To better handle all possible definitions of restrict
or __restrict keyword and avoid redefinition errors, use
the ZRESTRICT pre-processor defined in toolchain.h
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Don't define clockid_t in Zephyr in case of ARC MWDT libc
is used as ARC MWDT libc provides clockid_t.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The fdtable infrastructure provides a possibility to prevent
concurrent access to file descriptor. Use that functionality
in eventfd API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implement MSG_WAITALL flag for stream sockets. Setting this flag on
`recv()` call will make it wait until the requested amount of data is
received.
In case both, MSG_WAITALL all is set and SO_RCVTIMEO option configured
on a socket, follow the Linux behavior, i. e. when the requested amount
of data is not received until the timeout expires, return the data
received so far w/o an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some of what's supposed to be in <time.h> was lost because this header
attempts to define everything using more primitive include files.
Instead incorporate the contents from the toolchain-provided header.
Any gaps should be picked up by the legacy content present in this
file, which should not conflict with the toolchain header.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There exist zsock_ counterparts of the two mentioned
functions, but they were not exposed in the Zephyr POSIX API
(CONFIG_POSIX_API=y). This commit fills the gap.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
This implements a file descriptor used for event notification that
behaves like the eventfd in Linux.
The eventfd supports nonblocking operation by setting the EFD_NONBLOCK
flag and semaphore operation by settings the EFD_SEMAPHORE flag.
The major use case for this is when using poll() and the sockets that
you poll are dynamic. When a new socket needs to be added to the poll,
there must be some way to wake the thread and update the pollfds before
calling poll again. One way to solve it is to have a timeout set in the
poll call and only update the pollfds during a timeout but that is not
a very nice solution. By instead including an eventfd in the pollfds,
it is possible to wake the polling thread by simply writing to the
eventfd.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Fix thread fault, on user mode, when reading variable rt_clock_base.
For the moment, clock_settime is left without system call:
we don't want to expose clock_settime without figuring out access
control
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
Adding the ability to set and get pthread names by defining
some non-standard extension functions that were first
introduced by Glibc.
Similar to zephyr thread naming, these allow for thread
tracking and debugging even when using the more portable
posix API.
Though Glibc was the originator, the current POSIX functions
have return codes based on Oracle's adopted spec, so these
functions follow suit. The Oracle and Glibc function
prototypes match.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
While CONFIG_ARCH_POSIX in general isn't compatible with Zephyr POSIX
subsys (because CONFIG_ARCH_POSIX itself is implemented on top of
POSIX, so there're obvious conflicts), apply workaround to allow to
at least use clock_gettime() and clock_settime() functions.
This change is grounded in upcoming support for date manipulation
commands for Zephyr shell, which are implemented using functions
above. There's no guarantee that CONFIG_ARCH_POSIX and Zephyr POSIX
subsys will coexist for any other usecase. (But the change is
relatively clean and is definitely in the right direction of
prototyping ways of such a coexistance.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
(cherry picked from commit 4a05644bce81f4792c018964d29c1158f1982d1e)
If unistd.h is included while CONFIG_POSIX_API is not
defined, there is a mismatch of extern C braces that will
cause compile errors
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Other posix headers were already wrapped, this one seems
to have been missed so it can be compiled with C++
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
This commit fixes an issue observed with SimpleLink sockets with
multiple definitions of `gethostname` function. So far, the definition
within `socket.h` was not visible when offloading was enabled.
As this is no longer the case, and SimpleLink partially uses POSIX
subsystem, builds for this platform resulted in compilation error.
The issue was fixed by moving `gethostname` declaration in unistd.h
inside the `#ifdef CONFIG_POSIX_API` block.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Otherwise, depending on the order of includes, different parts of code
may get different values for these constants.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Newlib has it defined in sys/timespec.h, and thus per the established
conventions, everything else relies on it being there. Specifically,
minimal libc acquires sys/timespec.h with a similar definition, and
POSIX headers rely on that header. Still with a workaround for old
Newlib version as used by Xtensa (but all infrastructure for that is
already there; actually, this patch removes duplicate similar-infra,
which apparently didn't work as expected by now, so now we have a
single workaround, not 2 different once).
To emphasize a point, now there 2 headers:
sys/_timespec.h, defining struct timespec, and
sys/timespec.h, defining struct itimerspec
That's how Newlib has it, and what we faithfully embrace and follow,
because otherwise, there will be header conflicts depending on
various libc and POSIX subsys options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
poll() and related things are expected to be declared in this header
by POSIX applications.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A few of these headers are currently empty and provided to avoid
compiler errors when building existing software.
This set of headers is what is required to build
https://github.com/open62541/open62541 with Zephyr.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per POSIX, open() is defined in <fcntl.h>. fcntl.h in turn comes from
the underlying libc, either newlib, or minimal libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
That's the header which is supposed to define them, there was even
FIXME on that in mqueue.h.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unfortunately, Zephyr SDK 0.10.0 ships with outdated Newlib 2.0.0
(from 2015 or earlier) which lacks sys/_timespec.h header, requiring
ugly workaround of defining struct timespec inline (the whole idea
was to standardize on sys/_timespec.h header for different libc's).
This is similar to earlier workaround for struct timeval definition
introduced in a6aee9b4c8. Zephyr SDK ticket for this issue
is https://github.com/zephyrproject-rtos/sdk-ng/issues/64, and it
will ve possible to remove both workarounds when Xtensa toolchain
will be upgraded to newlib version consistent with other
architectures.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
POSIX subsys defines struct timespec in <time.h> (as POSIX public
API requires), but newlib defines in in sys/_timespec.h, which
inevitably leads to inclusion order and redifinition conflicts.
Follow newlib way and define it in single place, sys/_timespec.h,
which belongs to libc namespace. Thus, we move current definition
to minimal libc, and will use either minlibc's or newlib's
definition, instead of trying to redefine it.
This is similar to the introduction of sys/_timeval.h done earlier.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Newlib libc already provides sys/stat.h, so trying to have sys/stat.h
on the level of POSIX subsys inevitable leads to include order and
definition conflicts. Instead (as most of other sys/* includes)
should come from the underlying libc.
While moving, made unrelated change of removing #include <kernel.h>,
to accommodate the change reviewers.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The _k_mutex linker section is used to gather instances of
struct k_mutex into a list so that init_mutex_module() could iterate
that list to perform runtime initialization tasks. In this case, we're
not defining a struct k_mutex but rather a struct pthread_mutex which is
a completely different structure. Not only those struct pthread_mutex
would be corrupted with unexpected data, but since they're not the
same size as struct k_mutex, the actual struct k_mutex instances that
follow in the list would be misaligned and get corrupted too.
There is nothing that requires runtime initialization in the static
definition of a struct pthread_mutex so let's remove the section
attribute.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Current code implement CONFIG_MAX_PTHREAD_COUNT as the maximum number
of POSIX threads that can ever be created, rather than the maximum
number of active POSIX threads. Use pthread_state of struct posix_thread
to track the state of posix thread in posix_thread_pool so that we can
reuse the unused posix thread.
Fixes#15516.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Unfortunately, Zephyr SDK 0.10.0 ships with outdate Newlib 2.0.0
(from 2015 or earlier) which lacks sys/_timeval.h header, requiring
ugly workaround of defining struct timeval inline (the whole idea
was to standardize on sys/_timeval.h header for different libc's).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
According to POSIX, that's the header which defines this function.
Similarly, nothing in POSIX indicates that <time.h> should have
access to struct timeval, so it's removed (it's made accessible
to <sys/time.h> via <sys/_timeval.h> introduced earlier).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Exactly one caller of pthread_barrier_wait() should receive a return
value of PTHREAD_BARRIER_SERIAL_WAIT; all others should receive zero
(or an error code). Added a test to match.
Fixes: #9953
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some older variants of newlib (like what we have on xtensa or riscv in
SDK 0.9.5) define timespec and itimerspec in sys/types.h. The timespec
can be handled by a check of __timespec_defined. However itimerspec
doesn't have anything similar so we have to do it by newlib version
info.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With newer newlib we get a build error with mqueue.h realted to mode_t.
Let's just let newlib define mode_t and have minimal libc also define
it in sys/types.h. So we remove the duplicated definition in
posix/unistd.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Both SDK 0.10.0-beta2 and the ARM gcc 2018q2 run into a build issue with
newlib and conflict definitions of mode_t type.
First we need to add some ifdef protection if mode_t is already defined
and set _MODE_T_DECLARED if we are the first to define it.
Secondarily, we rename include/posix/sys/types.h to
include/posix/posix_types.h so that we aren't getting a name collusion
with the system sys/types.h and that we can easily and clearily include
it (which we need to do to pull in the info from newlib).
Fixes: #12224
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
All the handling of POSIX file descriptors is now done by fdtable.c.
fs.c still manages its own table of file structures of the underlying
fs lib.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Some ports, e.g. nios2, have POSIXish headers (e.g. signal.h) in
their toolchains, which get includeded otherwise, and cause
definition conflicts.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
From-current-dir includes like "sys/types.h" are dangerous - they
turn out to cause #include_next directive to not work as expected -
instead of including next file (which is in our case should be
libc's), it will include the same file once again (apparently
because with #include "", a file is found from the current dir,
so next search will countinue with -Iinclude/posix, and find
sys/types.h there again).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
For read/write/lseek, use size_t and off_t types, as mandated by
POSIX:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/unistd.h.html
Also, prototypes of unistd.h functions should not depend on
CONFIG_POSIX_FS, as (many) of them deal with generic I/O, not with
files in filesystem per se.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
