The upper limit of the timeout should not be 0.
tests/drivers/watchdog/wdt_basic_api checks for this and fails as the
driver currently only checks that the timout does not exceed the upper
bound.
This also makes it check the lower bound, so that the test passes.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
CONFIG_WDT_SAM_DISABLE_AT_BOOT was removed in commit 2e01e86bdc
("drivers: watchdog: wdt_sam: use the generic disable option"), but some
comments still talked about it. Replace it with
CONFIG_WDT_DISABLE_AT_BOOT.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Use the generic option WDT_DISABLE_AT_BOOT instead of the SAM specific
one WDT_SAM_DISABLE_AT_BOOT (note the generic one has been introduced
after the SAM one).
This also have the consequence of changing the default value for yes to
no, fixing the watchdog tests.
Fixes#13290
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
According to the Coverity issue 188890 (github issue #10705)
Fix for overflowed or truncated value count-1U used as return value.
I decided to use a saturating subtract to avoid a vulnerability.
It will always return 0 or bigger value according to the conditions.
Now if count value is 0, function will return 0, not -1 as before.
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
STM32 specific behavior "IWDG_STM32_START_AT_BOOT" is enabled
by default. As all vendor specific behavior, this is preferred
to be disabled by default and activated at application level,
so application can have better control of the driver.
For instance watchdog test can't run with this setting.
Disable by default.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Its been at least 2 releases since we marked a number of watchdog APIs
as deprecated. Lets remove them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The commit 0c2ef4ea3d "drivers:
watchdog: Watchdog API redesign" introduced an API redesign for the
watchdog drivers compliant with Zephyr.
This patch updated the CMSDK Watchdog driver to be compliant with the
new API.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Convert the Atmel SAM0 watchdog driver to the new watchdog API and
enable DTS support.
This fixes#10914.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The majority of bits where already in place, but some minor support
get the driver name from DTS was needed. Now we select HAS_DTS_WDT
for the driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adding watchdog driver for sam SoC. The current implemntation just
diables the watchdog on device boot.
This PR adds the following support for SAM3X, SAM4S and SAME70
1. Activate processor reset
2. Activate all reset
3. Generate interrupt on watchdog timer expiration.
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
patch adds the device binding for qmsi watchdog and device node
for socs which are using wdt qmsi driver.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Migrate from `SYS_LOG` to `LOG` logging mechanism.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
WDT_NRFX is now enabling by default. Its configuration from proj.conf
files was removed.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Bad function calls caused assertion errors in previous implementation.
This change introduces fixes to prevent those errors. In addition
nrfx_wdt_init function is moved to init function calling at the start of
zephyr.
There are additional changes. -EINVAL value is returning in install
function when watchdog timeout value is invalid (less or equal minimum
or greater than value supported by watchdog peripheral in Nordic's SoCs.
Additionaly condition to chech if low frequency clock is enabled was
removed. Watchdog peripheral requests LFCLK in hardware.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
New nrfx version brings fixes also in watchdog implementation.
Previously introduced workaround for supporting more than one channel
can be changed to driver-management solution.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Each driver seemed to use their own Kconfig option to set the name for
their drivers. This makes writing example/test code difficult as each
one of them will have to special case for each of the supported
platforms.
Use a consistent CONFIG_WDT_0_NAME option in all drivers.
Fixes#8094.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Instead of relying on CONFIG_WDT_ESP32_DISABLE_AT_BOOT, use
CONFIG_WDT_DISABLE_AT_BOOT that's available for all watchdog timers.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The Kconfig IWDG_STM32_START_AT_BOOT is actually not used and the
watchdog is enabled unconditionnally at init.
Enable the watchdog only if CONFIG_IWDG_STM32_START_AT_BOOT is set.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
New API enables setting watchdog timeout in the unit of microseconds.
It is possible to configure watchdog timer behavior in CPU sleep state
as well as when it is halted by the debugger.
It supports watchdogs with multiple reload channels.
Jira: ZEP-2564
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Also provide their prototypes in `soc.h`. This should help
readability, since some ROM functions, with their names as provided by
Espressif, have sometimes the same prefix as Zephyr APIs.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
