patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

dts: Replace status = "ok" with status = "okay"

Browse source 
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.

The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.

The replacement was done with

    git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit is contained in:
Ulf Magnusson 2019-06-14 19:31:16 +02:00 committed by Kumar Gala
parent b28abf9e90
commit a84ded74ea
220 changed files with 969 additions and 969 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

18
boards/arc/arduino_101_sss/arduino_101_sss.dts
View file

@ -39,36 +39,36 @@
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&i2c0 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
};
&i2c2 {
status = "ok";
status = "okay";
};
&i2c3 {
status = "ok";
status = "okay";
};
&adc0 {
status = "ok";
status = "okay";
};
&spi0 {
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
bmi160@1 {
compatible = "bosch,bmi160";
@ -76,6 +76,6 @@
label = "bmi160";
spi-max-frequency = <640000>;
int-gpios = <&gpio1 4 0>;
status = "ok";
status = "okay";
};
};

2
boards/arc/em_starterkit/em_starterkit.dts
View file

@ -37,6 +37,6 @@
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

2
boards/arc/em_starterkit/em_starterkit_em11d.dts
View file

@ -37,6 +37,6 @@
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

6
boards/arc/em_starterkit/em_starterkit_em7d.dts
View file

@ -37,14 +37,14 @@
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&spi0 {
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};

6
boards/arc/em_starterkit/em_starterkit_em7d_v22.dts
View file

@ -37,14 +37,14 @@
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&spi0 {
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};

2
boards/arc/iotdk/iotdk.dts
View file

@ -26,6 +26,6 @@
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

16
boards/arc/quark_se_c1000_ss_devboard/quark_se_c1000_ss_devboard.dts
View file

@ -57,34 +57,34 @@
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&i2c0 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
};
&i2c2 {
status = "ok";
status = "okay";
};
&i2c3 {
status = "ok";
status = "okay";
};
&adc0 {
status = "ok";
status = "okay";
};
&spi0 {
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};

16
boards/arm/96b_argonkey/96b_argonkey.dts
View file

@ -49,15 +49,15 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
/* ST Microelectronics LSM6DSL accel/gyro sensor */
lsm6dsl@1 {
@ -70,7 +70,7 @@
};
&i2s5 {
status = "ok";
status = "okay";
mp34dt05@0 {
compatible = "st,mpxxdtyy";
@ -80,12 +80,12 @@
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
hts221@5f {
@ -109,7 +109,7 @@
};
&i2c3 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
lp3943@60 {
@ -120,5 +120,5 @@
};
&rtc {
status = "ok";
status = "okay";
};

18
boards/arm/96b_carbon/96b_carbon.dts
View file

@ -55,35 +55,35 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart6 {
current-speed = <115200>;
pinctrl-0 = <&usart6_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
status = "ok";
status = "okay";
/* Nordic nRF51822-QFAC */
bt-hci@0 {
@ -97,11 +97,11 @@
};
&spi2 {
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&flash0 {
@ -142,5 +142,5 @@
};
&rtc {
status = "ok";
status = "okay";
};

10
boards/arm/96b_carbon_nrf51/96b_carbon_nrf51.dts
View file

@ -22,29 +22,29 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <28>;
scl-pin = <2>;
};
&uart0 {
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <29>;
rx-pin = <11>;
};
&spi1 {
compatible = "nordic,nrf-spis";
status = "ok";
status = "okay";
sck-pin = <7>;
mosi-pin = <0>;
miso-pin = <30>;

12
boards/arm/96b_neonkey/96b_neonkey.dts
View file

@ -59,21 +59,21 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c3 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_STANDARD>;
lp3943@60 {
@ -84,9 +84,9 @@
};
&spi1 {
status = "ok";
status = "okay";
};
&rtc {
status = "ok";
status = "okay";
};

10
boards/arm/96b_nitrogen/96b_nitrogen.dts
View file

@ -54,17 +54,17 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <13>;
rx-pin = <15>;
rts-pin = <12>;
@ -72,13 +72,13 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <20>;
scl-pin = <22>;
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <26>;
mosi-pin = <23>;
miso-pin = <25>;

32
boards/arm/96b_stm32_sensor_mez/96b_stm32_sensor_mez.dts
View file

@ -51,7 +51,7 @@
};
&i2s2 {
status = "ok";
status = "okay";
mp34dt01@0 {
compatible = "st,mpxxdtyy";
@ -61,7 +61,7 @@
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
/* ST Microelectronics LIS3MDL magnetic field sensor */
@ -80,43 +80,43 @@
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2s2 {
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
};
&timers3 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&timers4 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&timers9 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
@ -124,23 +124,23 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&uart4 {
current-speed = <115200>;
pinctrl-0 = <&uart4_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&rtc {
status = "ok";
status = "okay";
};

6
boards/arm/96b_wistrio/96b_wistrio.dts
View file

@ -39,18 +39,18 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart3 {
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
lis3dh@32 {
compatible = "st,lis3dh";

6
boards/arm/adafruit_feather_m0_basic_proto/adafruit_feather_m0_basic_proto.dts
View file

@ -35,7 +35,7 @@
};
&sercom0 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <3>;
@ -43,7 +43,7 @@
};
&sercom4 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-spi";
#address-cells = <1>;
#size-cells = <0>;
@ -81,5 +81,5 @@
};
&usb0 {
status = "ok";
status = "okay";
};

8
boards/arm/adafruit_trinket_m0/adafruit_trinket_m0.dts
View file

@ -42,7 +42,7 @@
};
&sercom0 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <3>;
@ -50,7 +50,7 @@
};
&sercom2 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <1>;
@ -59,7 +59,7 @@
/* Drives the on-board DotStar LED */
&sercom1 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-spi";
dipo = <2>;
dopo = <0>;
@ -104,5 +104,5 @@
};
&usb0 {
status = "ok";
status = "okay";
};

8
boards/arm/arduino_due/arduino_due.dts
View file

@ -24,19 +24,19 @@
};
&wdog {
status = "ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

8
boards/arm/arduino_zero/arduino_zero.dts
View file

@ -44,7 +44,7 @@
};
&sercom0 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <3>;
@ -52,7 +52,7 @@
};
&sercom5 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <3>;
@ -60,7 +60,7 @@
};
&sercom4 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-spi";
dipo = <0>;
dopo = <1>;
@ -84,5 +84,5 @@
};
&usb0 {
status = "ok";
status = "okay";
};

8
boards/arm/atsamd20_xpro/atsamd20_xpro.dts
View file

@ -41,14 +41,14 @@
};
&sercom0 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-spi";
dipo = <0>;
dopo = <2>;
};
&sercom3 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <3>;
@ -56,7 +56,7 @@
};
&sercom4 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <1>;
@ -81,5 +81,5 @@
};
&rtc {
status = "ok";
status = "okay";
};

10
boards/arm/atsamd21_xpro/atsamd21_xpro.dts
View file

@ -42,7 +42,7 @@
};
&sercom0 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <9600>;
rxpo = <3>;
@ -50,7 +50,7 @@
};
&sercom1 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <3>;
@ -58,7 +58,7 @@
};
&sercom3 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <1>;
@ -66,12 +66,12 @@
};
&sercom5 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-spi";
dipo = <0>;
dopo = <2>;
};
&usb0 {
status = "ok";
status = "okay";
};

10
boards/arm/atsamr21_xpro/atsamr21_xpro.dts
View file

@ -42,7 +42,7 @@
};
&sercom0 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <1>;
@ -50,14 +50,14 @@
};
&sercom1 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-i2c";
clock-frequency = <I2C_BITRATE_FAST>;
label = "I2C_0";
};
&sercom5 {
status = "ok";
status = "okay";
compatible = "atmel,sam0-spi";
dipo = <0>;
dopo = <2>;
@ -65,9 +65,9 @@
};
&usb0 {
status = "ok";
status = "okay";
};
&rtc {
status = "ok";
status = "okay";
};

10
boards/arm/b_l072z_lrwan1/b_l072z_lrwan1.dts
View file

@ -64,25 +64,25 @@ arduino_i2c: &i2c1 {};
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};

8
boards/arm/bbc_microbit/bbc_microbit.dts
View file

@ -42,22 +42,22 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
tx-pin = <24>;
rx-pin = <25>;
};
&i2c0 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <30>;
scl-pin = <0>;

16
boards/arm/bl652_dvk/bl652_dvk.dts
View file

@ -56,19 +56,19 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
compatible = "nordic,nrf-uart";
current-speed = <115200>;
tx-pin = <6>;
@ -78,18 +78,18 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <17>;
};
&spi0 {
status = "ok";
status = "okay";
sck-pin = <25>;
mosi-pin = <23>;
miso-pin = <24>;
@ -97,7 +97,7 @@
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <16>;
mosi-pin = <20>;
miso-pin = <14>;

20
boards/arm/bl654_dvk/bl654_dvk.dts
View file

@ -76,25 +76,25 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&gpio1 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <6>;
rx-pin = <8>;
rts-pin = <5>;
@ -102,18 +102,18 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <13>;
};
&spi0 {
status = "ok";
status = "okay";
sck-pin = <41>;
mosi-pin = <40>;
miso-pin = <4>;
@ -121,7 +121,7 @@
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <19>;
mosi-pin = <20>;
miso-pin = <21>;
@ -180,5 +180,5 @@
&usbd {
compatible = "nordic,nrf-usbd";
status = "ok";
status = "okay";
};

10
boards/arm/cc1352r1_launchxl/cc1352r1_launchxl.dts
View file

@ -54,28 +54,28 @@
};
&trng {
status = "ok";
status = "okay";
};
&gpio0 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
tx-pin = <13>;
rx-pin = <12>;
};
&i2c0 {
status = "ok";
status = "okay";
scl-pin = <4>;
sda-pin = <5>;
};
&spi0 {
status = "ok";
status = "okay";
sck-pin = <10>;
mosi-pin = <9>;
miso-pin = <8>;

6
boards/arm/cc2650_sensortag/cc2650_sensortag.dts
View file

@ -25,15 +25,15 @@
};
&gpioa {
status = "ok";
status = "okay";
};
&trng0 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

10
boards/arm/cc26x2r1_launchxl/cc26x2r1_launchxl.dts
View file

@ -54,28 +54,28 @@
};
&trng {
status = "ok";
status = "okay";
};
&gpio0 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
tx-pin = <3>;
rx-pin = <2>;
};
&i2c0 {
status = "ok";
status = "okay";
scl-pin = <4>;
sda-pin = <5>;
};
&spi0 {
status = "ok";
status = "okay";
sck-pin = <10>;
mosi-pin = <9>;
miso-pin = <8>;

4
boards/arm/cc3220sf_launchxl/cc3220sf_launchxl.dts
View file

@ -59,11 +59,11 @@
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&i2c0 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};

12
boards/arm/colibri_imx7d_m4/colibri_imx7d_m4.dts
View file

@ -48,27 +48,27 @@
};
&uart2 {
status = "ok";
status = "okay";
current-speed = <115200>;
modem-mode = <64>;
};
&gpio1 {
status = "ok";
status = "okay";
};
&gpio2 {
status = "ok";
status = "okay";
};
&i2c4 {
status = "ok";
status = "okay";
};
&pwm1 {
status = "ok";
status = "okay";
};
&mub {
status = "ok";
status = "okay";
};

6
boards/arm/curie_ble/curie_ble.dts
View file

@ -21,16 +21,16 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
current-speed = <1000000>;
status = "ok";
status = "okay";
tx-pin = <9>;
rx-pin = <11>;
rts-pin = <12>;

2
boards/arm/cy8ckit_062_wifi_bt_m0/cy8ckit_062_wifi_bt_m0.dts
View file

@ -25,6 +25,6 @@
};
&uart6 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

2
boards/arm/cy8ckit_062_wifi_bt_m4/cy8ckit_062_wifi_bt_m4.dts
View file

@ -25,6 +25,6 @@
};
&uart5 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

24
boards/arm/disco_l475_iot1/disco_l475_iot1.dts
View file

@ -53,30 +53,30 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&uart4 {
current-speed = <115200>;
pinctrl-0 = <&uart4_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
lis3mdl-magn@1e {
@ -112,11 +112,11 @@
};
&spi1 {
status = "ok";
status = "okay";
};
&spi3 {
status = "ok";
status = "okay";
cs-gpios = <&gpiod 13 0>, <&gpioe 0 0>;
@ -185,21 +185,21 @@
};
&timers2 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};

2
boards/arm/dragino_lsn50/dragino_lsn50.dts
View file

@ -23,6 +23,6 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};

2
boards/arm/efm32hg_slstk3400a/efm32hg_slstk3400a.dts
View file

@ -58,5 +58,5 @@
current-speed = <115200>;
location-rx = <GECKO_LOCATION(4) GECKO_PORT_A GECKO_PIN(0)>;
location-tx = <GECKO_LOCATION(4) GECKO_PORT_F GECKO_PIN(2)>;
status = "ok";
status = "okay";
};

10
boards/arm/efm32pg_stk3402a/efm32pg_stk3402a.dts
View file

@ -57,28 +57,28 @@
current-speed = <115200>;
location-rx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>;
location-tx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>;
status = "ok";
status = "okay";
};
&leuart0 {
current-speed = <9600>;
location-rx = <GECKO_LOCATION(18) GECKO_PORT_D GECKO_PIN(11)>;
location-tx = <GECKO_LOCATION(18) GECKO_PORT_D GECKO_PIN(10)>;
status = "ok";
status = "okay";
};
&i2c0 {
location-sda = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(10)>;
location-scl = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(11)>;
status = "ok";
status = "okay";
};
&rtcc0 {
prescaler = <1>;
status = "ok";
status = "okay";
};
&gpio {
location-swo = <0>;
status = "ok";
status = "okay";
};

2
boards/arm/efm32wg_stk3800/efm32wg_stk3800.dts
View file

@ -57,5 +57,5 @@
current-speed = <115200>;
location-rx = <GECKO_LOCATION(1) GECKO_PORT_E GECKO_PIN(1)>;
location-tx = <GECKO_LOCATION(1) GECKO_PORT_E GECKO_PIN(0)>;
status = "ok";
status = "okay";
};

6
boards/arm/efr32_slwstk6061a/efr32_slwstk6061a.dts
View file

@ -59,17 +59,17 @@
current-speed = <115200>;
location-rx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>;
location-tx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>;
status = "ok";
status = "okay";
};
&rtcc0 {
prescaler = <1>;
status = "ok";
status = "okay";
};
&gpio {
location-swo = <0>;
status = "ok";
status = "okay";
};
&flash0 {

12
boards/arm/efr32mg_sltb004a/efr32mg_sltb004a.dts
View file

@ -56,34 +56,34 @@
current-speed = <115200>;
location-rx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>;
location-tx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>;
status = "ok";
status = "okay";
};
&leuart0 {
current-speed = <9600>;
location-rx = <GECKO_LOCATION(27) GECKO_PORT_F GECKO_PIN(4)>;
location-tx = <GECKO_LOCATION(27) GECKO_PORT_F GECKO_PIN(3)>;
status = "ok";
status = "okay";
};
&i2c0 {
location-sda = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(10)>;
location-scl = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(11)>;
status = "ok";
status = "okay";
};
&i2c1 {
location-sda = <GECKO_LOCATION(17) GECKO_PORT_C GECKO_PIN(4)>;
location-scl = <GECKO_LOCATION(17) GECKO_PORT_C GECKO_PIN(5)>;
status = "ok";
status = "okay";
};
&rtcc0 {
prescaler = <1>;
status = "ok";
status = "okay";
};
&gpio {
location-swo = <0>;
status = "ok";
status = "okay";
};

20
boards/arm/frdm_k64f/frdm_k64f.dts
View file

@ -109,15 +109,15 @@
arduino_serial: &uart3 {};
&adc0 {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
fxos8700@1d {
compatible = "nxp,fxos8700";
@ -129,7 +129,7 @@ arduino_serial: &uart3 {};
};
&spi0 {
status = "ok";
status = "okay";
mcr20a@0 {
compatible = "nxp,mcr20a";
@ -138,22 +138,22 @@ arduino_serial: &uart3 {};
spi-max-frequency = <4000000>;
irqb-gpios = <&gpiob 9 0>;
reset-gpios = <&gpioa 2 0>;
status = "ok";
status = "okay";
};
};
&pwm3 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&usbd {
compatible = "nxp,kinetis-usbd";
status = "ok";
status = "okay";
num-bidir-endpoints = <8>;
};
@ -199,8 +199,8 @@ arduino_serial: &uart3 {};
};
&eth {
status = "ok";
status = "okay";
ptp {
status = "ok";
status = "okay";
};
};

8
boards/arm/frdm_kl25z/frdm_kl25z.dts
View file

@ -62,11 +62,11 @@
};
&adc0 {
status = "ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
mma8451q@1d {
compatible = "nxp,fxos8700","nxp,mma8451q";
reg = <0x1d>;
@ -77,12 +77,12 @@
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&usbd {
compatible = "nxp,kinetis-usbd";
status = "ok";
status = "okay";
num-bidir-endpoints = <8>;
};

6
boards/arm/frdm_kw41z/frdm_kw41z.dts
View file

@ -64,11 +64,11 @@
};
&adc0 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
fxos8700@1f {
compatible = "nxp,fxos8700";
@ -79,6 +79,6 @@
};
&lpuart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

14
boards/arm/hexiwear_k64/hexiwear_k64.dts
View file

@ -80,19 +80,19 @@
};
&adc0 {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};
&pwm3 {
status = "ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
max30101@57 {
compatible = "max,max30101";
@ -102,7 +102,7 @@
};
&i2c1 {
status = "ok";
status = "okay";
fxos8700@1e {
compatible = "nxp,fxos8700";
@ -122,12 +122,12 @@
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&uart4 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

6
boards/arm/hexiwear_kw40z/hexiwear_kw40z.dts
View file

@ -28,14 +28,14 @@
};
&adc0 {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
};
&lpuart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

6
boards/arm/holyiot_yj16019/holyiot_yj16019.dts
View file

@ -42,15 +42,15 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <29>;
};

2
boards/arm/lpcxpresso54114/lpcxpresso54114_m0.dts
View file

@ -22,5 +22,5 @@
};
&mailbox0 {
status = "ok";
status = "okay";
};

10
boards/arm/lpcxpresso54114/lpcxpresso54114_m4.dts
View file

@ -44,22 +44,22 @@
};
&usart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&mailbox0 {
status = "ok";
status = "okay";
};
&red_led {
status = "ok";
status = "okay";
};
&green_led {
status = "ok";
status = "okay";
};
&blue_led {
status = "ok";
status = "okay";
};

12
boards/arm/lpcxpresso55s69/lpcxpresso55s69_cpu0.dts
View file

@ -44,26 +44,26 @@
};
&usart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&gpio0 {
status = "ok";
status = "okay";
};
&gpio1 {
status = "ok";
status = "okay";
};
&green_led {
status = "ok";
status = "okay";
};
&blue_led {
status = "ok";
status = "okay";
};
&red_led {
status = "ok";
status = "okay";
};

8
boards/arm/mec15xxevb_assy6853/mec15xxevb_assy6853.dts
View file

@ -20,21 +20,21 @@
};
&uart2 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&i2c0 {
status = "ok";
status = "okay";
port_sel = <0>;
};
&i2c1 {
status = "ok";
status = "okay";
port_sel = <1>;
};
&i2c2 {
status = "ok";
status = "okay";
port_sel = <7>;
};

2
boards/arm/mec2016evb_assy6797/mec2016evb_assy6797.dts
View file

@ -20,6 +20,6 @@
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

12
boards/arm/mikroe_mini_m4_for_stm32/mikroe_mini_m4_for_stm32.dts
View file

@ -41,25 +41,25 @@
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&i2c2 {
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};
&timers3 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&usbotg_fs {
status = "ok";
status = "okay";
};

6
boards/arm/mimxrt1015_evk/mimxrt1015_evk.dts
View file

@ -54,15 +54,15 @@ arduino_serial: &uart4 {};
at25sf128a: at25sf128a@0 {
compatible = "adesto,at25sf128a", "jedec,spi-nor";
reg = <0>;
status = "ok";
status = "okay";
};
};
&i2c1 {
status = "ok";
status = "okay";
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

12
boards/arm/mimxrt1020_evk/mimxrt1020_evk.dts
View file

@ -62,26 +62,26 @@ arduino_serial: &uart2 {};
is25wp064: is25wp064@0 {
compatible = "issi,is25wp064", "jedec,spi-nor";
reg = <0>;
status = "ok";
status = "okay";
};
};
&i2c1 {
status = "ok";
status = "okay";
};
&i2c4 {
status = "ok";
status = "okay";
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&eth {
status = "ok";
status = "okay";
ptp {
status = "ok";
status = "okay";
};
};

16
boards/arm/mimxrt1050_evk/mimxrt1050_evk.dts
View file

@ -72,12 +72,12 @@ arduino_serial: &uart3 {};
hyperflash0: hyperflash@0 {
compatible = "cypress,s26ks512s";
reg = <0>;
status = "ok";
status = "okay";
};
};
&lcdif1 {
status = "ok";
status = "okay";
port {
lcd_panel_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
@ -86,7 +86,7 @@ arduino_serial: &uart3 {};
};
&i2c1 {
status = "ok";
status = "okay";
fxos8700@1f {
compatible = "nxp,fxos8700";
@ -104,21 +104,21 @@ arduino_serial: &uart3 {};
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&spi3 {
status = "ok";
status = "okay";
};
&eth {
status = "ok";
status = "okay";
ptp {
status = "ok";
status = "okay";
};
};
&usbd1 {
status = "ok";
status = "okay";
};

2
boards/arm/mimxrt1050_evk/mimxrt1050_evk_qspi.dts
View file

@ -13,6 +13,6 @@
is25wp064: is25wp064@0 {
compatible = "issi,is25wp064", "jedec,spi-nor";
reg = <0>;
status = "ok";
status = "okay";
};
};

8
boards/arm/mimxrt1060_evk/mimxrt1060_evk.dts
View file

@ -68,12 +68,12 @@ arduino_serial: &uart3 {};
is25wp064: is25wp064@0 {
compatible = "issi,is25wp064", "jedec,spi-nor";
reg = <0>;
status = "ok";
status = "okay";
};
};
&lcdif1 {
status = "ok";
status = "okay";
port {
lcd_panel_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
@ -82,10 +82,10 @@ arduino_serial: &uart3 {};
};
&i2c1 {
status = "ok";
status = "okay";
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

2
boards/arm/mimxrt1060_evk/mimxrt1060_evk_hyperflash.dts
View file

@ -12,6 +12,6 @@
hyperflash0: hyperflash@0 {
compatible = "cypress,s26ks512s";
reg = <0>;
status = "ok";
status = "okay";
};
};

10
boards/arm/mimxrt1064_evk/mimxrt1064_evk.dts
View file

@ -65,7 +65,7 @@
arduino_i2c: &i2c1 {};
&lcdif1 {
status = "ok";
status = "okay";
port {
lcd_panel_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
@ -74,17 +74,17 @@ arduino_i2c: &i2c1 {};
};
&i2c1 {
status = "ok";
status = "okay";
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
};
&eth {
status = "ok";
status = "okay";
ptp {
status = "ok";
status = "okay";
};
};

2
boards/arm/msp_exp432p401r_launchxl/msp_exp432p401r_launchxl.dts
View file

@ -22,7 +22,7 @@
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
};

10
boards/arm/nrf51_ble400/nrf51_ble400.dts
View file

@ -75,22 +75,22 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <0>;
scl-pin = <1>;
/* smba-pin = <2>; */
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <25>;
mosi-pin = <24>;
miso-pin = <23>;
@ -99,7 +99,7 @@
&uart0 {
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <9>;
rx-pin = <11>;
rts-pin = <8>;

6
boards/arm/nrf51_blenano/nrf51_blenano.dts
View file

@ -34,16 +34,16 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <9>;
rx-pin = <11>;
rts-pin = <8>;

16
boards/arm/nrf51_pca10028/nrf51_pca10028.dts
View file

@ -76,20 +76,20 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&adc {
status ="ok";
status = "okay";
};
&uart0 {
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <9>;
rx-pin = <11>;
rts-pin = <8>;
@ -97,28 +97,28 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <30>;
scl-pin = <7>;
};
&i2c1 {
/* Cannot be used together with spi1. */
/* status = "ok"; */
/* status = "okay"; */
sda-pin = <5>;
scl-pin = <6>;
};
&spi0 {
/* Cannot be used together with i2c0. */
/* status = "ok"; */
/* status = "okay"; */
sck-pin = <7>;
mosi-pin = <29>;
miso-pin = <30>;
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <6>;
mosi-pin = <5>;
miso-pin = <4>;

8
boards/arm/nrf51_vbluno51/nrf51_vbluno51.dts
View file

@ -47,16 +47,16 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <10>;
rx-pin = <11>;
rts-pin = <12>;
@ -64,7 +64,7 @@
};
&i2c0 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <29>;
scl-pin = <30>;

12
boards/arm/nrf52810_pca10040/nrf52810_pca10040.dts
View file

@ -78,20 +78,20 @@
};
&adc {
status = "ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uarte";
status = "ok";
status = "okay";
current-speed = <115200>;
tx-pin = <6>;
rx-pin = <8>;
@ -100,13 +100,13 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&spi0 {
status = "ok";
status = "okay";
sck-pin = <29>;
mosi-pin = <31>;
miso-pin = <30>;

14
boards/arm/nrf52811_pca10056/nrf52811_pca10056.dts
View file

@ -76,21 +76,21 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <6>;
rx-pin = <8>;
rts-pin = <5>;
@ -99,19 +99,19 @@
&i2c0 {
/* Arduino compatible PINs */
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <13>;
ch0-inverted;
};
&spi0 {
status = "ok";
status = "okay";
sck-pin = <0>;
mosi-pin = <1>;
miso-pin = <9>;

12
boards/arm/nrf52832_mdk/nrf52832_mdk.dts
View file

@ -61,15 +61,15 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
compatible = "nordic,nrf-uart";
current-speed = <115200>;
tx-pin = <20>;
@ -79,19 +79,19 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&i2c1 {
status = "ok";
status = "okay";
sda-pin = <30>;
scl-pin = <31>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <22>;
ch0-inverted;
};

24
boards/arm/nrf52840_blip/nrf52840_blip.dts
View file

@ -58,25 +58,25 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&gpio1 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <6>;
rx-pin = <8>;
rts-pin = <5>;
@ -84,42 +84,42 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <12>;
scl-pin = <11>;
};
&i2c1 {
/* Cannot be used together with spi1. */
/* status = "ok"; */
/* status = "okay"; */
sda-pin = <2>;
scl-pin = <3>;
};
&spi0 {
/* Cannot be used together with i2c0. */
/* status = "ok"; */
/* status = "okay"; */
sck-pin = <19>;
mosi-pin = <20>;
miso-pin = <21>;
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <25>;
mosi-pin = <34>;
miso-pin = <24>;
};
&spi2 {
status = "ok";
status = "okay";
sck-pin = <26>;
mosi-pin = <23>;
miso-pin = <27>;
};
&spi3 {
status = "ok";
status = "okay";
sck-pin = <29>;
mosi-pin = <30>;
miso-pin = <31>;
@ -167,5 +167,5 @@
&usbd {
compatible = "nordic,nrf-usbd";
status = "ok";
status = "okay";
};

16
boards/arm/nrf52840_mdk/nrf52840_mdk.dts
View file

@ -59,21 +59,21 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&gpio1 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <20>;
rx-pin = <19>;
rts-pin = <5>;
@ -81,19 +81,19 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&i2c1 {
status = "ok";
status = "okay";
sda-pin = <30>;
scl-pin = <31>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <22>;
ch0-inverted;
};
@ -140,5 +140,5 @@
&usbd {
compatible = "nordic,nrf-usbd";
status = "ok";
status = "okay";
};

18
boards/arm/nrf52840_papyr/nrf52840_papyr.dts
View file

@ -55,44 +55,44 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&gpio1 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <8>;
rx-pin = <7>;
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <5>;
scl-pin = <6>;
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <31>;
mosi-pin = <29>;
miso-pin = <33>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <13>;
ch0-inverted;
};
@ -139,5 +139,5 @@
&usbd {
compatible = "nordic,nrf-usbd";
status = "ok";
status = "okay";
};

2
boards/arm/nrf52840_pca10056/doc/index.rst
View file

@ -180,7 +180,7 @@ more than one UART for connecting peripheral devices:
&uart1 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <14>;
rx-pin = <16>;
};

26
boards/arm/nrf52840_pca10056/nrf52840_pca10056.dts
View file

@ -103,25 +103,25 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&gpio1 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <6>;
rx-pin = <8>;
rts-pin = <5>;
@ -129,41 +129,41 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&i2c1 {
/* Cannot be used together with spi1. */
/* status = "ok"; */
/* status = "okay"; */
sda-pin = <30>;
scl-pin = <31>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <13>;
ch0-inverted;
};
&spi0 {
/* Cannot be used together with i2c0. */
/* status = "ok"; */
/* status = "okay"; */
sck-pin = <27>;
mosi-pin = <26>;
miso-pin = <29>;
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <31>;
mosi-pin = <30>;
miso-pin = <40>;
};
&spi2 {
status = "ok";
status = "okay";
sck-pin = <19>;
mosi-pin = <20>;
miso-pin = <21>;
@ -181,7 +181,7 @@
};
&spi3 {
status = "ok";
status = "okay";
sck-pin = <41>;
mosi-pin = <42>;
miso-pin = <43>;
@ -229,5 +229,5 @@
&usbd {
compatible = "nordic,nrf-usbd";
status = "ok";
status = "okay";
};

18
boards/arm/nrf52840_pca10059/nrf52840_pca10059.dts
View file

@ -66,21 +66,21 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&gpio1 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uarte";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <20>;
rx-pin = <24>;
rts-pin = <17>;
@ -88,14 +88,14 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&i2c1 {
/* Cannot be used together with spi1. */
/* status = "ok"; */
/* status = "okay"; */
sda-pin = <30>;
scl-pin = <31>;
};
@ -106,14 +106,14 @@
*/
&spi0 {
/* Cannot be used together with i2c0. */
/* status = "ok"; */
/* status = "okay"; */
sck-pin = <27>;
mosi-pin = <26>;
miso-pin = <42>;
};
&spi1 {
status = "ok";
status = "okay";
sck-pin = <31>;
mosi-pin = <30>;
miso-pin = <45>;
@ -128,5 +128,5 @@
&usbd {
compatible = "nordic,nrf-usbd";
status = "ok";
status = "okay";
};

8
boards/arm/nrf52840_pca10090/nrf52840_pca10090.dts
View file

@ -24,15 +24,15 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&gpio1 {
status ="ok";
status = "okay";
};
/* The nRF52840 SoC does not have any connection to the any of the LEDs,
@ -42,7 +42,7 @@
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <5>;
rx-pin = <3>;
rts-pin = <40>;

6
boards/arm/nrf52_adafruit_feather/nrf52_adafruit_feather.dts
View file

@ -53,17 +53,17 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <6>;
rx-pin = <8>;
};

8
boards/arm/nrf52_blenano2/nrf52_blenano2.dts
View file

@ -36,17 +36,17 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <29>;
rx-pin = <30>;
rts-pin = <2>;
@ -54,7 +54,7 @@
};
&i2c0 {
status = "ok";
status = "okay";
sda-pin = <28>;
scl-pin = <2>;
};

20
boards/arm/nrf52_pca10040/nrf52_pca10040.dts
View file

@ -77,19 +77,19 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
arduino_serial: &uart0 {
status = "ok";
status = "okay";
compatible = "nordic,nrf-uart";
current-speed = <115200>;
tx-pin = <6>;
@ -99,41 +99,41 @@ arduino_serial: &uart0 {
};
arduino_i2c: &i2c0 {
status = "ok";
status = "okay";
sda-pin = <26>;
scl-pin = <27>;
};
&i2c1 {
/* Cannot be used together with spi1. */
/* status = "ok"; */
/* status = "okay"; */
sda-pin = <30>;
scl-pin = <31>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <17>;
ch0-inverted;
};
&spi0 {
/* Cannot be used together with i2c0. */
/* status = "ok"; */
/* status = "okay"; */
sck-pin = <27>;
mosi-pin = <26>;
miso-pin = <25>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
sck-pin = <31>;
mosi-pin = <30>;
miso-pin = <29>;
};
&spi2 {
status = "ok";
status = "okay";
sck-pin = <22>;
mosi-pin = <23>;
miso-pin = <24>;

12
boards/arm/nrf52_pca20020/nrf52_pca20020.dts
View file

@ -57,19 +57,19 @@
};
&adc {
status = "ok";
status = "okay";
};
&gpiote {
status = "ok";
status = "okay";
};
&gpio0 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
compatible = "nordic,nrf-uart";
current-speed = <115200>;
tx-pin = <3>;
@ -77,7 +77,7 @@
};
&i2c0 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <7>;
scl-pin = <8>;
@ -111,7 +111,7 @@
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <14>;
scl-pin = <15>;

6
boards/arm/nrf52_sparkfun/nrf52_sparkfun.dts
View file

@ -47,17 +47,17 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
status = "okay";
tx-pin = <27>;
rx-pin = <26>;
};

8
boards/arm/nrf52_vbluno52/nrf52_vbluno52.dts
View file

@ -46,15 +46,15 @@
};
&gpiote {
status ="ok";
status = "okay";
};
&gpio0 {
status ="ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
compatible = "nordic,nrf-uart";
current-speed = <115200>;
tx-pin = <6>;
@ -64,7 +64,7 @@
};
&i2c0 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <26>;
scl-pin = <27>;

22
boards/arm/nrf9160_pca10090/nrf9160_pca10090_common.dts
View file

@ -69,19 +69,19 @@
};
&adc {
status ="ok";
status = "okay";
};
&gpiote {
status = "ok";
status = "okay";
};
&gpio0 {
status = "ok";
status = "okay";
};
&uart0 {
status = "ok";
status = "okay";
current-speed = <115200>;
tx-pin = <29>;
rx-pin = <28>;
@ -90,7 +90,7 @@
};
&uart1 {
status = "ok";
status = "okay";
current-speed = <115200>;
tx-pin = <1>;
rx-pin = <0>;
@ -99,33 +99,33 @@
};
&i2c2 {
status = "ok";
status = "okay";
sda-pin = <30>;
scl-pin = <31>;
};
&pwm0 {
status = "ok";
status = "okay";
ch0-pin = <2>;
};
&spi3 {
status = "ok";
status = "okay";
sck-pin = <19>;
mosi-pin = <18>;
miso-pin = <17>;
};
&timer0 {
status = "ok";
status = "okay";
};
&timer1 {
status = "ok";
status = "okay";
};
&timer2 {
status = "ok";
status = "okay";
};
&flash0 {

14
boards/arm/nucleo_f030r8/nucleo_f030r8.dts
View file

@ -44,35 +44,35 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};

14
boards/arm/nucleo_f070rb/nucleo_f070rb.dts
View file

@ -44,35 +44,35 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};

14
boards/arm/nucleo_f091rc/nucleo_f091rc.dts
View file

@ -50,30 +50,30 @@
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};
&flash0 {
@ -95,5 +95,5 @@ arduino_spi: &spi1 {
};
&adc1 {
status = "ok";
status = "okay";
};

14
boards/arm/nucleo_f103rb/nucleo_f103rb.dts
View file

@ -50,7 +50,7 @@
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart3 {
@ -60,25 +60,25 @@
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
};
&timers1 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&iwdg {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};

10
boards/arm/nucleo_f207zg/nucleo_f207zg.dts
View file

@ -56,23 +56,23 @@ arduino_serial: &usart6 {};
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart6 {
current-speed = <115200>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};

18
boards/arm/nucleo_f302r8/nucleo_f302r8.dts
View file

@ -44,45 +44,45 @@ arduino_i2c: &i2c1 {};
arduino_spi: &spi2 {};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi2 {
status = "ok";
status = "okay";
};
&usart1 {
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart3 {
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&timers2 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};

16
boards/arm/nucleo_f334r8/nucleo_f334r8.dts
View file

@ -44,14 +44,14 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart3 {
@ -61,28 +61,28 @@
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&timers1 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};
&flash0 {

18
boards/arm/nucleo_f401re/nucleo_f401re.dts
View file

@ -45,27 +45,27 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&spi2 {
status = "ok";
status = "okay";
};
&flash0 {
@ -107,17 +107,17 @@ arduino_spi: &spi1 {
};
&timers2 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};

10
boards/arm/nucleo_f411re/nucleo_f411re.dts
View file

@ -44,18 +44,18 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
@ -68,9 +68,9 @@ arduino_i2c: &i2c1 {
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&rtc {
status = "ok";
status = "okay";
};

16
boards/arm/nucleo_f412zg/nucleo_f412zg.dts
View file

@ -58,37 +58,37 @@ arduino_serial: &usart6 {};
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart6 {
current-speed = <115200>;
pinctrl-0 = <&usart6_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&timers2 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};

16
boards/arm/nucleo_f413zh/nucleo_f413zh.dts
View file

@ -58,37 +58,37 @@ arduino_serial: &usart6 {};
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart6 {
current-speed = <115200>;
pinctrl-0 = <&usart6_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&timers2 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};

18
boards/arm/nucleo_f429zi/nucleo_f429zi.dts
View file

@ -57,45 +57,45 @@ arduino_spi: &spi1 {};
arduino_serial: &usart6 {};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
status = "ok";
status = "okay";
};
&usart3 {
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart6 {
current-speed = <115200>;
pinctrl-0 = <&usart6_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&timers1 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};
&flash0 {

14
boards/arm/nucleo_f446re/nucleo_f446re.dts
View file

@ -44,35 +44,35 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c3 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&rtc {
status = "ok";
status = "okay";
};

22
boards/arm/nucleo_f746zg/nucleo_f746zg.dts
View file

@ -58,30 +58,30 @@ arduino_spi: &spi1 {};
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart6 {
current-speed = <115200>;
pinctrl-0 = <&usart6_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&timers1 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
@ -90,15 +90,15 @@ arduino_spi: &spi1 {};
* WARNING: The pin PA7 will conflict on selection of SPI_1 and
* ETH_STM32_HAL. See pinmux.c for further details.
*/
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};
&rtc {
status = "ok";
status = "okay";
};
&can1 {
@ -106,9 +106,9 @@ arduino_spi: &spi1 {};
sjw = <1>;
prop_seg_phase_seg1 = <6>;
phase_seg2 = <5>;
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};

16
boards/arm/nucleo_f756zg/nucleo_f756zg.dts
View file

@ -58,37 +58,37 @@ arduino_spi: &spi1 {};
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart3 {
current-speed = <115200>;
pinctrl-0 = <&usart3_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart6 {
current-speed = <115200>;
pinctrl-0 = <&usart6_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usbotg_fs {
status = "ok";
status = "okay";
};
&i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&timers1 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
@ -97,5 +97,5 @@ arduino_spi: &spi1 {};
* WARNING: The pin PA7 will conflict on selection of SPI_1 and
* ETH_STM32_HAL. See pinmux.c for further details.
*/
status = "ok";
status = "okay";
};

6
boards/arm/nucleo_l053r8/nucleo_l053r8.dts
View file

@ -50,14 +50,14 @@
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};

10
boards/arm/nucleo_l073rz/nucleo_l073rz.dts
View file

@ -50,22 +50,22 @@
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
arduino_spi: &spi1 {
status = "ok";
status = "okay";
};
&iwdg {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};

12
boards/arm/nucleo_l432kc/nucleo_l432kc.dts
View file

@ -41,18 +41,18 @@
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&spi1 {
status = "ok";
status = "okay";
};
&timers2 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
@ -60,11 +60,11 @@
pinctrl-0 = <&can_pins_a>;
pinctrl-names = "default";
bus-speed = <125000>;
status = "ok";
status = "okay";
};
&rtc {
status = "ok";
status = "okay";
};
&flash0 {

18
boards/arm/nucleo_l476rg/nucleo_l476rg.dts
View file

@ -44,42 +44,42 @@
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
&usart2 {
current-speed = <115200>;
pinctrl-0 = <&usart2_pins_a>;
pinctrl-names = "default";
status = "ok";
status = "okay";
};
arduino_i2c: &i2c1 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c3 {
status = "ok";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
status = "ok";
status = "okay";
};
&timers2 {
status = "ok";
status = "okay";
pwm {
status = "ok";
status = "okay";
};
};
&rtc {
status = "ok";
status = "okay";
};
&adc1 {
status = "ok";
status = "okay";
};

Some files were not shown because too many files have changed in this diff Show more