Fix hard fault due to NULL being passed as argument into
rssi_handler, which now derives the gsm_modem struct pointer from
the argument.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
gsm_ppp_stop should cancel possible running work items.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
The 'work' argument of a delayable work's handler should be
converted to delayable work before passing into the CONTAINER_OF
macro.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The driver performs AT commands configurations using the
system workqueue, this can delay the workqueue by up to 6
seconds to wait for the modem replies, which isn't ideal.
This PR creates a dedicated workqueue for the gsm, and
provides a helper function to reschedule work items to the
gsm workqueue.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The previous bf68b67 commit incorrectly passes minfo.mdm_rssi
value to the modem context data_rssi member during the driver
initialization which causes the `modem info` shell command
to return 0 as RSSI value. Fix that by changing data_rssi
modem ctx member to a pointer that is assigned to the RSSI
variable stored within the modem driver context structure.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
drivers: modem: gsm: Quectel EC21 and BG9x act as a gsm modem without
problem, but COPS commands can returns just one value with 'mode'.
Format and oper are not mandatory. This modification reads 'mode'.
Also a modification on modem_cmd_read_cops_cmd is needed.
Signed-off-by: Jair Jack <jack@icatorze.com.br>
Add RSSI member into gsm_ppp_modem_info structure in order to
get that information using the gsm_ppp_modem_info function.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Make modem_info structure public in order to allow the user
to get modem information using gsm_ppp_modem_info function.
Move modem info query commands into separate function
that's called only once during gsm configuring because
there is no necessity to re-querying modem since
they should not change.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Allow the user to register function callbacks that
are executed during gsm modem configuring and stopping.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Add support for Quectel modem in gsm_ppp modem driver.
The CMUX cmd is based on MUX application notes v1.0(2020-09-22)
for BG95, BG77 and BG600L. Tested and working on EC21e.
As the gsm_ppp doesn't do power control, it is required to power
on the modem manually in the application.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
So far modem API used UART device names / labels. Change API to operate
on device pointers instead, so that we stop using device_get_binding()
in modem core and in some DT compatible modem drivers.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This PR addresses radio signal stength measurement during
and before PPP session. The PR provides provides facility
of readout for both +CSQ and +CESQ versions depending
upon the modems. This PR follows the idea of rssi readout
of PR#35496. Additionally, reliable Cell info update
is also ensured.
Signed-off-by: Tahir Akram <mtahirbutt@hotmail.com>
We do not need the return value of k_sem_take() so ignore it.
Coverity-CID: 236602
Fixes#36313
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Query the numerical network operator id, location area code (LAC)
and cell id. Following AT commands are used:
AT+COPS?
AT+CEREG?
Functionality is enabled by CONFIG_MODEM_CELL_INFO=y.
Tested with uBlox SARA-R410M-02B.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Replace all existing deprecated API with the recommended alternative.
Be aware that this does not address architectural errors in the use
of the work API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In a previous commit, a check was added to ensure modem was properly
attached to packet service before initializing PPP. Failure to perform
this check can lead to the dreaded 'NO CARRIER' issue.
While this is a nice idea, the implementation was lacking because when
the check failed, the entire modem initialization procedure was
restarted from square one. For modems/bearers that were slow to attach,
this is potentially disastrous. The proper solution is to loop only the
'AT+CGATT?' part until it succeeds, or fails N times.
This commit implements this looping behavior (using the work queue).
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Autostarting PPP is far from controversial. There are many, many reasons
someone could have for wanting to control exactly when PPP starts. Power
management, NET_EVENT race condition avoidance and any application not
requiring constant and instant use of networking just to name a few.
This commit introduces a Kconfig setting, GSM_PPP_AUTOSTART, which
controls whether gsm_ppp should connect and initialize PPP at boot. It
is set to "y" as default to minimize surprises for legacy code.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Some modems, under some conditions, have a tendency to get stuck without
a connection due to cached state. We have observed this on some Simcom
LTE modems after large cellular outages. The modems are unable to escape
their cached state for some reason unless they're factory reset (or a
cache clearence is forced in some other way).
This commit allows for the modem to be factory reset at each boot. This
minimizes dependencies on external state by ensuring each power-up is as
similar as possible.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Constifying global data allows to save lots of RAM. This improvement
allows to save 224 bytes of RAM when compiled on ARM, with default
configuration.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The commit 5e97d779bb ("device: convert DEVICE_INIT to DEVICE_DEFINE
or SYS_DEVICE_DEFINE") did not convert the gsm_ppp.c properly. The
power management parameter was not set to NULL but was pointing to
the data pointer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert handful of users of DEVICE_INIT to DEVICE_DEFINE or
SYS_DEVICE_DEFINE to allow deprecation of DEVICE_INIT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All net_bufs allocated to modem_cmd_handler's data->rx_buf are consumed
synchronously in gsm_ppp.c in the same thread. This means that
allocating them with timeout makes no sense, because timeout
will *always* be hit when there are no more buffers in net_buf_pool.
Get rid of the unnecessary timeout, as it doesn't help and just slows
down processing of incoming data, increasing possibility of data
overrun.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far a dedicated buffer was used for data read from modem
interface. New net_bufs were allocated and filled later, which means
that data was lost when no more net_bufs were available in the pool.
Prevent data loss by allocating net_buf before attempting any read on
modem interface. Process incoming data in a loop as long as reading from
interface results in new data. Also remove dedicated buffer
(data->read_buf) and directly fill net_buf content instead. As a side
effect there are less memory copy operations and RAM usage is reduced.
Pre-allocated net_buf is now always appended to data->rx_buf. When there
was no (more) data read from interface to such net_buf, then this empty
net_buf will be on the end of data->rx_buf fragment list. Update
skipcrlf() and findcrlf() implementations to explicitly check for each
net_buf length, instead of blindly assuming them to have at least single
byte.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If other threads are accessing the modem concurrently during gsm_ppp
initialization, they can easily corrupt UART comms. Normally this is not
noticable since those services are usually started only after modem
setup has been completed. But with the new gsm_ppp stop/start
functionality, the need of synchronizing concurrent access in a
structured way has arisen.
This commit ensures modem_cmd_handler is locked when concurrent access
to the modem UART would interfere with the driver, or otherwise cause
problems. Since the semaphore is not available during this period, all
essential calls to modem_cmd_send has been replaced with the non-locking
equivalents.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Application might need to know the GSM modem device name so
provide it in the header file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Attempting to initialize PPP without first ensuring we're attached to
the network packet service will sometimes lead to "NO CARRIER" errors
when we initialize PPP with the modem. This has been observed
reproducibly on some SIMCOM7600E modems.
This commit holds off on PPP initialization until modem has reported
that it is indeed attached by using the "AT+CGATT?" command (see 3GPP TS
27.007)
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
This API allows to drop use of preallocated isr_buf. Most importantly as
a result RAM usage is reduced for each driver utilizing modem_context
framework. Additionally there is less copying done in ISR context, as
data is direcly read from UART FIFO to ring_buf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds an option to query the modem for the SIM's IMSI and ICCID
numbers, just like the modem's IMEI is queried today. This requires
the SIM to be present, which might not be the case for all
applications, so it can be disabled.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
This is needed if muxing is enabled in which case we must
change the UART to muxing UART after the AT+CMUX command
has succeed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using physical UART to connection to the modem, use
the GSM 07.10 muxing protocol and UART mux driver to create
virtual channels to the modem. This will allow simultaneous
PPP, AT and other type connections to the modem.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Run the int_literal_to_timeout Coccinelle script to fix places where
it is clear that an integer duration is being passed where a timeout
value is required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add Kconfig option that allows user to set MCC (Mobile Country
Code). If user does not set it, then automatic operator
registration is used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Misc fixes / enhancements to the GSM driver:
* set the \r as a line ending character
* make gsm_init() static as there is no need to expose it
* print the gsm context pointer at init
* set buffer allocation timeout to modem context so that it is
not infinite
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using global static variable "gsm" everywhere,
store the context when calling DEVICE_INIT(). Then in the device
init function get the context from the device struct. This way
it is possible to use the same functions for implementing two
gsm modem instances. Currently this is not fully possible because
the context is not passed via uart_pipe API and modem_cmd
callbacks. So some future work would still be needed.
In practice this commit does not change anything, it just makes
it a little bit easier to have two instance of this modem which
might be quite unlikely case. Anyway, the driver now follows the
same style how some other drivers are done like Ethernet etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implement uart_pipe functionality for the modem so that it
integrates with the PPP implementation.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Create a driver for GSM modems that use a standard AT command set
and enable Zephyr's own PPP stack for IP traffic.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
