Report more information and do not use `dev->name` so that what the
sample prints looks less similar to the GNSS dump logs.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The adc sample was in the root directory of the adc samples.
Move all the files to a subdirectory adc_dt.
Signed-off-by: Paulo Santos <pauloroberto.santos@edge.ufal.br>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.
DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add the overlay for the esp-wrover-kit, to drive a character display
based on HD44780 chipset using the I2C bus gpio controller PCF8574.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Enabled nxp lpadc driver acquisition time feature, the overlay file
can express acquisition time in microseconds, nanosecond and ADC
ticks.
The purpose of updating these overlay files is not only for local
testing, but also to remind users that they can use this feature.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
After erasing the sector, compare dat read with expected 0xFF pattern
to decide if erasing is successful instead of relying on the
returned code of the flash_erase function
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Create regulator on GPIO for microphone supply
Set pdm data and clk pins in pinctrl
Add xiao_ble_sense overlay for dmic sample support
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The sample wants to print the memory controller base address. However,
MEMC_BASE is used as argument in printf which is defined as long long
int. Use the memc pointer instead to print the base address.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The output example has not the correct indentation for the code-block
directive and therefore adds this output as normal text.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
During a memory mismatch, the sample only prints an error message.
Also print the read and write buffer to see the actual difference.
Moreover, add a print for each compare step to see the sample is still
running.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
MODEM_UBX: Adds Support for UBX Messages in Modem Subsystem.
GNSS API Supported: get_supported_systems, set_fix_rate, get_fix_rate,
set_enabled_systems, get_enabled_systems, set_navigation_mode,
get_navigation_mode.
Boards Tested: MIMXRT1062_FMURT6, VMU_RT1170.
Note: Partial support for U-BLOX Messages is provided as of now.
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Simplify this sample's recently updated configuration, and ensure that
the file suffix feature works in sysbuild.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
After https://github.com/zephyrproject-rtos/zephyr/pull/70438
got merged simultaneously with
https://github.com/zephyrproject-rtos/zephyr/pull/70564
all these tests stopped building properly due to the
change of avaliable variables in Kconfig & cmake.
Let's fix them.
As a bonus, as for kconfig the BOARD_TARGET_STRING is the
same for the hwmv1 backwards compatible name, let's
just remove the check for the old names.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Followup: #69905
Adopting new board terminology for CMake, python, and Kconfig code to
use qualifiers instead of identifiers.
Also adjusted to board target where applicable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Replace all instances of
nrf5340bsim_nrf5340_cpunet & nrf5340bsim_nrf5340_cpuapp
with
nrf5340bsim/nrf5340/cpunet & nrf5340bsim/nrf5340/cpuapp
In these samples/tests twister yamls definitions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace the uses of the hwmv1 names in the samples documentation
with the corresponding hwmv2 ones.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For all samples which handle the nrf5340bsim in some special way
(for example in sysbuild files, or by checking what samples are
supported) handle also building with the hwmv2 names.
Also, let's fix the cmake info message in these respective
samples which tells the user which board target is used for which
part of the app.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The led-strip alias can be determined in the base dts file.
Remove from overlay files and aggregate to the base dts file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Applying the modern way which is adding `default y` and
`depends on DT_HAS_...` to enable configs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removing `choice WS2812_STRIP_DRIVER` to enable the use of multiple
types of WS2812 drivers.
Also, `menuconfig WS2812_STRIP` will be deleted as it does not
correspond to the appropriate settings.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Fix board identifier in overlays for the lpcxpresso55s69_cpu0 target.
Board identifiers were renamed with the following command:
for file in $(find . -name "lpcxpresso55s69_cpu0.*"); do;
mv $file ${file/_cpu0/_lpc55s69_cpu0};
done
Additionally, remove lpcxpresso55s69_ns overlay targets where they are
no longer needed (or rename them where they are)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Both VEVIF and BELLBOARD test cases are unidirectional from the core
executing the test (cpuapp). For VEVIF, cpuapp pings, and for BELLBOARD,
cpuapp pongs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Documentation for IPM MCUX sample did not provide correct command for
building sample. To resolve this, add the "--sysbuild" argument to build
command documentation
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In order to avoid defining almost the same overlays for different
sample codes and/or applications a common overlay file per
display interface is defined under the boards dts folder.
In doing so, an application/sample code will only have to
define another overlay explicitly under application's board
folder if more blocks are to be enabled. In either case, users
should explicitly invoke the requested overfiles at 'west build'
invokation by using the DTC_OVERLAY_FILE system variable.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Update all usages of the MBOX API to the latest API changes (to be
squashed for bisectability).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The heap size for i.MX RT1170 is way too much while for i.MX RT595, it
is too small to afford for 4-bytes formats, e.g. ARGB8888.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The esp32s3_devkitm and the nrf5340dk_nrf5340 only have ws2812 in
each configurations that is procpu and cpuapp respectively.
Rename overlay and conf files to avoid building with unnecessary
configurations.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
ws2812-gpio's `in-gpios` property is not used as an input pin.
Renaming it to `gpios` to reflect the actual situation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
