not all distributions install python3.8 libraries as a part of the
python3 package. Specifying the python3.8 library solves this problem.
Signed-off-by: Zach Hudson <zhudson@phytec.com>
Update ci and docs to reference SDK 0.12.3. Update to SDK 0.12.3 as
it includes fixes for support ARM Cortex-M55.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Homebrew now uses bash instead of Ruby to install itself. Use the
recommended command instead of the old one.
Fixes#30037.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The debugging section was generalized for flash and debugging tools.
The links were refactored accordly and all references were updated.
To be consistent, the directory doc/guides/debbugging was renamed to
doc/guides/flash_debug.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The introduction page lists all the architectures supported by Zephyr.
Now that SPARC V8 support has been merged, add it to the list. Also list
it in the set of architectures supported by the SDK.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
How-to guide has 0.11.3 SDK
Replace with the latest one SDK 0.11.4 in the documentation
description and links.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This commit updates the documentation so that it no longer requires
ZEPHYR_SDK_INSTALL_DIR and ZEPHYR_TOOLCHAIN_VARIANT to be used when
using the Zephyr SDK.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Linux distro might not have a python3-dev package installed by default,
which will give an error during Python dependencies installation.
Closes#25128.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@gmail.com>
Various commands are getting put into their own sections when they are
really just steps along the way towards getting zephyr and installing
Python dependencies. Group them together in a section by that name,
moving the west install step there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Strip out text that isn't needed to try to minimize the GSG's length.
Fix up some grammar nits.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The command-line is correct but specifies a particular release, which
may be out of date, and is not formatted as a URL that can be clicked.
Add a proper link.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit changes the current boilerplate include description and
instead describes the use of find_package(Zephyr)
It also add a section covering additional possibilities when using
find_package(Zephyr).
- Search order
- Zephyr repository application description
- Zephyr workspace application description
- Zephyr freestanding application description
- Environment ZEPHYR_BASE setting
- Multiple Zephyr and preference setting
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Document the changes to the generated node macros in macros.bnf,
moving the old file to legacy-macros.bnf and putting it in its own
section.
The actual generated macros are now a low-level detail, so rewrite the
foregoing sections as examples in terms of the new <devicetree.h> APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a warning about the Gatekeeper issues that Catalina introduces in
the section about GNU Arm Embedded.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the
duplicate that existed in installation_win.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The GSG already includes the setup instructions. Remove the duplicate
that existed in installation_mac.rst.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Describe how to work around the Gatekeeper enforcement of security
policies in apps launched from the Terminal.
Fixes#23168.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a note that describes the fact that blinky does not run on all
boards supported by Zephyr, and propose an alternative (Hello World) for
those boards.
Fixes#23169.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since the latest version available for download works well, there is no
reason anymore to warn the users about a particular, older toolchain
version not working correctly on Windows.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Several users have noticed that the SDK version in the GSG is outdated.
Update it to the latest, 0.11.2.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The one page on devicetree is too long. Split it into multiple pages
to make it easier to digest and more squintable. This is basically
just moving content around; minimal changes have been made apart from
redoing some transitions and adding a couple of introductory paragraphs.
Rename the 'device-tree' Sphinx :ref: target while we are here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In the section 'Documentation presentation theme' put a reference to
'install_py_requirements' section in the getting start guide.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For some time now we are building also the C++ samples in
native_posix in CI.
For those who want to run the whole suite locally, they
require g++-multilib, which was missing in the Ubuntu list
=> Add it.
Similarly the display sample is built in CI for
native_posix64, so add the 64bit SDL dev library to both
the Ubuntu and Fedora lists.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add information about the minimum Python version to the advanced Linux
documentation.
Drop 16.04 from the GSG since its system Python 3 is no longer covered
by these instructions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The numbered list for installing toolchains on macOS and Windows is not
formatted correctly.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
In getting started, in case of macOS and Windows, the need to set
zephyr specific environment variables is only specified several links
away from the getting started, which can be easily missed for someone
who already has the toolchain installed. So just remind the user.
Signed-off-by: Laurent Meunier <laurent.meunier@st.com>
As presented to the TSC, Zephyr's out-of-box experience for new
developers is, well, complicated. A number of suggestions were
presented including simplifying the getting started material to present
a straight-forward path through the setup and installation steps through
to getting a sample application built, flashed, and running.
This PR is a work-in-progress towards addressing this OOB experience
with a minimal-distractions version of the GSG. Alternatives, warnings,
and material that could lead the developer astray were moved to
alternative/advanced instruction documents (based on the previous
separate Linux/macOS/Windows setup guides) and a new "Beyond the GSG"
document.
We do take advantage of a sphinx-tabs extension for synchronized tabs to
present OS-specific instructions: clicking on one tab will display all
same-named tabs throughout the doc.
We hope (and will continue evaluating) that this new GSG gets developers
set up quickly and then we can send them along to other documents to
continue learning about Zephyr and trying other sample apps.
Thanks for all your previous feedback that I've worked
into this new version.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In order to use clang it is necessary to set the variable
ZEPHYR_TOOLCHAIN_VARIANT to llvm instead of clang.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The project's README.rst references the support board docs with an URL
that's not working these days (see
https://github.com/zephyrproject-rtos/infrastructure/issues/134) so fix
that URL reference. While looking for other similar linking cases, I
found a hard URL references that should be using :ref: role, and a
release notes reference to a (now) broken link (fixing that in the
/latest/ version of the 1.10 release notes).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Instead of having a mix of west and CMake/ninja instructions for
building and flashing, document it using only west. This will help
clarify that west is the default build tool in Zephyr and should also
reduce confusion over what tool to use.
Note that the biggest change is changing the default in
doc/extensions/zephyr/application.py for :tool:, from all to west.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add comment for the setup failure.
The solution can be infered from ARMmbed/cmsis-pack-manager#97
Fixes#18269.
Signed-off-by: Chen Guokai <1415430544@qq.com>
For users that have an older version of west already installed, it is
useful to include `-U` in the getting started guide, otherwise the
instructions will fail to work depending on the state of the machine.
Fixes#18132
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The main change is the elimination of the bootstrapper, a design flaw
/ misfeature.
Update the documentation to be compatible with the 0.6.x releases as
well. This has to be done atomically, as there were incompatible
changes. Make use of the versionchanged and versionadded directives
to begin keeping track of how these APIs are evolving.
(Note that west 0.6.0 will remain compatible with the extension
commands in Zephyr v1.14 LTS as long as that is still alive. This
change is targeted towards Zephyr 2.0 users.)
This requires a bump in the shippable container and allows us to
simplify the west_commands test procedure.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This toolchain is no londer supported or needed. It was used to build
configurations that are now being removed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
