This commit modifies the I2S driver to work for STM32H7
family of MCU's. Currently only TX is working.
Tested on nucleo_stm32h743zi. Requires dma1 & dmamux1 to be enabled.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make use of positive status values in the DMA callback to pass
info to the DMA client after a successful DMA operation.
A completed DMA transfer uses the status 0 while a reached
water mark uses the status 1.
Signed-off-by: Cyril Fougeray <cyril.fougeray@worldcoin.org>
Remedial rework to handle the enabling of the I2S master clock
output based on the presence of an introduced DT property.
For details see issue/54841.
Signed-off-by: Raul Pando <raul.pando@bytegrity.co.uk>
Minor rework to perform the PLLI2S VCO computations in floating point as
per the original seemingly intent.
Signed-off-by: Raul Pando <raul.pando@bytegrity.co.uk>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PINCTRL_DT_(INST_)DEFINE macros already defined the trailing ;,
making its usage inconsistent with other macros such as
DEVICE_DT_DEFINE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
All the macro for dma-cells are now in the
include/drivers/dma/dma_stm32.h header file.
So the include/dt-bindings/dma/stm32_dma.h is no more
useful and removed from #include.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Since we removed various series headers, move stm32 driver
under main driver/pinmux folder.
Take this change into account into various drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The i2s_config structure passed to the i2s_configure() function is
not supposed to be modified by the driver. Similarly, the structure
returned by the i2s_config_get() function is not supposed to be
modified outside the driver.
Decorate the pointers to those structures with the const qualifier
and correct one driver that actually modified the structure passed
to i2s_configure().
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Introduce a new enumeration value that allows setting configuration
and triggering commands for both I2S streams simultaneously.
Such possibility is especially important on hardware where the streams
can be only enabled/disabled (but not started/stopped) independently,
like it is in nRF SoCs.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Replace individual device instance definitions with the macro that
expands to the equivalent change.
F='struct device DEVICE_NAME_GET'
git grep -l "$F" \
| xargs sed -i -r \
-e "s@$F"'\(([^)]*)\);@DEVICE_DECLARE(\1);@'
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Port the I2S and DMIC drivers to the new timeout API so that they do
not need to enable legacy timeouts.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The macros should have been DMAS_CELL_ not DMAS_CELLS_ as this matches
the other devicetree macro naming convention.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some external audio devices require a master clock to be provided by
the I2S peripheral to work correctly. To allow for the operation of
these devices the master clock output should always be enabled when in
master mode.
Specific applications requiring this signal to be output can configure
the desitnation pin via the pinmux driver.
Signed-off-by: Abe Kohandel <abe@electronshepherds.com>
When configuring the I2S peripheral as a master, the DMA channel
direction must be configured to transfer data from memory to the
peripheral.
Currently the configuration of channel direction is always set for
peripheral to memory regardless of whether it is the TX or the RX
channel.
Signed-off-by: Abe Kohandel <abe@electronshepherds.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
`block_count` in `dma_cfg` is described as how many bytes to be
transfered in dma.h. So it should be 2 since the source data size
and dest data size are all 16 bits in this application. And all
block size should represent just bytes.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
the old DMA driver used to use 1 to stand for 16 bits, while the
new driver uses 2 to stand for 16 bits, which means the
'source_data_size' and the 'dest_data_size' should be 2.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
This commit moves DMA parameters previously hard coded in the driver
to the dts.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
src_addr_increment, dst_addr_increment, fifo_threshold and priority
are missing as parameters for configuring DMA. This commit adds them
to the driver.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
The i2s driver assumes the tx channel and rx channel of dma are using
the same dma controller. This commit changes it to be able to use
different dma controllers.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
