This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add USB out support for the BAP shell, so that decoded LC3
data can be sent to the host (e.g. a PC).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The volume controller always set the busy flag in
bt_vcp_vol_ctlr_set_vol, where it should only set it
if the GATT operation succeeds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Send a `READ_MAX_ADV_DATA_LEN` command to the controller at the
initialization of the host to fetch the maximum advertising data length
the host can accept.
This is done because even if the Zephyr controller provide the
`CONFIG_BT_CTLR_ADV_DATA_LEN_MAX` Kconfig symbol, other controllers may
not have such Kconfig symbol. So this is a way for the host to be more
controller-agnostic and provide useful feedback to the users.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Commit adds using host\controller based random number
generator instead of zephyr driver.
No mesh dependency anymore on zephyr system
random driver.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This function is used in many places, but just by reading its
name it is not obvious why it is needed.
By adding some documentation it will hopefully become a bit more
clear that this function is mainly used for auto connection
establishment.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This line was clearly intended to check for the value returned by
ad_init(). The ad_len is unsigned, so checking for a negative value
showed up in a recent Coverity run (no GitHub issue for it yet).
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Update the documentation of `BT_CTLR_ADV_DATA_CHAIN` Kconfig symbol to
say that it's only supported in *non-connectable* extended advertising.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
We can (and do) open multiple channels with a single L2CAP command. If the
remote doesn't support dynamic channels at all, then it sends back a
REJECT_RSP.
We only destroyed the first channel that matched the command PDU
identifier. Fix that and remove all channels that match.
Also add a test that verifies the patch.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Commit fixes bug if dfu server failed to deliver
apply response it gets stuck in applying phase.
In this phase it skips all further client attempts
to apply image again.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Ignore failure to Broadcast ISO remove data path when
terminating a BIG without a data path being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple advertisers overlap over time, the random
delay being applied need many ticker operation context.
This causes the ticker_update interface to return error
causing assertion in the Controller.
This is fixed by not applying random_delay value to the
overlapping advertiser that does not get to use the radio.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor only. The surrounding ifdefs are intentionally not changed in
this patch. They will be in the near future.
Rename the pool and generalize the documentation to allow using this
pool for other events that fit the same criteria. This pool can be used
for any buffer that is processed synchronously, without negatively
affecting 'num complete' messages. E.g. 'cmd complete/status' can be put
in this pool already.
We will be working towards making the host process all event buffers
synchronously. This is because events have no dedicated flow control,
and discarding events in the driver without informing the host creates
problems. Discarding should instead happen in the host higher layers
when unavoidable.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
There was a typo in Kconfig check (missing CONFIG_ prefix) which
resulted in not setting OACP_FEAT_BIT_CRC bit in features.
This also resulted in checksum feature being disabled due to check
in bt_ots_init().
This was affecting OTS/SR/OASP/BV-03-C qualificatio test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
As per the BAP spec, the scan delegator device should add the BASS service
data in the extended advertising data when it requests a broadcast
assistant to scan for it. For testing purposes that's usually the case
with the shell, extended advertising data shall be populated with the
BASS service data.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Add aux offset population assertion check, to ensure the
aux offset calculation is completed before the primary
PDU is setup for transmission.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Commit fixes behavior when provisioning protocol accepts
incoming transaction before ongoing tx transaction is
still active (device didn't receive acknowledgement yet).
Incoming data are ignored until ack is not received.
Specification:
5.3.3 Generic Provisioning behavior
...
If the sender receives a Transaction Acknowledgement
message, then the transaction has completed.
If the sender receives a message with other PDU types,
then the message shall be ignored.
...
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Change default to using advertising coding in ACL connection
when establishing connections on Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adapts flash writing for BLOB IO to RRAM. The previously used write
block alignment is not needed for RRAM.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
An audio stream is unidirectional, so it's always either
TXing or RXing, so the fields can safely be moved to an
enum.
The struct now has both a is_rx and is_tx field. The reason
why two bools are being used, is that the both of them may
be false (we need 3 states).
All access to the rx and tx structs in the union shall be
guarded by these fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
We could start executing the work item after the channel has been
disconnected or destroyed, due to a race condition.
Double-check we are connected before attempting to send data.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This check is repeated many times in `gatt.c`, with various comments.
This patch refactors these occurrences into a named function.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/41789
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
We can't just keep blocking the syswq, people be mad.
Override the timeout value so we always have K_NO_WAIT.
Also print a message to whomever's listening.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
OTS requires that indications about state change are sent after
response to ATT Write.
OTS Specification p.4.4.4.: "An OLCP or OACP operation is started
when the ATT Write Response is received from the Object Server as
a result of the Object Client writing an Op Code to a control point
to perform some desired action. The control point operation ends
when the Object Server sends an indication to the Object Client
with the Op Code set to Response Code."
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To make it easier to understand the code, the following was done:
- Use INITIATING/ADV for state names that are exclusive to central
or peripheral. Previously it was not necessarily clear that the state
BT_CONN_CONNECTING was for central only by just looking at where
it was used. The terms INITIATING/ADV were used in favor
of central and peripheral as these terms also work for SCO connection
establishment.
- BT_CONN_CONNECTING_SCAN -> BT_CONN_SCAN_BEFORE_INITIATING
to make it more clear that we are not scanning and connecting at
the same time. The new name should make it more clear why we are
scanning - only with the intention to start the initiator later.
- BT_CONN_CONNECTING_AUTO -> BT_CONN_INITIATING_FILTER_LIST.
This makes it clear that this state is something different than
BT_CONN_AUTO_CONNECT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
When initially reading some of the host code it was unclear to me
why they were needed an how they are used.
By adding some documentation,
this can hopefully make it easier for others to understand these.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The following warning is issued by clang:
warning: field within 'struct gatt_chrc' is less aligned than 'union
gatt_chrc::(anonymous at subsys/bluetooth/host/gatt.c:1859:2)' and
is usually due to 'struct gatt_chrc' being packed, which can lead
to unaligned accesses [-Wunaligned-access]
This is due to the fact that the uint16_t uuid field requires 2-byte
alignment but it is not marked as packed. Since the enclosing struct is
indeed packed, the required alignment is not guaranteed and so clang
complains. Fix it by ensuring that the union is marked as packed too.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
The Mesh files `proxy_srv.c` and `pb_gatt_srv.c` were using
BT_LE_ADV_OPT_USE_NAME. Add the device name in the advertising data
directly.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the Bluetooth shell and its documentation to not use those
options anymore.
The option of the legacy advertiser run with `bt advertise` and the
behavior hasn't changed. The code has been updated to no longer use the
advertiser option but the original behavior has been reproduced.
The option of the extended advertiser have been updated to be more
explicit. The options `name` and `name-ad` have been removed from the
`bt adv-create` and `bt adv-param`. The option `name` and `dev-name`
have been added to the `bt adv-data` command.
- `name <str>` will advertise the given name.
- `dev-name` will advertise the device name.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When initially reading some of the host code it was unclear
to me why they were needed an how they are used.
By adding some documentation, this can hopefully make it
easier for others to understand these.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
UBSan was showing the following error:
```
runtime error: left shift of 137 by 24 places cannot be represented in
type 'int'
```
Cast the value to `uint32_t` to make UBSan happy.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The comment states the reason for this requirement is to detect
violations by a remote peer. The ATT version of this was removed in
ea04fd95f9. TLDR: It's neither possible
for, nor the job of the host to police the remote device.
We remove this requirement to be more flexible about the number of
priority levels in the system, and to avoid the temptation of using
priorities as a synchronization mechanism.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add support for decoding incoming LC3 data. At this point
we only instantiate a single LC3 decoder, so only one frequency
and duration is supported.
To accomodate for the increased RAM usage, the number of unicast
streams support have been decreased.
Further more, the LC3 handling in the shell has overall been
improved, also for encoding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
`ret` is the amount sent from the current buffer. `sent` contains the
total amount that was transferred in the while loop.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
