Add information about the IPv4 multicast IP_ADD_MEMBERSHIP and
IP_DROP_MEMBERSHIP socket options.
Add information about the IPv6 multicast IPV6_ADD_MEMBERSHIP and
IPV6_DROP_MEMBERSHIP socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add information about IPv4 TTL and IPv6 hoplimit changes
for unicast and multicast packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add information about IPv4 TTL and IPv6 hoplimit changes
for unicast and multicast packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
native_sim is superceeding native_posix.
Let's recommend users to use it instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These were first deprecated in v3.2. We have kept support for them
for as long as we can, but now their presence is causing CI failures
in some configurations. Specifically, using the deprecated 'label'
property is causing a warning which is promoted to an error in some
twister runs. This is blocking other forward progress in the
devicetree API.
I tried to rework the tests to avoid this, but it was too much effort
for the time I had to work on the task. Removing the APIs is therefore
unfortunately the best way forward to unblocking other work.
Re-work the test suite a bit to maintain coverage where we are using
the label property to test other macros.
Add a migration guide section to help with the transition.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
Note that native_sim is replacing native_posix as default
test platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This allows HCI drivers to expose vendor-specific functions to set the
public address.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Added note about the migration steps needed to support the new IGMP api.
The api now expects an additional argument used for joining an IGMPv3
group.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
The Bluetooth Mesh ``element`` declaration has been changed to add
prefix ``const``. The ``elem->addr``field has been changed to the
new runtime structure, replaced by ``elem->rt->addr``.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Statically initialise the callback list so that subscriptions can be
registered before the call to `bt_enable`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Rename the lorawan_set_battery_level_callback to
lorawan_register_battery_level_callback to make it consistent with other
functions for downlink and data rate changed callbacks.
Also making the function void for consistency. The get_battery_level
already checks if the callback is NULL before invoking it.
Signed-off-by: Martin Jäger <martin@libre.solar>
Add a note to the 3.6 migration guide about the CoAP API changes
introduced with the CoAP server subsystem.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Adds a note about how to replicate the functionality of the now
removed MCUboot mass erase Kconfig option
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add in DT the possibility to configure both INT1 and INT2
pin. The driver will then assign one of the two (either 1
or 2, according to what value drdy_pin is set) to a gpio
for receiving drdy interrupts.
The other pin may be used in the future to receive event
interrupts.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Adds a note that an additional Kconfig needs to be selected if a
serial MCUmgr transport is used
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Zephyr 3.5 as a supported release until July 26th 2024, i.e. when
3.7 is planned to be released.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add note to migration guide describing how to instantiate a ramdisk
using devicetree, and calling out Kconfig options that have been removed
with this change
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add migration guide notes for i.MX RT boards, including the following
changes:
- i.MX RT boards must now manually enable
CONFIG_DEVICE_CONFIGURATION_DATA and CONFIG_NXP_IMX_EXTERNAL_SDRAM
when required
- SNVS pin names have changed for i.MX RT11xx series boards
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
