A simple HTTP server sample application.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Updates the linker script fragments under 'samples' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The last parameter to getsockopt() should be a socklen_t *
not an int *.
Let's fix it to avoid a build warning which breaks this tests
in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Convert all of the NXP SOCs with ENET to use the new
binding scheme, which is used by the new driver.
Convert any boards using this SOC to the new scheme as well,
and remove from the documentation the bit about the experimental
nature of the new driver and the overlay that shall no longer exist.
Some of the boards I do not have the hardware of, so apologies
if something breaks, as I have no way to know. All the boards
were made sure to at least build.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Deprecate ETH_MCUX, by:
- Marking it as DEPRECATED in Kconfig, obviously.
- Unmarking the new driver as experimental.
- Putting the new and old drivers in the same folder.
- Reworking the menu appearance of the driver selection.
Note that technically now it is possible to choose the wrong
driver than what is enabled in DT, this is intentional, but
the correct one will obviously be enabled by default.
- Convert all sample overlays to the new Kconfigs. This was
part of the motivation for the shared overlays, as it was
causing twister/CI logs to look ugly and misleading due
to Kconfig warnings.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Because CONFIG_POSIX_API (required) cannot be selected on that platform,
resulting in build failures.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The native_posix compilations fail with various socket
errors like this:
samples/net/sockets/can/src/main.c:65:9: error: implicit \
declaration of function ‘send’ [-Werror=implicit-function-declaration]
65 | ret = send(fd, &sframe, sizeof(sframe), 0);
| ^~~~
So disable the native_posix board from networking samples as
native_posix board is not compatible with CONFIG_POSIX_API
This is related to commit b8fc1c4c3e ("samples: net: Disable
native_posix target in samples") but disables more network samples
for native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
- TCP should not be disbled by default for subg in this particular
sample since it is mostly used to test network rather than
performance.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
- TCP should not be disbled by default for subg in this particular
sample since it is mostly used to test network rather than
performance.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
For demonstration purposes add a way to capture some arbitrary
data and send it in cooked mode for analysis.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If there are multiple tunnels, then use the tunnel device name
to select the correct one. Note that this tunnel is only used
for network packet capture in this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The CONFIG_MAX_THREAD_BYTES=3 needs to be set for multiple
boards like mr_canhubk3 and xiao_ble when running in usermode.
Too many thread objects (18)
Increase CONFIG_MAX_THREAD_BYTES to 3
Fixes#70955
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The native_posix compilations fail with various socket
errors like this:
samples/net/sockets/echo_server/src/udp.c:45:26: error: implicit \
declaration of function ‘socket’ [-Werror=implicit-function-declaration]
45 | data->udp.sock = socket(bind_addr->sa_family, SOCK_DGRAM,
| IPPROTO_UDP);
Disable the native_posix board from networking samples so that CI can pass.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN sample application only had configuration support for
the Ethernet interface and one VLAN interface, and left the one
VLAN interface unconfigured. Fix this by adding config support for
all three network interfaces created by the sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN interfaces are now Virtual type so we need to
collect only the Virtual interfaces and not Ethernet ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The native_sim USB driver gives this error currently if one
enables CONFIG_POSIX_API.
drivers/usb/device/usb_dc_native_posix_adapt.c:22:10: \
fatal error: sys/un.h: No such file or directory
22 | #include <sys/un.h>
| ^~~~~~~~~~
compilation terminated.
Disable the netusb support from networking shells for native_sim
board for now so that CI can pass.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Changing remaining users of fcntl.h to use the include from our own
POSIX file so that the values in there are consistent in all parts
of the sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If enabling CONFIG_POSIX_API, we get three file descriptors open
before any socket descriptors. The sample exit criteria checks
socket 0 and 1 which is no longer a valid one, so change the
check to be either 0 or 3, and 1 or 4 so that the test can be
run in both when POSIX API is enabled or disabled.
Also disable color printing for the test run so that it is
easier to read the output log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This fixes this error printed by CI:
Too many thread objects (21)
Increase CONFIG_MAX_THREAD_BYTES to 3
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change the sample applications that use network socket API to
use the POSIX_API config because the NET_SOCKETS_POSIX_NAMES is
deprecated. Convert also the zsock_ API calls to plain BSD
socket API calls when applicable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
'native_sim' builds without any issues as part of twister and it also works
when manually setting up Ethernet virtual device (using
tools/net-tools/net-setup.sh).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
'http_get' is one of the few samples that just require connection to
internet (google.com over HTTP or HTTPS) and check if HTTP GET was
successful. Use it for minimal coverage of Native Simulator offloaded
sockets:
* DNS resolving
* basic TCP transfer
* compatibility with Zephyr TLS subsystem (which required some fcntl()
operations)
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So that the sample does not get stuck forever waiting
for an echo packet that will never come.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- Async UART would start receiving some data incorrectly
without HW RX byte counting at baud rates above 115200.
- Increase the UART buffer sizes to be able to receive
whole UART TXs of 1500 bytes sent by SLM at once.
- Remove the Kconfig items whose definition is now redundant.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This sample enables EVENTFD (through NET_SOCKETS_SERVICE)
which is not kconfig compatible with the old
NATIVE_APPLICATION targets (native_posix[//64])
Let's explicity filter out this platforms to avoid the
sample from failing to build
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
due to MQTT now have ALPN support
the example code of using ALPN to connect MQTT
over port 443 need to be added
Signed-off-by: sukrit buddeewong <sukrit.omu@gmail.com>
