In order to be able to run the sanity check, don't open the socket
if the test protocol is enabled.
Also add a debug print at the recv().
This commit will be dropped:
- As soon as the sanity check site accomodates
- As soon as the integration is complete
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Add documentation for the Websocket API, also add information how
to use the Websocket as a transport for other high level protocols
like MQTT.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Applications should use setsockopt() to setup the SOCKS5 proxy,
so the old API file, which is using net_context directly, is
moved SOCKS5 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix GCC "warning: 'ipv4' defined but not used [-Wunused-variable]" and
"warning: 'ipv6' defined but not used [-Wunused-variable]" when either
IPv4 or IPv6 support is not enabled.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Updated mbedtls reference to take in:
native: debug: Set speed optimization if ASAN is used
(zephyrproject-rtos/mbedtls#4)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Use sys_put_xyz() helpers instead of memcpy() whenever possible. This
brings in straight-line inline code for pushes and adds of known,
small sizes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In some applications where power management is used, it is not expected
that the GPIO pins of the UARTE is reconfigured upon power state change.
Added a Kconfig option to disable the UARTE driver management of GPIOs.
It defaults to y in order to not affect current behavior unless the user
configures it specifically.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the comment in #20008 I found out that some test cases
for different tests have same names.
To get rid of it, I decided to change test cases names.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The page tables to use are now stored in the cpuboot struct.
For the first CPU, we set to the flat page tables, and then
update later in z_x86_prep_c() once the runtime tables have
been generated.
For other CPUs, by the time we get to z_arch_start_cpu()
the runtime tables are ready do go, and so we just install
them directly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Bring in CONFIG_X86_MMU and some related defines to
common X86 Kconfig
- Don't set ARCH_HAS_USERSPACE for intel64 yet when
X86_MMU is enabled
- Uplevel x86_mmu.c to common code
- Add logic for handling PML4 table and generating PDPTs
- move z_x86_paging_init() to common kernel_arch_func.h
- Uplevel inclusion of mmustructs.h to common x86 arch.h,
both need it for memory domain defines
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Same snippet as in our 32-bit linker file. Creates
an iterable section with all the MMU_BOOT_REGION() info.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some linker symbols indicating the bounds of various memory
areas needed for setting up boot MMU regions are now in
place.
MMU_BOOT_REGION macros added to align the bounds of these
sections if we're using runtime page tables.
_image_rodata_start moved to the proper place, it was not
accounting for the rodata sections specified in
linker/common_rom.ld.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Program text, rodata, and data need different MMU
permissions. Split out rodata and data from the program
text, updating the linker script appropriately.
Region size symbols added to the linker script, so these
can later be used with MMU_BOOT_REGION().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
can_copy_zframe_to_frame did not distinguish between the standard and
extended frames. As a result, uninitialized bits were copied to the
destination frame. This commit changes the function to use the correct
bitfields.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Since the LE (Enhanced) Connection Complete that comes as part of
cancelling a connection does not come through the priority rx thread in
hci_driver.c, the event class was not being calculated and cached.
Hence, calculate and cache the class whenever an event is received as
part of invoking a command.
Fixes#20110.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Unused since commit 7e96ca5d80 ("i2c: Remove non DTS Kconfig params").
intel_s1000_crb probably isn't getting tested in CI, because Kconfiglib
generated a warning for the symbol no longer being given a type, which
would be turned into an error.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make the clkout properties of the NXP Kinetis SIM module device tree
bindings optional since not all boards rely on this clock signal for
clocking external peripherals.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Same deal as in commit 7fdb525754 ("kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), but I hacked Kconfiglib to also
find cases where the type is given separately as e.g.
config FOO
int
default 3
Motivation (from a note in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html):
For a symbol defined in multiple locations (e.g., in a
Kconfig.defconfig file in Zephyr), it is best to only give the
symbol type for the "base" definition of the symbol, and to use
'default' (instead of 'def_<type>' value) for the remaining
definitions. That way, if the base definition of the symbol is
removed, the symbol ends up without a type, which generates a
warning that points to the other definitions. That makes the extra
definitions easier to discover and remove.
It's also nice if 'def_bool' and the like turn into a semi-reliable flag
that the symbol is only defined in Kconfig.defconfig files. That might
be a sign that things could be cleaned up.
Will do a separate pass later to remove some symbols only defined in
Kconfig.defconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds a new test suite in tests/arch/arm that
intends to testing system faults inside interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For ARM, Z_ARCH_EXCEPT triggers an SVC to induce a system error.
This code block may be inlined, so, if we want to return from
this error DIRECTLY to thread mode, e.g. if the system error
occurred in ISR context and we are not aborting the current
thread, we must instruct the compiler that the execution
may continue after the inlined SVC. Therefore, we must remove
the CODE_UNREACHABLE statements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In z_fatal_error() we invoke the arch-specific API that
evaluates whether we are in a nested exception. We then
use the result to log a message that the error occurred
in ISR. In non-test mode, we unconditionally panic, if
an exception has occurred in an ISR and the fatal error
handler has not returned (apart from the case of an
error in stack sentinel check).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add an ARM internal API which allows the kernel to
infer the execution mode we are going to return after
the current exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce a Kconfig option to signify whether
an Architecture has the capability of detecting
whether execution is, currently, in a nested
exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We re-implement the z_arch_is_in_isr function
so it aligns with the implementation for other
ARCHEs, i.e. returning false whenever any IRQ
or system exception is active.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors and cleans up __fault, so the function
- reduces to supplying MSP, PSP, and EXC_RETURN to the C
function for fault handling
- simplifies itself, removing conditional
implementation, i.e. based on ARM Secure firmware,
The reason for that is simple: it is much better to write the
fault handling in C instead of assembly, so we really do only
what is strictly required, in assembly.
Therefore, the commit refactors the z_arm_fault() function
as well, organizing better the different functional blocks,
that is:
- unlocking interrupts
- retriving ESF
- asserting for HW errors
- printing additional error logs
The refactoring unifies the way the ESF is retrieved for the
different Cortex-M variants and security execution states.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add some documentation for ARM-specific function
z_do_kernel_oops, stating clearly that it is only
invoked inside SVC context. We also comment on
the validity of the supplied ESF.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a useful inline comment in the SVC handler (written in
assembly), which identifies one of the function return points
a bit more clearly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the documentation that incorrectly says that DT uses
Kconfig. DT no longer has access to Kconfig symbols.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove the common.dts file which has been used for a year.
common.dts at one point allowed us to conditionally add an MCUBoot
overlay based on Kconfig.
but since DT lost access to Kconfig options it has been unused.
The overridable variable DTS_COMMON_OVERLAYS, which by default points
to common.dts, is also unused in-tree, and any out-of-tree usage can
be ported over to use DTC_OVERLAY_FILE instead, so we remove the
variable as well.
This simplifies the configuration system.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
