For flash device, littlefs should be located at the partition.
Current implementation of the fs shell is hardcoded for the flash device
and the compilation fails if STORAGE_PARTITION isn't defined in the
device tree.
Add options for block dev support. This allows to mount littlefs on the
block device from the shell, and also removes the compile time
dependency on STORAGE_PARTITION, if CONFIG_FS_LITTLEFS_BLK_DEV is set.
Fix mounting of littlefs blk device. lfs_mount stucks in case when the
read/prog buffer less than SDMMC block size, because it can cause memory
corrupt, for example, look into function 'card_read_blocks' how it writes
data to read buffer in case when buffer isn't aligned. With default
config we have 32 bytes in the read buffer but trying to write
'block_size' to it and get memory corrupt, the same issue will be in
case when the read buffer is aligned.
This is an incremental improvement, ideally, someone should implement
selection of the storage dev from the shell args.
Co-authored-by: Mykola Kvach <mykola_kvach@epam.com>
Signed-off-by: Dmytro Semenets <dmytro_semenets@epam.com>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds an optional shell command for testing the speed of the flash
device and file system, which outputs a rough speed for reading a
file.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds an optional shell command for testing the speed of the flash
device and file system, which outputs a rough speed.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix compilation error for devices where ssize_t can not
be formatted with %d, due to ssize_t not being equal int.
Fixes#39629
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add __printf_like modifier to validate strings used by shell.
Fixing warnings triggered by this change.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There is '%u' and '%d' in format message, while there is only one
argument (besides format string). Remove ununsed '%u' to stop printing
garbage.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The cmd_write and cmd_ctunc have been opening/creating file for
read/write operation.
The commit changes cmd_write to open/create file for write only,
and cmd_trunc to only open file for write.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The cmd_read function uses fs_open with FS_O_CREATE | FS_O_RDWR flags
to open file it will only read; the flags has been changed
to FS_O_READ.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The fs_open has been extended with support for open flags.
Currently supported flags are:
FS_O_READ -- open for read
FS_O_WRITE -- open for write
FS_O_CREATE -- create file if it does not exist
FS_O_APPEND -- move to the end of file before each write
The FAT FS and LittleFS front-ends within the Zephyr has also been
modified to utilize the flags.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
NFFS is removed as it has serious bugs (by design) which haven't
been resolved since extended range of time.
One of most serious issues bunch were described here:
https://github.com/apache/mynewt-nffs/issues/10
Since lack of support NFFS upsterem it doesn't make sense to keep
it in zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The previous way of creating an absolute path relied on snprintf(), and
when used with newlib gcc warned that the output could be truncated
before the last format character. Rework to use code that doesn't rely
on snprintf.
See discussion at https://bugzilla.redhat.com/show_bug.cgi?id=1431678
Also ensure that cwd is always NUL-terminated, and use the utility
function to create the absolute path in cmd_trunc.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for the littlefs file system in the fs shell. Update
the sample to use the same partition configuration as the littlefs
example for the SPI NOR test platform.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Inside cmd_read(), result of fs_seek() is not checked which might
result in reading the wrong part of file. So fails the read if
fs_seek() fails.
Fixes#13862
Fixes CID-190953
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
With the introduce of VFS the typedef for fs_file_t & fs_dir_t don't
exist anymore so we need to use 'struct fs_dir_t' or 'struct fs_file_t'.
Fix up some places that got missed in the VFS conversion.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add following commands to fs shell:
- rf <filename>
- read <filename> [<offset> [<length>]]
- write <filename> [-o <offset>] <byte1> [<byte2> ... [<byteN>]]
- trunc <filename> [<length>]
For writes without offset specified, new data is appended to file.
For truncaces without length specified, 0 is default value.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch moves code to create absolute path of file/directory to
separate helper since the same code is used in few places.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a simple shell that allows exploring the contents of the file
system.
Jira: ZEP-1235
Change-Id: Iaa49f0be18980dd740e9552ddf4761196a818884
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
