As of January 2020, David is no longer working on the Zephyr
documentation, so he should not be automatically added as reviewer.
I've commented out rather than removed the lines so when a replacement
is found, the lines can easily be added back.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add driver for the Texas Instruments LMP90xxx series of multi-channel,
low-power 16-/24-bit sensor analog frontends (AFEs).
The functionality is split into two drivers; an ADC driver and a GPIO
driver.
Tested with LMP90080 and LMP90100.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
PWM driver for LiteX SoC builder was created.
Because LiteX supports only one channel for each PWM device,
an appropriate restriction was made.
Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This adds I2C bitbang driver for LiteX SoC builder with its bindings.
Signed-off-by: Robert Winkler <rwinkler@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This adds PRBS ranom number generator driver for
LiteX SoC builder with its bindings.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This adds support for the EC (embedded controller) on a Google
reference board with codename "kukui". This board uses the STM32F098RC
chip. We built an application for the board and verified UART
functionality on the board.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Pattern being <domain>_<model>.<c/h>.
Here interrupt_controller as a domain would be far too long so
shortening it to "intc", as DTS does actually.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
wdt_install_timeout() was skipped as it installs an ISR-context
callback handler function. The rest are simple wrappers.
Added myself as the maintainer of the syscall handlers. WDT
subsystem appears to not currently have an owner.
Fixes: #21432
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
net/lib/config/ is important generic part of the network stack, and
should be reviewed by the same people as net/lib/. (Besides, I
originally factored out this lib in the first place.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added leak suppression, by implementing __lsan_default_suppressions
function, for SDL2 and X11 library which are used by the SDL display
driver.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
gen_syscall_header.py is not longer necessary, it was just creating a
file including syscall.h. This header is now included directly by
gen_syscalls.py.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Szymon was removed from all Bluetooth paths a while ago, and this is
simply an overlooked leftover.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
/lib/libc/ was listed twice in the file
The first entry was overriden by the 2nd
And so was the case for
/samples/bluetooth/
In this second case, the override lost a user, so add it
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
There were two conflicting entries for sensor samples, which resulted in
the wrong person getting assigned as a reviewer.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add API for accessing Electrically Erasable Programmable Read-Only
Memory (EEPROM) devices.
EEPROMs have an erase block size of 1 byte, a long lifetime, and allows
overwriting data on byte-by-byte access.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This adds supoprt for the Atmel SAME54 SoC.
The SAME5x/SAMD5x is a line of Cortex-M4F MCUs that share peripherals
with the sam0 Cortex-M0+ and saml1x Cortex-M23 parts.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Add myself to owner of subsys/logging/log_backend_net.c so
that if there are changes to that file, I get notified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds driver support for DMA on f0/f1/f2/f3/f4/l0/l4
series stm32.
Notice due to some bugs, this is currently not working with f7.
There are two kinds of IP blocks are used across these stm32, one is the
one that has been used on F2/F4/F7 series, and the other one is the one
that has been used on F0/F1/F3/L0/L4 series.
Memory to memory transfer is only supported on the second DMA on
F2/F4 with 'st,mem2mem' to be declared in dts.
This driver depends on k_malloc to allocate memory for stream instances,
so CONFIG_HEAP_MEM_POOL_SIZE must be big enough to hold them.
Common parts of the driver are in dma_stm32.c and SoC related parts are
implemented in dma_stm32_v*.c.
This driver has been tested on multiple nucleo boards, including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/L073RZ/L476RG with the
loop_transfer and chan_blen_transfer test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Add shell commands for setting PWM period and duty cycle (in cycles,
microseconds, or nanoseconds).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
1) Add cryptographically secure random functions to provide
FIPS 140-2 compliant random functions.
2) Add name to random function choice selectors to ease
selection in SOC .defconfig files
3) Add bulk fill random functions.
Signed-off-by: David Leach <david.leach@nxp.com>
Add SPI driver and bindings for LPSPI peripheral for the RV32M1 SOC.
Based heavily on the existing mcux LPSPI driver.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Not a top-level zephyr core API and tied to third party environment, so
move it to where the code is in lib/updatehub.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Charles Youse (@gnuless) has left the organization. I will be
taking over most of his areas of ownership, with Daniel minding
the DW I2C driver.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Script to be used when creating a release. For regular releases this can
be called this way:
$ list_issues.py -f issues.md -s 2019-09-01
Will list all closed issues since september 1st, 2019 and will create a
markdown file with all issues that can be added as is to the release
notes.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The valgrind suppression file did not have an owner
That file is only usefull for POSIX arch based boards
=> Adding myself as owner of the file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Reimplementation of clock control driver for nrf platform. It includes
latest API changes: asynchronous starting and getting clock status.
Additionally, it implements calibration algorithm which optionally
skips calibration based on no temperature change. Internal temperature
sensor is used for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
