patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

drivers: serial: correct spelling

Browse source 
Employ a code spell checking tool to scan and correct spelling errors
in all files within the drivers/serial directory.

Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This commit is contained in:
Pisit Sawangvonganan 2024-01-13 00:34:18 +07:00 committed by Fabio Baltieri
parent 6a50bbdb3a
commit b4567fa551
8 changed files with 11 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
drivers/serial/Kconfig.emul
View file

@ -20,7 +20,7 @@ config UART_EMUL_WORK_Q_STACK_SIZE
default 2048 default 2048
config UART_EMUL_WORK_Q_PRIORITY config UART_EMUL_WORK_Q_PRIORITY
int "UART emulator work queue tread priority" int "UART emulator work queue thread priority"
default 1 default 1
endif # UART_EMUL endif # UART_EMUL

2
drivers/serial/uart_cdns.h
View file

@ -122,7 +122,7 @@ struct uart_cdns_regs {
volatile uint32_t flow_ctrl_delay; /* Flow Control Delay Register */ volatile uint32_t flow_ctrl_delay; /* Flow Control Delay Register */
volatile uint32_t rpwr; /* IR Minimum Received Pulse Register */ volatile uint32_t rpwr; /* IR Minimum Received Pulse Register */
volatile uint32_t tpwr; /* IR TRansmitted Pulse Width Register */ volatile uint32_t tpwr; /* IR TRansmitted Pulse Width Register */
volatile uint32_t tx_fifo_trigger_level; /* Transmiter FIFO trigger level */ volatile uint32_t tx_fifo_trigger_level; /* Transmitter FIFO trigger level */
volatile uint32_t rbrs; /* RX FIFO Byte Status Register */ volatile uint32_t rbrs; /* RX FIFO Byte Status Register */
}; };

4
drivers/serial/uart_esp32.c
View file

@ -603,7 +603,7 @@ static int uart_esp32_async_tx_abort(const struct device *dev)
err = dma_stop(config->dma_dev, config->tx_dma_channel); err = dma_stop(config->dma_dev, config->tx_dma_channel);
if (err) { if (err) {
LOG_ERR("Error stoping Tx DMA (%d)", err); LOG_ERR("Error stopping Tx DMA (%d)", err);
goto unlock; goto unlock;
} }
@ -838,7 +838,7 @@ static int uart_esp32_async_rx_disable(const struct device *dev)
err = dma_stop(config->dma_dev, config->rx_dma_channel); err = dma_stop(config->dma_dev, config->rx_dma_channel);
if (err) { if (err) {
LOG_ERR("Error stoping Rx DMA (%d)", err); LOG_ERR("Error stopping Rx DMA (%d)", err);
goto unlock; goto unlock;
} }

2
drivers/serial/uart_hostlink.c
View file

@ -254,7 +254,7 @@ static void hl_static_send(size_t payload_used)
* It is responsibility of debugger to set this back to HL_NOADDRESS * It is responsibility of debugger to set this back to HL_NOADDRESS
* after receiving the packet. * after receiving the packet.
* Please note that we don't wait here because some implementations * Please note that we don't wait here because some implementations
* use hl_blockedPeek() function as a signal that we send a messege. * use hl_blockedPeek() function as a signal that we send a message.
*/ */
hl_write32(&__HOSTLINK__.hdr.target2host_addr, buf_addr); hl_write32(&__HOSTLINK__.hdr.target2host_addr, buf_addr);

2
drivers/serial/uart_rzt2m.c
View file

@ -376,7 +376,7 @@ static int rzt2m_uart_init(const struct device *dev)
config->irq_config_func(dev); config->irq_config_func(dev);
#endif /* CONFIG_UART_INTERRUPT_DRIVEN */ #endif /* CONFIG_UART_INTERRUPT_DRIVEN */
/* Start trasmitter and receiver. */ /* Start transmitter and receiver. */
*CCR0(config->base) |= (CCR0_MASK_TE | CCR0_MASK_RE); *CCR0(config->base) |= (CCR0_MASK_TE | CCR0_MASK_RE);
while (!(*CCR0(config->base) & CCR0_MASK_RE)) { while (!(*CCR0(config->base) & CCR0_MASK_RE)) {
} }

2
drivers/serial/uart_sedi.c
View file

@ -92,7 +92,7 @@ struct uart_sedi_config_info {
/* Specifies the baudrate for the uart instance. */ /* Specifies the baudrate for the uart instance. */
uint32_t baud_rate; uint32_t baud_rate;
/* Specifies the port line contorl settings */ /* Specifies the port line control settings */
sedi_uart_lc_t line_ctrl; sedi_uart_lc_t line_ctrl;
struct k_mutex *mutex; struct k_mutex *mutex;

4
drivers/serial/uart_stm32.c
View file

@ -567,7 +567,7 @@ static int uart_stm32_configure(const struct device *dev,
LL_USART_Disable(config->usart); LL_USART_Disable(config->usart);
/* Set basic parmeters, such as data-/stop-bit, parity, and baudrate */ /* Set basic parameters, such as data-/stop-bit, parity, and baudrate */
uart_stm32_parameters_set(dev, cfg); uart_stm32_parameters_set(dev, cfg);
LL_USART_Enable(config->usart); LL_USART_Enable(config->usart);
@ -1913,7 +1913,7 @@ static int uart_stm32_registers_configure(const struct device *dev)
LL_USART_SetTransferDirection(config->usart, LL_USART_SetTransferDirection(config->usart,
LL_USART_DIRECTION_TX_RX); LL_USART_DIRECTION_TX_RX);
/* Set basic parmeters, such as data-/stop-bit, parity, and baudrate */ /* Set basic parameters, such as data-/stop-bit, parity, and baudrate */
uart_stm32_parameters_set(dev, uart_cfg); uart_stm32_parameters_set(dev, uart_cfg);
/* Enable the single wire / half-duplex mode */ /* Enable the single wire / half-duplex mode */