As now, with hwmv2, boards can have "/" in their name,
and the board name is not anymore the complete target
name, let's set a new variable with the
whole board target name, but converted into the format
which can be used in paths.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test was way too verbose (produced a log over 65000 lines
long).
Let's mute it a bit. If the test fails, developers
can raise the log level as needed.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test is an attempt at formalizing at least part of the behavior
described in commit 6a79c3deae.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
After https://github.com/zephyrproject-rtos/zephyr/pull/70438
got merged simultaneously with
https://github.com/zephyrproject-rtos/zephyr/pull/70564
all these tests stopped building properly due to the
change of avaliable variables in Kconfig & cmake.
Let's fix them.
As a bonus, as for kconfig the BOARD_TARGET_STRING is the
same for the hwmv1 backwards compatible name, let's
just remove the check for the old names.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The PBP bsim tests had several issues that was not uncovered
until the PA sync timeout was increased. This commit fixes these,
as well as increase some timeout values due to recently
increased PA sync timeout.
Among the issues were lack of support for the alternating PBA
features, missing reset of values and specific time sleeps.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all instances of
nrf5340bsim_nrf5340_cpunet & nrf5340bsim_nrf5340_cpuapp
with
nrf5340bsim/nrf5340/cpunet & nrf5340bsim/nrf5340/cpuapp
In these samples/tests twister yamls definitions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For all samples which handle the nrf5340bsim in some special way
(for example in sysbuild files, or by checking what samples are
supported) handle also building with the hwmv2 names.
Also, let's fix the cmake info message in these respective
samples which tells the user which board target is used for which
part of the app.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This deduplicates a copy of testlib from before testlib was a globally
available cmake library.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
rpa expired bsim is refactored so that every rpa rotation, one of
the adv set belong to an adv_id returns false based on adv_index.
In turn all adv sets under the same adv_Id continues with old rpa.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
This test was way too verbose (produced a log over 65000 lines
long).
Let's mute it a bit. If the test fails, developers
can raise the log level as needed.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in the new runners
due to a (realtime) timeout.
Let's double the timeout so it does not.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
GATT/SR/GAS/BV-01-C has just broken due to what appears
like a minor timing change.
This indicates the test may be too time sensitive.
Just reordering the tests, it passes again.
So let's reorder the test list, and we get the minor
benefit of havign them move alphabetically ordered.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
It is often desired to maximize the chances of receiving advertising
when scanning. To achieve this, the scanner should be enabled all the time.
Some controller implementations (like Nordic's SoftDevice Controller)
handle scheduling differently when scan_window = scan_interval.
Having a macro that defines this scanning configuration simplifies
writing applications.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
One of these tests has been seen failing in older slower
computers due to timeouts, let's increase the timeout so
we don't break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in older slower computers
due to timeouts, let's increase the timeout so we don't
break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in older slower computers
due to timeouts, let's increase the timeout so we don't
break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The fix is to check if any of the adv set's rpa expired
callback returns false, then all adv sets continues with
the old RPA.
Note: Fix is applicable only to adv sets which shares the
same id.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The broadcast sink and broadcast source will now use and verify
the info returned by bt_bap_ep_get_info.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add additional validation of the config data in the broadcast
sink test, both ensuring that the BASE is properly parsed,
that the BASE contains mandatory information and that the
stream get the right values copied.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When using the LC3 codec, all codec configuration are LTV encoded.
The broadcast source did not properly validate this, and it also
uncovered a bug in the bsim test for broadcast sources.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The stack manages to suspend the advertiser before it finishes
transmitting the Outbound PDU Report message to confirm the transmission
of a Provisioning PDU. The test requires the server to become
unresponsive when the Provisioning PDU is sent to the unprovisioned
device to test timeout of the provisioning protocol.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Now, when the deadlock is removed from `bt_mesh_adv_disable` function,
the advertiser can be disabled from the `bt_mesh_send_cb`
callbacks.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When the Bluetooth central samples in an open air environment
it is very likely that there are multiple devices nearby with
a received signal strength stronger than -70 dBm.
To avoid connecting to the wrong device, make the check stricter.
For tests using those samples, the NtNcable attenuation is changed
from the default 60 dBm to 40 dBm to satisfy the new requirement.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Rename uart and uart_async bsim test to reflect
testing of hci_uart sample using UART driver
variants under bsim simulations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Verifies that there is no host RX buffer leak due to disconnections.
That is, not actual host buffer objects but rather the number of buffers
that the controller thinks the host has.
If there is a desynchronization between those two, the result would be that
the controller stops forwarding ACL data to the host, leading to an
eventual application timeout.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
There are quite many BT host test images being built.
Today these are all built in parallel, causing a quite
high load.
Let's split them in their separate sub-scripts,
so we don't parallelize too many builds,
and users have more granularity if they only
want to build a subset.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CIS tests are building quite many
apps on their own.
Let's split them in their separate sub-script,
so we don't parallelize too many builds,
and users have more granularity if they only
want to build a subset.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
LC3 does not define any such configurations, and they are in
fact defined by the BAP. The LC3 header file should thus not
pretend that there are these specific configurations for LC3.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add tests for the GATT permissions to read and write for
characteristics that require encryption and LESC encryption.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The test where it was supposed to read the long characteristic,
only read the "small" characteristic, due to setting the wrong handle.
With the right handle, the test failed and the test had to be
updated to store the data across multiple reads, and then do
the proper comparison.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increases some of the timeouts so that when using this sample
against other interactive devices (such as a phone or the
Zephyr audio shell), then it's easier to do it in time.
Also updates a few of the printks and ensures that we are not
doing name filtering when we have been requested to sync to
a specific broadcast source by a broadcast assistant.
The test for the sample has also been modified to have a longer
timeout to accomodate for the new semaphore timeout values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Broadcast Assistant API should be fully independent of the scan
delegator. Therefore the new struct bt_bap_bass_subgroup has been
defined to avoid a dependency.
Fixes: #68338
Signed-off-by: Ping Wang <pinw@demant.com>
The bt_iso_chan_send function could take an optional
timestamp by using 0 as an indicator. The issue with
this approach was that a timestamp value of 0 is valid,
and could cause potential issue with syncing streams
in a group.
To fully support transmitting with and without timestamp,
bt_iso_chan_send_ts has been introduced, which is the only
function of the two (bt_iso_chan_send being the other) that
supports timestamps.
A new function, rather than adding a boolean to the existing,
was chosen as it simplifies the individual functions as well
as making it more explicit what the function does.
Since the bt_iso_chan_send function is used by LE audio, both
the BAP and CAP send functions have similarly been updated.
Likewise, all tests and samples have been updated to use the
updated function(s), and BT_ISO_TIMESTAMP_NONE has been
removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a test that checks that both advertisers, the legacy and the
extended behaves identically when the stack is suspended, in particular:
- `bt_mesh_send_cb.end` callback is called with error code `0` for the
advertisement that the advertiser already pushed to the ble host
(called `bt_mesh_send_cb.start`),
- `bt_mesh_send_cb.start` callback with error `-ENODEV` is called for
every advertisement that was pushed to the mesh advertiser using
`bt_mesh_adv_send` function before the stack was suspended,
- `bt_mesh_adv_create` returns NULL when attempting to create a new
advertisement while the stack is suspended.
The `bt_mesh_adv_disable` is called from the work because calling it
from the `bt_mesh_send_cb.start` callback will cause a deadlock.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit changes error code returned by `k_sem_take` when it times
out from `-EAGAIN` to `-ETIMEDOUT` because `bt_le_scan_start` also
returns `-EAGAIN` if bt device is not ready, which may lead to invalid
test behavior.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Where advertisement, connection and disconnection is iterated over 5
times, to verify the reestablishment of extended advertisements when
iterating over multiple times. Additionally, the connection
unreferencing has been decoupled from the disconnect event on both
sides, to demonstrate the dependency of the recycle event.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Split into two separate builds: advertiser and scanner to emphasize
clarity and robustness during reestablishment of advertisements and
scanning.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Removed the "operation" infix from the bt_gatt_authorization_cb
callback structure in the Bluetooth GATT header.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
If the receive state is locally removed, then we should not
request permission from the application, as that is implicit
when removing the source locally.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The defines from the Bluetooth Audio assigned numbers are not
specific for LC3. This commit removes the LC3 infix and
the reference to LC3 in the documentation for them.
It also cleans up some of the documentation and
names of the enums.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the parameters for bt_cap_initiator_unicast_audio_stop
so that they are more similar to
bt_cap_initiator_unicast_audio_start.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the parameters for bt_cap_initiator_unicast_audio_update
so that they are more similar to
bt_cap_initiator_unicast_audio_start.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Expand the babblesim tests for LE audio to verify that all the
discovery functions can be called multiple times without error.
HAS is an exception as that has an existing separate check
that disallows discovery multiple times.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The LE Audio implementations do not really support bonding yet,
and removing subs on disconnect is the most effective (and correct)
way of ensuring that we do not subscribe more than once when we
re-discover after reconnection.
The broadcast assistant and the media control client does not
support multiple connections as of this commit, so they needed
special treatment. In the case that we do discovery on multiple
ACL connections, it is important that the existing subscriptions
are removed correctly by calling bt_gatt_unsubscribe.
In order to implement this change properly on some of the clients,
thet had no proper connection references or support
for clearing the data on disconnects, they had to be updated
as well.
The csip_notify.sh test has been disabled, as that expected a
notification in the client, but since this commit removes that
(until bonding is properly supported in the clients), then the
test will fail.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Several places the LE Audio clients called bt_gatt_subscribe without
checking the return value, which could cause some issues in the worst
case, and in the best case, cause some unexpected behavior.
Some implementations had a bit more updating to handle the new
behavior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the CSIP tests take a while to run given the number of
devices, and some of them started to fail in CI because of a
timeout, so we increase the EXECUTE_TIMEOUT a bit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
[Description]
tests: shell: Restart bt will register the same connection callback twice.
Callback next node point to itself, when link established callback function
loop infinitely.
[Fix]
Unregister the previous callback to avoid register repeatedly.
[Test]
After bt init/disable times, create connection successfully.
Signed-off-by: huajiang zheng <huajiang.zheng@nxp.com>
Where extended advertising is restablished through the use of
recycled() callback, registers over bt_conn_cb_register().
Signed-off-by: Luis Ubieda <luisf@croxel.com>
bt_pbp_parse_announcement was defined as uint8_t return value function,
but returned errno values, so it was modified to return an int instead.
The return values are also now more granular and documented.
The function also triggered a coverity issue with the way that it
parsed the data->data, as it would be marked as tainted. This should
be fixed by using the net_buf_simple API, which also improves on
some other parts of the code.
Finally the meta argument for the function was changed from an
unknown sized buffer, where the caller somehow had to know the
size of the metadata before calling the parsing function, to
an output pointer. This also omits the requirement for the
caller to always copy the metadata, where now it just
gets a pointer to the metadata in the bt_data struct. The application
can now always decide whether to continue to parse the metadata or
to copy it, using the pointer and the return value of the function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the kconfig option COMPILER_WARNINGS_AS_ERRORS instead
of passing the compiler option directly to the build.
That allows us to do whatever needs to be done in cmake to ensure
warnings are treated as errors.
Also handle better options and paths with spaces on them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Minor fixes in this test script to:
* Start with an empty flash even if there was a left over flash file
on disk
* Not overwrite the simulation activity from the first part of the test
in the second part of the test, to allow looking into the
traffic and to allow rerunning the test in check mode, to ensure
there is no radio activity changes when another change is done.
* Set the simulation id to something more unique (it was just
"peripheral" before which is too easy to be repeated in another
test)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the handling of buffers with fragments. What seems to have been
broken is the metadata reference that was not passed to the next frag in
the chain.
Add a test to regression too.
The main user of this is IPSP.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Adjust mesh test timing and timeout value for Advertising
Extensions use/fix in Zephyr Controller. The scanning in
Zephyr Controller is delayed when using extended scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After removing 20ms in advertiser, all subnetwork beacons are sent as high
dense packet of frames with minimal distance between them. That might
cause collisions if beacon interval on devices will coincide.
This commit adds an artificial delay between each subnet advertsing
beacons.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Add callbacks to the stream objects that reflects the
state of the isochronous channel. The connected callback
is called when the isochronous channel is connected, and
similarly the disconnected callback is called when it is
disconnected.
There is a special case for unicast, where if the ACL
disconnects first, then we won't get a ISO disconnect
callback. It should be assumed that the isochronous channel
is no longer valid when the BAP stream enters the idle state,
i.e. when the "released" callback is called.
The purpose of the new callbacks is to provide additional
information to the application. Especially the unicast client
can use this to determine when the stream_start function
can be called again, as there can only ever be 1 outstanding
CIS connection request at a time, but there can be multiple
GATT requests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Improved the connection reference handling in the BabbleSim test
project in the Bluetooth Host category.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a new BabbleSim test that validates the authorization callback API
from the Bluetooth GATT header.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Bluetooth Mesh Protocol 1.1 is backward compatible with Bluetooth Mesh
Profile 1.0.1, therefore the stack can still be qualified for 1.0.1 if
needed. But explicit support for both versions requires additional
maintenance efforts and doubles the CI time. To make the stack
qualifiable for 1.0.1, the one needs to remove Private Beacons reception
and compile out SHA256 algorithm support.
What is changed:
- Removed `CONFIG_BT_MESH_V1d1` option.
- Removed `transport_legacy.c` which was using 1.0.1 implementation. The
new transport layer has new SaR logic that should still be possible to
qualify for 1.0.1.
- Removed the legacy transport Kconfig options. They are superseded by
the new transport Kconfig options.
- Tester app: `overlay-mesh-v1d1.conf` is merged into
`overlay-mesh.conf`.
- Removed BabbleSim tests for 1.0.1.
- Updated documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add new workflow steps to the babblesim workflow to run
also the UART tests on the nrf52_bsim.
This commit:
* Enables the single device tests (which we may
move to the normal twister workflow once we fix the
requirement for a fixture)
* Adds as a placeholder the infra for multidevice tests.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The meaning of bit0 in the audio location bitmap will change to
mono audio, so we update the audio location macro and releated
test cases.
Refer to BT SIG ES-22266.
Signed-off-by: Bi Jian <bi_jian@qq.com>
The channel allocation was incorrect when setting up multiple
streams to a single device, in which case we should apply
individual bits to each stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Previously it was not always possible to prepend the header.
It was not possible if the application neglected to reserve the space
for headers. This is bad because it forces a buffer segment allocation
even if the buffer had enough room for the headers. E.g. a payload of 10
bytes in a netbuf of 30 bytes would have been segmented.
We now explicitly reject the buffer if it does not have the headroom.
This allows us to do a nice thing; simplify L2CAP segmentation.
We convert the SDU from the application into a PDU payload, by
prepending the SDU header, i.e. the SDU length in the original buffer.
This PDU payload is ready to be chunked into PDUs without having to keep
track of where in the SDU we are. This has the effect of removing a
bunch of logic in the segmentation machine.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Enable by default the access layer responses random delays.
Commit also adapts all mesh models, samples and
babblesim tests to use random delay functionality correctly.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
If $BASH_SOURCE is the empty string, then those two tests end up with
the same simulation ID. That's not a good time.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Refactor the bap_test_stream struct and rename to audio_test_stream
so that it can be used by CAP as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For better manageability of tests building, add possibility to build
BabbleSim Bluetooth BIS tests by Twister.
Signed-off-by: Piotr Golyzniak <metody159@gmail.com>
Add a basic connection test between two devices,
in which the controllers are in separate nrf52_bsim devices
connected over UART to the devices running the host+app.
The controllers are running the HCI UART async sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a basic connection test between two devices,
in which the controllers are in separate nrf52_bsim devices
connected over UART to the devices running the host+app.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the bsim test for the BAP broadcast to use 2 bis.
This tests a larger part of the code, and also verifies
that we can send and receive on 2 BIS without any ISO errors.
This requires the ADV interval to be a multiple of ISO interval
- 10ms, so the advertising interval has been set to 80ms.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
PBP API allows sources to create a Public Broadcast Announcement.
PBP API to parse a Public Broadcast Announcement.
public_broadcast_source application starts extended advertising and
includes a Public Broadcast Announcement. The advertised broadcast
audio stream quality will cycle between high and standard quality.
public_broadcast_sink application scans for broadcast sources and
synchronizes to the first found source which defines a Public Broadcast
Announcement including a High Quality Public Broadcast Audio Stream
configuration.
Add bsim tests for Public Broadcast Profile APIs.
Add shell implementation for Public Broadcast Profile APIs.
Signed-off-by: Daniela Andreea Dumitrache <danielaandreea.dumitrache@nxp.com>
Adds two test-cases to `test_suspend.c`, both checking that gatt
advertisement is stopped when suspending Mesh, and that is started again
when Mesh is resumed.
The first test-case involves suspending and resuming Mesh, and
the second test-case involves suspending Mesh and disabling Bluetooth,
then re-enabling Bluetooth and resuming Mesh.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Renames tx to DUT and rx to Tester to clarify roles in test.
Re-uses the same body for suspend/resume and suspend/disable/resume
for DUT with a parameter to toggle disabling BT.
Re-uses the same Tester config in both existing test-cases as the
previous configs were duplicates.
Updates the dut suspension status in the message handler.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Extracts logic related to waiting for packets from
`test_advertiser.c` and `test_beacon.c` to use in a sync mechanism.
Introduces a sync mechanism in bsim with the functions
`bt_mesh_test_send_over_adv` and `bt_mesh_test_wait_for_packet`
Extracts gatt-related logic from `test_advertiser.c` into a separate
file so it can be re-used.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Emitting network beacons in parallel to proxy functionality
causes collisions. The commit disables network beacons and
allows the test scenario to be more precise.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
On newer GCC version warnings were emitted because of a `memcpy`. The
size parameter was larger than the source's size because it was using
the size of the destination, which was a `bt_uuid_128` when the source
is a `bt_uuid_16`.
Fix the issue by creating a new variable for CCC UUID in both the
central and peripheral code. The variable need to be static because the
discover parameters must remain valid until the start of the discover
attribute callback.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The recommendation to have 20ms is fair for two
consecutive messages over a single bearer. When mesh
sends two messages it can be interpreted as two
bearers working in parallel. No need to keep
an artificial 20ms delay for that. Delay was
removed and all related bsim tests were fixed.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Some beacon tests have strict time conditions and depend
on randomization interval that doesn't guarantee test pass.
This change fixes strict conditions.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
