label = "WDT_0";
status = "disabled";
};
@ -140,7 +131,6 @@
interrupts = <5 RPI_PICO_DEFAULT_IRQ_PRIORITY>;
interrupt-names = "usbctrl";
num-bidir-endpoints = <16>;
label = "USBD";
status = "disabled";
};
@ -151,7 +141,6 @@
clocks = <&system_clk>;
interrupts = <4 RPI_PICO_DEFAULT_IRQ_PRIORITY>;
interrupt-names = "PWM_IRQ_WRAP";
label = "PWM_0";
status = "disabled";
#pwm-cells = <3>;
};

10
dts/arm/xilinx/zynq7000.dtsi
View file

@ -46,7 +46,6 @@
<0xf8f00100 0x100>;
interrupt-controller;
#interrupt-cells = <4>;
label = "gic";
};
gem0: ethernet@e000b000 {
@ -59,7 +58,6 @@
<GIC_SPI 23 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
label = "gem0";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
@ -87,7 +85,6 @@
<GIC_SPI 46 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
label = "gem1";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
@ -112,7 +109,6 @@
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
label = "uart0";
};
uart1: uart@e0001000 {
@ -122,7 +118,6 @@
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
label = "uart1";
};
psgpio: gpio@e000a000 {
@ -132,7 +127,6 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
label = "psgpio";
ranges;
#address-cells = <1>;
@ -141,7 +135,6 @@
psgpio_bank0: psgpio_bank@0 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x0>;
label = "psgpio_bank0_mio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@ -151,7 +144,6 @@
psgpio_bank1: psgpio_bank@1 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x1>;
label = "psgpio_bank1_mio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <22>;
@ -161,7 +153,6 @@
psgpio_bank2: psgpio_bank@2 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x2>;
label = "psgpio_bank2_emio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@ -171,7 +162,6 @@
psgpio_bank3: psgpio_bank@3 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x3>;
label = "psgpio_bank3_emio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;

17
dts/arm/xilinx/zynqmp.dtsi
View file

@ -34,7 +34,6 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
label = "UART_0";
};
uart1: uart@ff010000 {
@ -44,7 +43,6 @@
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
label = "UART_1";
};
ttc0: timer@ff110000 {
@ -58,7 +56,6 @@
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff110000 0x1000>;
label = "ttc0";
};
ttc1: timer@ff120000 {
@ -72,7 +69,6 @@
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff120000 0x1000>;
label = "ttc1";
};
ttc2: timer@ff130000 {
@ -86,7 +82,6 @@
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff130000 0x1000>;
label = "ttc2";
};
ttc3: timer@ff140000 {
@ -100,7 +95,6 @@
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1", "irq_2";
reg = <0xff140000 0x1000>;
label = "ttc3";
};
gem0: ethernet@ff0b0000 {
@ -113,7 +107,6 @@
<GIC_SPI 58 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
label = "gem0";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
@ -141,7 +134,6 @@
<GIC_SPI 60 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
label = "gem1";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
@ -169,7 +161,6 @@
<GIC_SPI 62 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
label = "gem2";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
@ -197,7 +188,6 @@
<GIC_SPI 64 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0", "irq_1";
label = "gem3";
mdio-phy-address = <XLNX_GEM_PHY_AUTO_DETECT>;
phy-poll-interval = <1000>;
link-speed = <XLNX_GEM_LINK_SPEED_100MBIT>;
@ -222,7 +212,6 @@
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL
IRQ_DEFAULT_PRIORITY>;
interrupt-names = "irq_0";
label = "psgpio";
ranges;
#address-cells = <1>;
@ -231,7 +220,6 @@
psgpio_bank0: psgpio_bank@0 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x0>;
label = "psgpio_bank0_mio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <26>;
@ -241,7 +229,6 @@
psgpio_bank1: psgpio_bank@1 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x1>;
label = "psgpio_bank1_mio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <26>;
@ -251,7 +238,6 @@
psgpio_bank2: psgpio_bank@2 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x2>;
label = "psgpio_bank2_mio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <26>;
@ -261,7 +247,6 @@
psgpio_bank3: psgpio_bank@3 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x3>;
label = "psgpio_bank3_emio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@ -271,7 +256,6 @@
psgpio_bank4: psgpio_bank@4 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x4>;
label = "psgpio_bank4_emio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
@ -281,7 +265,6 @@
psgpio_bank5: psgpio_bank@5 {
compatible = "xlnx,ps-gpio-bank";
reg = <0x5>;
label = "psgpio_bank5_emio";
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;