We were missing a helper function that can be used to check
whether the given function is the virtual VLAN interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit refactors the Intel SSP DAI driver to support dynamic
management of SSP IP. This change additionally separates the management
of the DAI part from the management part of the SSP IP.
Key changes:
- Add new static functions to manage SSP IP power.
- Update the DAI SSP configuration functions to use the new management
approach.
- Update device tree bindings and instances to reflect the new SSP IP
management mechanism.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
This test is disabled upstream for a while and only run on zephyr
toolchains. Logging is missing the support needed for userspace, see
releated issue.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a kernel tickless test, we should not able PM here. PM should be
tested in own environment only or we get unexecpted behavior.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tickless kernel is default and has been for some time. This test is
actually testing PM and without proper setup it is doomed to fail on
various platforms where PM needs special considerations and hooks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Improve the default serial backend init level.
The documentation says to be bigger than the init level of the serial
device used. Since serial devices default to the kernel device init
level (50) then put this to default of application level drivers (90).
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Reintroduce the overlays for native_sim/native/64 and
native_posix/native/64 to verify all bitrates on those platforms.
These were removed in fddbd79cf7.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
RAM disk access is always enabled on qemu_x86_64, so checking for it first
means that NVMe is never selected.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add support in bsim compile script to accept EXTRA_CONF_FILE
so that overlay conf files can be supplied at compile time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
testing_device_lock is no longer used and the logic
using it is never used / needed. Just remove it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Adds a config that enables sending the object version for all objects.
According to LwM2M specification v1.0 and v1.1, non-core object versions
other than 1.0 'must' be provided, while all other versions 'may' be
provided. With specification v1.2, a client 'can always attach Object
Version Information'. Or in other words, it is OK to always report the
object version with all specifications.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
To make it easier to understand the code, the following was done:
- Use INITIATING/ADV for state names that are exclusive to central
or peripheral. Previously it was not necessarily clear that the state
BT_CONN_CONNECTING was for central only by just looking at where
it was used. The terms INITIATING/ADV were used in favor
of central and peripheral as these terms also work for SCO connection
establishment.
- BT_CONN_CONNECTING_SCAN -> BT_CONN_SCAN_BEFORE_INITIATING
to make it more clear that we are not scanning and connecting at
the same time. The new name should make it more clear why we are
scanning - only with the intention to start the initiator later.
- BT_CONN_CONNECTING_AUTO -> BT_CONN_INITIATING_FILTER_LIST.
This makes it clear that this state is something different than
BT_CONN_AUTO_CONNECT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
1. Correct node label in k64 overlay for ptp test
- Not sure if this actually matters since it appears
that actual hardware is no longer tested in net tests
2. Include fsl_enet with <> instead of "".
3. Build the ptp clock driver only if the ethernet driver is built
- Technically I think the 1588 timer should be able to be used
even if the ethernet mac is not used, but I would imagine this
to be an extraordinarily rare, weird, and niche use case, so to fix
the current CI error caused by net test disabling ethernet drivers,
couple the ptp clock driver to the ethernet driver in the build
configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the tests that were relying on those options. A lot of test were
actually not using the name, for those the name have simply been
removed. For the others that were using the name, add it in the
advertising data or the scan response data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This is an API test and it was not designed to run in a real target.
Some attempts to run this test in devices cause the device to hang
after the test execution because the device sleeps and no wake up
source is set.
Fixes#68453
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
USB High-Speed devices must be able to operate at both High-Speed and
Full-Speed. The USB specification allows the device to have different
configurations depending on connection speed. Modify the API to reflect
USB Specification requirements on what can (e.g. configurations) and
what cannot (e.g. VID, PID) be speed dependent.
While the class configurations for different speeds are completely
independent, the actual class instances are shared between operating
speeds (because only one speed can be active at a time). Classes are
free to provide different number of interfaces and/or endpoints for
different speeds. The endpoints are assigned for all operating speeds
during initialization.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add necessary macros and convert UAC2 descriptor test from descriptor
blob to descriptor set. Currently there is only Full-Speed descriptor
set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
43de309b3e made a buffer leak.
It was not detected by this test.
Add another configuration, where the final buffer is sent without
fragments in order to exercise the leaky code path.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This is useful if we want to paste a list of multiple command or add
long advertising data for example.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
UART error may be reported with random timing
from either UART in configuration mismatch case.
The test case is now aligned to such behaviour.
Signed-off-by: Bartosz Miller <bartosz.miller@nordicsemi.no>
Added test for archs that support it. It triggers an exception
and verify that the fatal message has stack unwind info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Updates the linker script fragments under 'tests' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Updates the test_ram/test_rom structures to use a 'long' instead
of an 'int' so that the structure sizes will be 4-bytes on 32-bit
platforms and 8-bytes on 64-bit platforms.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The commit sets CONFIG_SOC_NRF_FLASH=n for SPI/QSPI Flash tests
as building internal Flash driver is not needed in these
scenarios.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Some configurations which are not valid for nrf54l15. Mainly those
which are using ENHANCED_POLL_OUT option which is not applicable for
nrf54l15 because it has ENDTX_STOPTX short so PPI connection is not
needed.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Modifying arbitrary delay to cover for receivers with timeout.
Adding a delay between polling and asynchronous checking to cover
for cases when CPU processing is fast enough so that both checks
may overlap.
Allow error code for uart_rx_disable call.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
PM action shall be called from the thread context thus switching to
k_work instead of the k_timer.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
