patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity

riscv: Disable IRQ_VECTOR_TABLE_JUMP_BY_CODE for CLIC

Browse source 
Quoting from the SiFive Interrupt Cookbook [0]

  CLIC vectored mode has a similar concept to CLINT vectored mode, where
  an interrupt vector table is used for specific interrupts. However, in
  CLIC vectored mode, the handler table contains the address of the
  interrupt handler instead of an opcode containing a jump instruction.
  When an interrupt occurs in CLIC vectored mode, the address of the
  handler entry from the vector table is loaded and then jumped to in
  hardware

So, when CLIC is present we must use IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS
instead of IRQ_VECTOR_TABLE_JUMP_BY_CODE.

[0] https://starfivetech.com/uploads/sifive-interrupt-cookbook-v1p2.pdf

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This commit is contained in:
Carlo Caione 2022-07-11 17:54:11 +02:00 committed by Carles Cufí
parent 850cdc9196
commit dd0bf0e59a
1 changed files with 1 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
arch/Kconfig
View file

@ -421,7 +421,7 @@ config ARCH_IRQ_VECTOR_TABLE_ALIGN
choice IRQ_VECTOR_TABLE_TYPE
prompt "IRQ vector table type"
depends on GEN_IRQ_VECTOR_TABLE
default IRQ_VECTOR_TABLE_JUMP_BY_CODE if RISCV
default IRQ_VECTOR_TABLE_JUMP_BY_CODE if (RISCV && !RISCV_HAS_CLIC)
default IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS
config IRQ_VECTOR_TABLE_JUMP_BY_ADDRESS