patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

kconfig: Global whitespace/consistency cleanup

Browse source 
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).

Go for the most common style:

 - Indent properties with a single tab, including for choices.

   Properties on choices work exactly the same syntactically as
   properties on symbols, so not sure how the no-indentation thing
   happened.

 - Indent help texts with a tab followed by two spaces

 - Put a space between 'config' and the symbol name, not a tab. This
   also helps when grepping for definitions.

 - Do '# A comment' instead of '#A comment'

I tweaked Kconfiglib a bit to find most of the stuff.

Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit is contained in:
Ulf Magnusson 2019-11-01 10:24:07 +01:00 committed by Kumar Gala
parent 9555f82d28
commit 975de21858
197 changed files with 657 additions and 658 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

13
arch/Kconfig
View file

@ -71,13 +71,12 @@ source "subsys/logging/Kconfig.template.log_config"
config BIG_ENDIAN
bool
help
This option tells the build system that the target system is
big-endian. Little-endian architecture is the default and
should leave this option unselected. This option is selected
by arch/$ARCH/Kconfig, soc/**/Kconfig, or boards/**/Kconfig
and the user should generally avoid modifying it. The option
is used to select linker script OUTPUT_FORMAT and command
line option for gen_isr_tables.py.
This option tells the build system that the target system is big-endian.
Little-endian architecture is the default and should leave this option
unselected. This option is selected by arch/$ARCH/Kconfig,
soc/**/Kconfig, or boards/**/Kconfig and the user should generally avoid
modifying it. The option is used to select linker script OUTPUT_FORMAT
and command line option for gen_isr_tables.py.
config 64BIT
bool

2
boards/Kconfig
View file

@ -18,7 +18,9 @@ config QEMU_TARGET
choice
prompt "Board Selection"
source "$(BOARD_DIR)/Kconfig.board"
endchoice

2
boards/arm/mec1501modular_assy6885/Kconfig.defconfig
View file

@ -99,7 +99,6 @@ if !RTOS_TIMER
# If RTOS timer is not enabled we use ARM Cortex-M
# SYSTICK. SYSTICK frequency is 48MHz divided by
# SOC_MEC1501_PROC_CLK_DIV.
#
config SYS_CLOCK_HW_CYCLES_PER_SEC
default 48000000
@ -119,4 +118,3 @@ config PS2_XEC_1
endif # PS2
endif # BOARD_MEC1501MODULAR_ASSY6885

4
boards/arm/nrf52840_pca10059/Kconfig
View file

@ -15,7 +15,7 @@ config BOARD_HAS_NRF5_BOOTLOADER
bool "Board has nRF5 bootloader"
default y
help
If selected, applications are linked so that they can be loaded by
Nordic nRF5 bootloader.
If selected, applications are linked so that they can be loaded by Nordic
nRF5 bootloader.
endif # BOARD_NRF52840_PCA10059

6
boards/arm/nrf9160_pca10090/Kconfig
View file

@ -10,9 +10,9 @@ config BOARD_NRF52840_GPIO_RESET
bool "Use nRF52840 PCA10090 GPIO reset pin"
default y if BT_H4
help
Use a GPIO pin to reset the nRF52840 controller and let it wait
until all bytes traveling to the H4 device have been received
and drained, thus ensuring communication can begin correctly.
Use a GPIO pin to reset the nRF52840 controller and let it wait until all
bytes traveling to the H4 device have been received and drained, thus
ensuring communication can begin correctly.
if BOARD_NRF52840_GPIO_RESET

2
drivers/clock_control/Kconfig.stm32
View file

@ -88,8 +88,8 @@ config CLOCK_STM32_MSI_RANGE
choice
prompt "STM32 PLL Clock Source"
depends on CLOCK_STM32_SYSCLK_SRC_PLL
default CLOCK_STM32_PLL_SRC_HSI
depends on CLOCK_STM32_SYSCLK_SRC_PLL
config CLOCK_STM32_PLL_SRC_MSI
bool "MSI"

3
drivers/flash/Kconfig.stm32
View file

@ -30,6 +30,7 @@ config SOC_FLASH_STM32
select FLASH_HAS_PAGE_LAYOUT if SOC_SERIES_STM32WBX
select FLASH_HAS_PAGE_LAYOUT if SOC_SERIES_STM32G4X
help
Enable STM32F0x, STM32F3x, STM32F4x, STM32F7x, STM32L4x, STM32WBx, STM32G0x or STM32G4x series flash driver.
Enable STM32F0x, STM32F3x, STM32F4x, STM32F7x, STM32L4x, STM32WBx,
STM32G0x or STM32G4x series flash driver.
endif

1
drivers/gpio/Kconfig.xec
View file

@ -45,4 +45,3 @@ config GPIO_XEC_GPIO240_276
Enable GPIO 240-276 or what would be equivalent to Port E
endif # GPIO_XEC

1
drivers/net/Kconfig
View file

@ -87,7 +87,6 @@ config SLIP_TAP
help
In TAP the Ethernet frames are transferred over SLIP.
config SLIP_MAC_ADDR
string "MAC address for the interface"
help

1
drivers/pinmux/Kconfig.xec
View file

@ -74,4 +74,3 @@ config PINMUX_XEC_GPIO240_276_NAME
default "port200_276"
endif # PINMUX_XEC

2
drivers/sensor/amg88xx/Kconfig
View file

@ -52,4 +52,4 @@ config AMG88XX_THREAD_STACK_SIZE
help
Stack size of thread used by the driver to handle interrupts.
endif #if AMG88XX
endif # AMG88XX

1
drivers/sensor/mcp9808/Kconfig
View file

@ -18,7 +18,6 @@ config MCP9808_DEV_NAME
string "MCP9808 device name"
default "MCP9808"
config MCP9808_I2C_ADDR
hex "MCP9808 I2C slave address"
default 0x18

4
soc/arm/nordic_nrf/Kconfig.defconfig
View file

@ -9,13 +9,15 @@ if SOC_FAMILY_NRF
source "soc/arm/nordic_nrf/*/Kconfig.defconfig.series"
if SYS_CLOCK_EXISTS
# If the kernel has timer support, enable both clock control and timer
if SYS_CLOCK_EXISTS
config CLOCK_CONTROL
default y
config NRF_RTC_TIMER
default y
endif # SYS_CLOCK_EXISTS
config SYS_CLOCK_HW_CYCLES_PER_SEC

1
soc/arm/st_stm32/stm32g0/Kconfig.soc
View file

@ -13,5 +13,4 @@ depends on SOC_SERIES_STM32G0X
config SOC_STM32G071XX
bool "STM32G071XX"
endchoice

1
subsys/bluetooth/services/Kconfig.dis
View file

@ -142,4 +142,5 @@ config BT_GATT_DIS_SW_REV_STR
depends on BT_GATT_DIS_SW_REV
help
Enable software revision characteristic in Device Information Service.
endif # BT_GATT_DIS

1
subsys/net/l2/canbus/Kconfig
View file

@ -70,6 +70,7 @@ module-dep = NET_LOG
module-str = Log level for CANbus L2 layer
module-help = Enables CANbus L2 to output debug messages.
source "subsys/net/Kconfig.template.log_config.net"
endif # NET_L2_CANBUS
config NET_L2_CANBUS_RAW