FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.
DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Test defines a lopback between i2c driver master and nrfx TWIS slave
to verify their functional correctness.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
GRTC peripheral is present on nRF54H20,
so the tests should be executed on this target as well.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
When using sysbuild,
set the primary MCU index to be the app core
only when we are building the test app in the app core.
Otherwise, if the test app is build in the net core,
the test command line parameters won't be sent by default
to it, and tests will fail.
Luckily, these tests are only built in CI using sysbuild
when we target the 5340bsim app core, and in all but 2,
even if sysbuild was used, this setting was propagated
to the zephyr build if we had separate net and app core
images.
The issue was introduced during the transition to
hwmv2.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add overlay for nrf52_bsim to the fixed_top test.
For bsim board RTC register address has to be translated.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The configuration file is mostly tested for the nRF53 series
where the controller configuration is usually from the
hci_ipc sample.
This means that the existing audio.conf before this commit
has not really been tested for audio, and were missing a few
configurations to make it work properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit adds a test for veryfing new functionality of storing
mutliple interfaces per single multicast routing entry.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Adds a DAC driver for Texas Instruments DACx0501 family of devices
Signed-off-by: Eran Gal <erang@google.com>
Co-authored-by: Martin Jäger <17674105+martinjaeger@users.noreply.github.com>
This sets up a backing device, creates a FAT file system, then opens a file
as a loopback device and runs the disk_access tests on that.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
So far test cases in TCP test suite were represented by magic numbers.
With the increasing size of this test suite, it started to become
troublesome to follow, which number represents which test case or what
number can a new test case get.
Introduce a new enum for the test suite, which can be used to represent
individual test case. It simplifies adding new test cases (test case ids
are now defined in a single place, so easier to extend), and also
improves code readability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify, that when TCP stack received FIN packet containing data bytes,
the data is provided to the application and respective seq/ack counters
are updated respectively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a test to protect against future regressions in the ioctl F_SETFL
operation of eventfd. Flags are set and unset and validity of the file
descriptor is checked by reading and writing.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
Allow changing the CoAP Block-wise transfers block-size
for subsequent GET requests.
It looks like Leshan switches block size back to its
configured value, if it is smaller.
So even when we send block N=0 with size of 512, Leshan
seem to handle that properly but still asks N=2 with
block size 256(if that is configured).
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The network interface parameter for net_eth_get_vlan_tag() should
be the VLAN interface so use the search loop properly.
Earlier the main interface could be checked.
Add also test cases for this so that we can catch that the func
works properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add nRF54L15 to platform_allow in the sample.yaml:
- clock_control_api,
- nrf_clock_calibration,
- nrf_lf_clock_start,
- onoff.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Since the minimum/maximum supported bitrates are now stored in the common
CAN controller driver configuration struct, retrieving these can no longer
fail.
Add new CAN controller API functions can_get_bitrate_min() and
can_get_bitrate_max() reflecting this and deprecate the existing
can_get_min_bitrate() and can_get_max_bitrate().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Previously the logic was inverted for error_callback_en where 0 was
enablement and 1 was disable. This was likely done so that the default,
sensibly so, was to enable the error callback if possible. A variety of
in tree users had confused the enable/disable value.
Change the name of the flag to error_callback_dis where the default
remains 0 (do not disable the callback!) and correct in tree uses of the
flag where it seemed incorrect.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
LLEXT on Xtensa now supports both shared and relocatable (partially
linked) extensions. This commit adds a copy of the LLEXT test for the
relocatable case.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
It's needless complexity, and the terminology clashes with
Bluetooth (HCI frags).
It has one user, IPSP, that is going away soon.
Removing frag support will allow a future optimization, removing the
need for HCI and L2CAP fragment buffer pools, saving memory.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add test which is using one SPI master and one SPI slave instance.
There is already a loopback test for SPI master so this test is
focusing on SPI slave API. Test requires 4 pairs of GPIO pins
shortened together. One set of pins is used by SPI master and
one for SPI slave.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
First sector starts at CONFIG_EXT2_DISK_STARTING_SECTOR.
This commit fixes calculating free space, based on that value.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
This extends the test for memory mapped stack, as the address of
memory mapped stack object would be different than the actual
stack object.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the test for memory mapped stack, as the address of
memory mapped stack object would be different than the actual
stack object.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This test is intended to teach the conventions and best practices to a
potential contributor that wants to add a test, for say a new feature.
It is liberally commented on purpose, so new contributors don't have to
spend two weeks understanding the intricacies of the simulator, the bsim
test framework, the native builds, backchannels, etc..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This code can be found (kinda) duplicated all over
`tests/bsim/bluetooth`.
Put it in a common place.
Refactoring the current tests will be done in a future commit.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Improve function which guesses the test name so the calling
script can be invoked from any folder, not just Zephyr's
base.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fixes some missed renames for overlays with the recent change
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This API is not widely used and it is actually broken since device
runtime power management is not checking it when suspending and
resuming.
On top of that, this API is very close to pm_device_busy* API,
close enough to consolidate in only one API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
EATT is not properly used by LE audio nor is the
Zephyr implementation very good, so disable for now
or at least until the BSIM tests are passing with it
enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add an instance of the output diagnostics sensor for the
power train switch TLE9104 to the build all tests.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Increase the supported receive state count to 4, as
several on-market device have at least 2 and sometimes
more.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This patch adds support for custom commands to be executed during the
build of an llext target. The commands can be executed at different
points in the build process:
- PRE_BUILD: Before the llext code is linked.
- POST_BUILD: After the llext code is built, but before packaging
it in an .llext file.
- POST_PKG: After the llext file has been created.
Note that PRE_BUILD is not supported for ARM targets, as in that case
object files are used directly and there is no actual linking step.
The commands can be added using the new add_llext_command() function.
An example usage of it, along with some target properties, is added to
the hello_world test case.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add entry for st7796s to display build_all test, so that the controller
driver will be built by CI.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Tests which were using the new nordic UART shim where failing
on the bsim targets. They are now fixed and tests can be
re-enabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The initial version of an input driver for Cirque Pinnacle ASIC supports:
* Setting sensitivity
* Choosing between relative and absolute modes
* Relative mode
* Primary tap
* Swapping X and Y
* Absolute mode
* Setting number of idle packets
* Clipping coordinates outside of active range
* Scaling coordinates
* Inverting X and Y coordinates
Signed-off-by: Ilia Kharin <akscram@gmail.com>
This commit fixes 'test_verify_send_report()' function as it was
not properly waiting for a MLDv2 report after sending a query. The
asserted value was set for the previous report sent after joining a
group.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Update prj.conf so that
subsys/net/lib/sockets/socketpair.c
is pulled into the build and zsock_socketpair() is
properly defined.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Check for the existence of
pthread_rwlockattr_getpshared()
and
pthread_rwlockattr_setpshared().
Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
This adds a board name that got missed in commit
8dc3f85622 (hwmv2: Introduce Hardware
model version 2 and convert devices)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Set CONFIG_BT_MAX_PAIRED with same value as in host.
This is needed for CSIP tests with three lower testers:
CSIP/CL/SP/BV-07-C, CSIP/CL/SP/BV-03-C, CSIP/CL/SP/BV-04-C,
CSIP/CL/SPE/BI-01-C
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Rename ad5592 files in dts, driver and include to ad559x and add support
for I2C bus which is required for AD5593.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This commit adds CSIS command to change type of SIRK.
This is needed for CSIS/SR/SP/BV-05-C test case.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There was a make-shift mutex implementation added to thrift
while waiting for C++11 thread support in the SDK. This was
fairly racey and would cause issues in CI regularly.
Make the tests build-only for now until C++11 thread, mutex,
etc support is stabilized.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Based on the iis2dlpc driver, with some significant differences in
interrupt handling.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Remove explicit timeouts which are either the same as the
default one or smaller.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's increase the timeout for a few tests whose
timeout is less than 3x a typical execution time in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test keeps its own partial way of running tests.
Let's have it kill stuck processes in the same way as
the rest (sending another kill 5 seconds after, and printing
a message about what happened)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Outgoing block-transfers now set the socket hint
to ONGOING as long as the BLOCK1/BLOCK2 header has
MORE flag set to true.
This means as only the last packet in the block-transfer
set the socket hint to LAST or ONE_RESPONSE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To give an idea of which tests are taking
too long either on CI or locally.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Create the folder for the results if it does not exist.
Fixes these warnings in CI:
```
touch: cannot touch '/__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml': No such file or directory
realpath: /__w/zephyr/zephyr/./bsim_bt/
53_bsim_results.xml: No such file or directory
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add necessary overlay and stm32h573i_dk in i2c_target_api test case
to enable the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When thread stack is defined as an array, K_THREAD_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone thread stack has its size calculated by
Z_THREAD_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_THREAD_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When kernel stack is defined as an array, K_KERNEL_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone kernel stack has its size calculated by
Z_KERNEL_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_KERNEL_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The reserved flash space for coredump is 4KB. However,
the dump_stack itself is larger than 4KB due to kernel stack
size adjustment. So enlarge the space for another page.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since there is a K_THREAD_STACK_LEN, its kernel counterpart
should also be prefixed with K_ for consistency.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Changing remaining users of fcntl.h to use the include from our own
POSIX file so that the values in there are consistent in all parts
of the sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The syscall name has _impl postfix so adjusting the stub
name.
zephyr-sdk-0.16.5-1/x86_64-zephyr-elf/bin/../lib/gcc/
x86_64-zephyr-elf/12.2.0/../../../../x86_64-zephyr-elf/bin/ld.bfd:
app/libapp.a(lwm2m_engine.c.obj): in function `zsock_fcntl_impl':
.../syscalls/socket.h:363: undefined reference to `z_impl_zsock_fcntl_impl'
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The setting is deprecated so change the code to either use the
native zsock_* API or enable POSIX_API to use the BSD socket API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The test expects to use various POSIX APIs so enable the config.
Enabling POSIX_API requires also increase of max file descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This test is an attempt at formalizing at least part of the behavior
described in commit 6a79c3deae.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
When setting a name to a network interface, verify that no other
interface has the same name as that would make very difficult to
select an interface by a name.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The DHT20 sensor is a temperature and humidity sensor that uses I2C to
communicate with a microcontroller. The DHT20 sensor is Aosong.
use standard crc
update description to add reference to AHT20 and AM2301B
clean code, use defines and bit manipulation
add dht20 to i2c test suite for build tests
update bit manipulation
use more defines instead of raw numbers
add bindings to allow aht20 or am2301b to be used in devicetree
in all 3 cases, the same dht20.c driver is compiled
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
Uncomment the check for sockatmark() to ensure that the function
is declared in sys/socket.h, as a stub implementation was added
in the previous commit.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Uncomment netdb.h tests now that we have an implementation and
can check for the existence of e.g. hostent, netent, protoent,
and servent structure fields, as well as associated accessor
functions.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Uncomment net/if.h tests in tests/posix/headers since we now
have an implementation and can check for the existence of
structures, functions, etc.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
The log subsystem defines LOG_ERR as a macro, which conflicts
with the standard POSIX LOG_ERR log level (3).
Reorder includes to avoid errors.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Check if syscalls can be accessed from both kernel and userspace, and if
optimised away ones indeed point to NULL.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
