diff --git a/boards/nxp/lpcxpresso11u68/doc/index.rst b/boards/nxp/lpcxpresso11u68/doc/index.rst index 23198a359e..244fb7427b 100644 --- a/boards/nxp/lpcxpresso11u68/doc/index.rst +++ b/boards/nxp/lpcxpresso11u68/doc/index.rst @@ -109,7 +109,7 @@ probe (based on a NXP LPC43xx MCU). This MCU provides either a CMSIS-DAP or a J-Link interface. It depends on the embedded firmware image. The default OpenOCD configuration supports the CMSIS-DAP interface. If you want to switch to J-Link, then you need to edit the -``boards/arm/lpcxpresso11u68/support/openocd.cfg`` file and to replace:: +:zephyr_file:`boards/nxp/lpcxpresso11u68/support/openocd.cfg` file and to replace:: source [find interface/cmsis-dap.cfg] diff --git a/boards/nxp/lpcxpresso55s28/doc/index.rst b/boards/nxp/lpcxpresso55s28/doc/index.rst index 7750254d42..1e97071456 100644 --- a/boards/nxp/lpcxpresso55s28/doc/index.rst +++ b/boards/nxp/lpcxpresso55s28/doc/index.rst @@ -88,7 +88,7 @@ already supported, which can also be re-used on this lpcxpresso55s28 board: Other hardware features are not currently enabled. The default configuration file -``boards/arm/lpcxpresso55s28/lpcxpresso55s28_defconfig`` +:zephyr_file:`boards/nxp/lpcxpresso55s28/lpcxpresso55s28_defconfig` Connections and IOs =================== diff --git a/boards/nxp/lpcxpresso55s69/doc/index.rst b/boards/nxp/lpcxpresso55s69/doc/index.rst index c156de1efa..1d909d1894 100644 --- a/boards/nxp/lpcxpresso55s69/doc/index.rst +++ b/boards/nxp/lpcxpresso55s69/doc/index.rst @@ -108,7 +108,7 @@ Targets available ================== The default configuration file -``boards/arm/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_defconfig`` +:zephyr_file:`boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_defconfig` only enables the first core. CPU0 is the only target that can run standalone. diff --git a/boards/nxp/mimxrt1010_evk/doc/index.rst b/boards/nxp/mimxrt1010_evk/doc/index.rst index df15589a0a..7982b8c1e7 100644 --- a/boards/nxp/mimxrt1010_evk/doc/index.rst +++ b/boards/nxp/mimxrt1010_evk/doc/index.rst @@ -102,7 +102,7 @@ already supported, which can also be re-used on this mimxrt1010_evk board: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/mimxrt1010_evk/mimxrt1010_evk_defconfig`` +:zephyr_file:`boards/nxp/mimxrt1010_evk/mimxrt1010_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1015_evk/doc/index.rst b/boards/nxp/mimxrt1015_evk/doc/index.rst index f7d6bc1db6..6a08355ff0 100644 --- a/boards/nxp/mimxrt1015_evk/doc/index.rst +++ b/boards/nxp/mimxrt1015_evk/doc/index.rst @@ -100,7 +100,7 @@ already supported, which can also be re-used on this mimxrt1015_evk board: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/mimxrt1015_evk/mimxrt1015_evk_defconfig`` +:zephyr_file:`boards/nxp/mimxrt1015_evk/mimxrt1015_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1020_evk/doc/index.rst b/boards/nxp/mimxrt1020_evk/doc/index.rst index 751ec16687..5a05337264 100644 --- a/boards/nxp/mimxrt1020_evk/doc/index.rst +++ b/boards/nxp/mimxrt1020_evk/doc/index.rst @@ -120,7 +120,7 @@ already supported, which can also be re-used on this mimxrt1020_evk board: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/mimxrt1020_evk/mimxrt1020_evk_defconfig`` +:zephyr_file:`boards/nxp/mimxrt1020_evk/mimxrt1020_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1024_evk/doc/index.rst b/boards/nxp/mimxrt1024_evk/doc/index.rst index c04a3f5d09..76f0d32999 100644 --- a/boards/nxp/mimxrt1024_evk/doc/index.rst +++ b/boards/nxp/mimxrt1024_evk/doc/index.rst @@ -125,7 +125,7 @@ already supported, which can also be re-used on this mimxrt1024_evk board: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/mimxrt1024_evk/mimxrt1024_evk_defconfig`` +:zephyr_file:`boards/nxp/mimxrt1024_evk/mimxrt1024_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1040_evk/doc/index.rst b/boards/nxp/mimxrt1040_evk/doc/index.rst index c2f1e1561c..f01049b7bb 100644 --- a/boards/nxp/mimxrt1040_evk/doc/index.rst +++ b/boards/nxp/mimxrt1040_evk/doc/index.rst @@ -121,7 +121,7 @@ already supported, which can also be re-used on this mimxrt1040_evk board: The default configuration can be found in the defconfig file: - ``boards/arm/mimxrt1040_evk/mimxrt1040_evk_defconfig`` + :zephyr_file:`boards/nxp/mimxrt1040_evk/mimxrt1040_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1050_evk/doc/index.rst b/boards/nxp/mimxrt1050_evk/doc/index.rst index 165f3491f2..8c5fb87a59 100644 --- a/boards/nxp/mimxrt1050_evk/doc/index.rst +++ b/boards/nxp/mimxrt1050_evk/doc/index.rst @@ -147,7 +147,7 @@ already supported, which can also be re-used on this mimxrt1050_evk board: The default configuration can be found in the defconfig file: - ``boards/arm/mimxrt1050_evk/mimxrt1050_evk_defconfig`` + :zephyr_file:`boards/nxp/mimxrt1050_evk/mimxrt1050_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1060_evk/doc/index.rst b/boards/nxp/mimxrt1060_evk/doc/index.rst index 94d76f4924..3b2c159685 100644 --- a/boards/nxp/mimxrt1060_evk/doc/index.rst +++ b/boards/nxp/mimxrt1060_evk/doc/index.rst @@ -154,7 +154,7 @@ already supported, which can also be re-used on this mimxrt1060_evk board: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/mimxrt1060_evk/mimxrt1060_evk_defconfig`` +:zephyr_file:`boards/nxp/mimxrt1060_evk/mimxrt1060_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1062_fmurt6/doc/index.rst b/boards/nxp/mimxrt1062_fmurt6/doc/index.rst index 2c801c454a..dd16e7481e 100644 --- a/boards/nxp/mimxrt1062_fmurt6/doc/index.rst +++ b/boards/nxp/mimxrt1062_fmurt6/doc/index.rst @@ -122,7 +122,7 @@ already supported, which can also be re-used on this mimxrt1060_evk board: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/mimxrt1062_fmurt6/mimxrt1062_fmurt6_defconfig`` +:zephyr_file:`boards/nxp/mimxrt1062_fmurt6/mimxrt1062_fmurt6_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt1064_evk/doc/index.rst b/boards/nxp/mimxrt1064_evk/doc/index.rst index 38d284f1c4..ffdfcd11b7 100644 --- a/boards/nxp/mimxrt1064_evk/doc/index.rst +++ b/boards/nxp/mimxrt1064_evk/doc/index.rst @@ -152,7 +152,7 @@ configuration supports the following hardware features: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/mimxrt1064_evk/mimxrt1064_evk_defconfig`` +:zephyr_file:`boards/nxp/mimxrt1064_evk/mimxrt1064_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/mimxrt685_evk/doc/index.rst b/boards/nxp/mimxrt685_evk/doc/index.rst index 3b0357ffb0..bbaa6d11c4 100644 --- a/boards/nxp/mimxrt685_evk/doc/index.rst +++ b/boards/nxp/mimxrt685_evk/doc/index.rst @@ -111,7 +111,7 @@ already supported, which can also be re-used on this mimxrt685_evk board: The default configuration can be found in the defconfig file: - ``boards/arm/mimxrt685_evk/mimxrt685_evk_defconfig`` + :zephyr_file:`boards/nxp/mimxrt685_evk/mimxrt685_evk_defconfig` Other hardware features are not currently supported by the port. diff --git a/boards/nxp/vmu_rt1170/doc/index.rst b/boards/nxp/vmu_rt1170/doc/index.rst index 28d57464b4..0249dfe3d6 100644 --- a/boards/nxp/vmu_rt1170/doc/index.rst +++ b/boards/nxp/vmu_rt1170/doc/index.rst @@ -125,7 +125,7 @@ following hardware features: +-----------+------------+-------------------------------------+ The default configuration can be found in the defconfig file: -``boards/arm/vmu_rt1170/vmu_rt1170_defconfig`` +:zephyr_file:`boards/nxp/vmu_rt1170/vmu_rt1170_defconfig` Other hardware features are not currently supported by the port.