soc: imx_rt: Enable IMX.RT General Power Controller Driver

GPC driver is used for power management operations on RT series SoCs.
Enable inclusion of the driver into the build.

Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>

modules/Kconfig.mcux

@@ -136,6 +136,11 @@ config HAS_MCUX_GPT
 	help
 	  Set if the general purpose timer (GPT) module is present in the SoC.
 
+config HAS_MCUX_GPC
+	bool
+	help
+	  Set if the general power controller (GPC) module is present in the SoC.
+
 config HAS_MCUX_SNVS
 	bool
 	help

soc/arm/nxp_imx/rt/Kconfig.defconfig.series

@@ -95,6 +95,10 @@ config WDT_MCUX_IMX_WDOG
 	default y
 	depends on WATCHDOG
 
+config PM_MCUX_GPC
+	default y if HAS_MCUX_GPC
+	depends on SOC_SERIES_IMX_RT11XX && PM
+
 if CODE_SEMC
 
 config FLASH_SIZE
@@ -198,17 +202,6 @@ config TEST_EXTRA_STACKSIZE
 	default 1024
 endif # MBEDTLS
 
-if MCUX_GPT_TIMER
-
-# set the tick per sec as a divider of the GPT clock source
-config SYS_CLOCK_TICKS_PER_SEC
-	default 8192
-
-config SYS_CLOCK_HW_CYCLES_PER_SEC
-	default 32786
-
-endif #MCUX_GPT_TIMER
-
 source "soc/arm/nxp_imx/rt/Kconfig.defconfig.mimxrt*"
 
 endif # SOC_SERIES_IMX_RT

soc/arm/nxp_imx/rt/Kconfig.soc

@@ -295,6 +295,7 @@ config SOC_MIMXRT1176_CM7
 	select HAS_MCUX_USDHC1
 	select HAS_MCUX_USDHC2
 	select HAS_MCUX_ENET
+	select HAS_MCUX_GPC
 
 config SOC_MIMXRT1176_CM4
 	bool "SOC_MIMXRT1176_CM4"
@@ -319,6 +320,7 @@ config SOC_MIMXRT1176_CM4
 	select HAS_MCUX_USDHC1
 	select HAS_MCUX_USDHC2
 	select HAS_MCUX_ENET
+	select HAS_MCUX_GPC
 
 config SOC_MIMXRT1166_CM7
 	bool "SOC_MIMXRT1166_CM7"
@@ -350,6 +352,7 @@ config SOC_MIMXRT1166_CM7
 	select HAS_MCUX_USDHC1
 	select HAS_MCUX_USDHC2
 	select HAS_MCUX_ENET
+	select HAS_MCUX_GPC
 
 
 config SOC_MIMXRT1166_CM4
@@ -375,6 +378,7 @@ config SOC_MIMXRT1166_CM4
 	select HAS_MCUX_USDHC1
 	select HAS_MCUX_USDHC2
 	select HAS_MCUX_ENET
+	select HAS_MCUX_GPC
 
 endchoice
 
@@ -598,6 +602,9 @@ config BYPASS_LDO_LPSR
 config ADJUST_LDO
 	bool "Adjust LDO setting"
 
+config PM_MCUX_GPC
+	bool "MCUX general power controller driver"
+
 menuconfig NXP_IMX_RT_BOOT_HEADER
 	bool "Enable the boot header"
 	depends on !BOOTLOADER_MCUBOOT

west.yml

@@ -98,7 +98,7 @@ manifest:
       groups:
         - hal
     - name: hal_nxp
-      revision: 66db7c2a57ec1adfd3574169346ed3af9bf17c0b
+      revision: 36ef159c6b3aaf023e89b48cce7cdc34899ae650
       path: modules/hal/nxp
       groups:
         - hal