patrick/zephyr
1
0
Fork 0
Code Issues Pull requests Actions 8 Packages Projects Releases Wiki Activity

boards: st: stm32h573i_dk: Enable sdmmc support

Browse source 
Configure SDMMC port on stm32h573i_dk.
Disable SDMMC clock check as using 48MHz is not strictly required.

Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
This commit is contained in:
Erwan Gouriou 2024-04-04 11:45:33 +02:00 committed by Fabio Baltieri
parent 58a9f9f528
commit f71c7f21f4
4 changed files with 21 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
boards/st/stm32h573i_dk/Kconfig.defconfig
View file

@ -14,4 +14,11 @@ config NET_L2_ETHERNET
endif # NETWORKING
if DISK_DRIVER_SDMMC
config SDMMC_STM32_CLOCK_CHECK
default n
endif # DISK_DRIVER_SDMMC
endif # BOARD_STM32H573I_DK

3
boards/st/stm32h573i_dk/doc/index.rst
View file

@ -193,9 +193,12 @@ hardware features:
+-----------+------------+-------------------------------------+
| AES | on-chip | crypto |
+-----------+------------+-------------------------------------+
| SDMMC | on-chip | disk access |
+-----------+------------+-------------------------------------+
| USB | on-chip | USB full-speed host/device bus |
+-----------+------------+-------------------------------------+
Other hardware features are not yet supported on this Zephyr port.
The default configuration can be found in the defconfig and dts files:

10
boards/st/stm32h573i_dk/stm32h573i_dk.dts
View file

@ -275,6 +275,16 @@
};
};
&sdmmc1 {
pinctrl-0 = <&sdmmc1_d0_pc8 &sdmmc1_d1_pc9
&sdmmc1_d2_pc10 &sdmmc1_d3_pc11
&sdmmc1_ck_pc12 &sdmmc1_cmd_pd2>;
pinctrl-names = "default";
cd-gpios = <&gpioh 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
status = "okay";
};
zephyr_udc0: &usb {
pinctrl-0 = <&usb_dm_pa11 &usb_dp_pa12>;
pinctrl-names = "default";

1
boards/st/stm32h573i_dk/stm32h573i_dk.yaml
View file

@ -24,4 +24,5 @@ supported:
- usb_device
- usb
- i2c
- sdhc
vendor: st