patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 7 Packages Projects Releases Wiki Activity

drivers: lora: sx127x: use spi_dt_spec

Browse source 
Simplify driver implementation by using spi_dt_spec.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit is contained in:
Gerard Marull-Paretas 2022-01-28 23:32:54 +01:00 committed by Anas Nashif
parent 4bcbbe571e
commit dc2c889948
1 changed files with 13 additions and 33 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

46
drivers/lora/sx127x.c
View file

@ -98,8 +98,6 @@ BUILD_ASSERT(DT_NUM_INST_STATUS_OKAY(semtech_sx1272) +
"Multiple SX127x instances in DT");
#define GPIO_RESET_PIN DT_INST_GPIO_PIN(0, reset_gpios)
#define GPIO_CS_PIN DT_INST_SPI_DEV_CS_GPIOS_PIN(0)
#define GPIO_CS_FLAGS DT_INST_SPI_DEV_CS_GPIOS_FLAGS(0)
#define GPIO_ANTENNA_ENABLE_PIN \
DT_INST_GPIO_PIN(0, antenna_enable_gpios)
@ -179,6 +177,14 @@ static const struct sx127x_dio sx127x_dios[] = { SX127X_DIO_GPIO_INIT(0) };
#define SX127X_MAX_DIO ARRAY_SIZE(sx127x_dios)
struct sx127x_config {
struct spi_dt_spec bus;
};
static const struct sx127x_config dev_config = {
.bus = SPI_DT_SPEC_INST_GET(0, SPI_WORD_SET(8) | SPI_TRANSFER_MSB, 0),
};
static struct sx127x_data {
const struct device *reset;
#if DT_INST_NODE_HAS_PROP(0, antenna_enable_gpios)
@ -201,8 +207,6 @@ static struct sx127x_data {
const struct device *tcxo_power;
bool tcxo_power_enabled;
#endif
const struct device *spi;
struct spi_config spi_cfg;
const struct device *dio_dev[SX127X_MAX_DIO];
struct k_work dio_work[SX127X_MAX_DIO];
} dev_data;
@ -416,10 +420,10 @@ static int sx127x_transceive(uint8_t reg, bool write, void *data, size_t length)
.count = ARRAY_SIZE(buf)
};
return spi_transceive(dev_data.spi, &dev_data.spi_cfg, &tx, &rx);
return spi_transceive_dt(&dev_config.bus, &tx, &rx);
}
return spi_write(dev_data.spi, &dev_data.spi_cfg, &tx);
return spi_write_dt(&dev_config.bus, &tx);
}
int sx127x_read(uint8_t reg_addr, uint8_t *data, uint8_t len)
@ -585,38 +589,14 @@ static int sx127x_antenna_configure(void)
static int sx127x_lora_init(const struct device *dev)
{
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
static struct spi_cs_control spi_cs;
#endif
int ret;
uint8_t regval;
dev_data.spi = device_get_binding(DT_INST_BUS_LABEL(0));
if (!dev_data.spi) {
LOG_ERR("Cannot get pointer to %s device",
DT_INST_BUS_LABEL(0));
return -EINVAL;
if (!spi_is_ready(&dev_config.bus)) {
LOG_ERR("SPI device not ready");
return -ENODEV;
}
dev_data.spi_cfg.operation = SPI_WORD_SET(8) | SPI_TRANSFER_MSB;
dev_data.spi_cfg.frequency = DT_INST_PROP(0, spi_max_frequency);
dev_data.spi_cfg.slave = DT_INST_REG_ADDR(0);
#if DT_INST_SPI_DEV_HAS_CS_GPIOS(0)
spi_cs.gpio_dev = device_get_binding(DT_INST_SPI_DEV_CS_GPIOS_LABEL(0));
if (!spi_cs.gpio_dev) {
LOG_ERR("Cannot get pointer to %s device",
DT_INST_SPI_DEV_CS_GPIOS_LABEL(0));
return -EIO;
}
spi_cs.gpio_pin = GPIO_CS_PIN;
spi_cs.gpio_dt_flags = GPIO_CS_FLAGS;
spi_cs.delay = 0U;
dev_data.spi_cfg.cs = &spi_cs;
#endif
ret = sx12xx_configure_pin(tcxo_power, GPIO_OUTPUT_INACTIVE);
if (ret) {
return ret;