`samples/net/wifi` replaces custom esp32 wifi sample
code. Then it can be removed from main repository.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Moved all MBEDTLS dependencies from prj.conf
to Kconfig as WiFi depends on it.
Update esp32 wifi driver to enable `samples/net/wifi`
to work. Commands as such as `wifi connect` and `wifi scan` are now
available.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This PR adds a `*_cli_*` infix to the Config Client API to match
the changes in Health Client. The old API is marked as deprecated.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
This header is also needed for struct can_filter, so it should not
only be included if one wants to set the device into loopback mode.
Signed-off-by: Martin Jäger <martin@libre.solar>
https://github.com/zephyrproject-rtos/zephyr/pull/49068 fixed units
displayed by the sample from dps to rad/s but did not update the
sample twister regex filter.
Fix the filter as well to allow testing in CI.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32 PM serial wakeup sample, a power efficient configuration using
lpuart is provided for stm32l562e_dk target.
Though, since default configuration of the board is using ST-Link virtual
port com on uart1, which can't be changed in CI and hence can't be tested,
then remove this target from sample yaml configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
add user data for adu callback, which helps in passing
socket and relevant application parameters.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
-In order to allow non regression of trigger mode in CI, add
a dedicated configuration for this mode
-Fix regex
-Use a filter on compat rather than using a fixture
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We auto-generate DT_COMPAT_<compat> defines so we dont need to
explicitly define them anymore.
NOTE: we need to source Kconfig.zephyr first to pull in the autogen
Kconfig.dts files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that Wifi drivers are enabled based on devicetree we can
remove any cases of them getting enabled by *.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Zephyr IEEE 802.15.4 drivers and L2 stack use the same constant names
for different MTU definitions. The intent of this change is to introduce
a consistent MTU definition which can be used everywhere in zephyr to
avoid confusion, bugs and name conflict.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Remove the custom Kconfig value for CONFIG_SHELL_ARGC_MAX as it is too low
to account for the new arguments to the "can send" shell command.
The default for CONFIG_SHELL_ARGC_MAX was increased to 20 in
32ebeb0a5c which is sufficient for sending
non-CAN-FD format frames using the new "can send" shell command.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Now that crypto drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Samples testcases should start with 'sample'. Some testcases
start with 'samples'.
This commit rename these testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
Some test cases in the module `samples` have not a name of this module.
This change adds the name `sample` to these test cases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
SoF pins threads to specific cores and don't need them to be executed in
multiple cores. This options allows Zephyr to do cache optimizations
during context switches.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This is a simple example of fuzz test integration with Zephyr apps
that displays LLVM libfuzzer's most important feature: it's ability to
detect and explore deep and complicated call trees by exploiting
coverage information gleaned from instrumented binaries.
See README.rst and the inline comments for details
Signed-off-by: Andy Ross <andyross@google.com>
Now that usb device drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Signed-off-by: Kumar Gala <galak@kernel.org>
Since the change in the PR #49167
samples: boards: stm32: serial_wakeup: fix device usage issues
the sample should not check the "Device ready" anymore
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit retrains the power management testcase
tests/samples/boards/stm32/power_mgmt/serial_wakeup
to bun on stm32 boards only.
Limiting first to nucleo_wg55 and stm32l562dk targets,
more to be added.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Refactor the observer sample so that it can be reused as
bsim test to verify Extended advertisement chaining.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the broadcaster multiple sample so that it can be
reused as bsim test to verify Extended advertisement
chaining.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to Observer sample so that when
Extended Advertising feature is enabled, it can receive
Extended Advertising Reports, and hence receive long AD
data from peer Extended Advertising Broadcaster Multiple
sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The old project, liblc3codec, is not used anymore. Rename the Zephyr
module name, folders, and Kconfig options based on the new name, liblc3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When no hardware device is available, set WDT_NODE to DT_INVALID_NODE.
Also switch to a single initializer using DEVICE_DT_GET_OR_NULL so that
we can constify the pointer.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change creates an overlay file so that the adc sample
is running on the nucleo_u575zi_q board.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Change implementation of cte_recv_cb to print information about IQ
samples type. The changed code is ready for use of 8 bits and 16 bits
signed integer IQ samples. User has sample level option to enable
printing IQ samples.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Toward deprecated DT_LABEL() macro, replace the handful of cases
that use DT_LABEL(node) with DT_PROP(node, label).
Signed-off-by: Kumar Gala <galak@kernel.org>
Some platforms have the possibility to cancel the powering off until the
very latest moment (for example if an IRQ is received). Deal with this
kind of failures.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Setting CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT here is unnecessary
as the value needed is equal to the default.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
The function will be used to update the RSI value. The returned value
can be later used in advertisement data for set identification. This
removes the need of specific bt_csis_advertise function so that the user
can call the API to generate new RSI once needed (e.g. on RPA change).
This allows the user to manage the advertisement data to fit it's needs.
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Disabled (0x00)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 33
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x1d
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Unknown EIR field 0x2e: 16e61d64dc45
Name (complete): audio test shell
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
Advertising handle: 0x00
Advertising random address: 4E:21:29:F8:94:93 (Resolvable)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x00
Duration: 0 ms (0x00)
Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
LE Set Extended Advertising Enable (0x08|0x0039) ncmd 1
Status: Success (0x00)
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Test effectively requires a microchip,xec-ps2, but it was "optional"
even though the test continued setting up a callback that makes use of
the device.
- Improve test filtering so that it requires a valid compatible to be
enabled (allows to delete redundant ps2 tag)
- Initialize device at compile time (allowing to constify its pointer)
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Require peci-0 alias (test without it is pointless)
- Initialize peci device at compile time
- Filter depending on alias
- Remove redundant peci tag
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Device ready check was wrong (< 0 ?!), so fix it. Also drop static
qualifier for the device variable (not needed) and initialize at
definition time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the can_state enumerations to contain the word STATE to make their
meaning more clear:
- CAN_ERROR_ACTIVE => CAN_STATE_ERROR_ACTIVE
- CAN_ERROR_WARNING => CAN_STATE_ERROR_WARNING
- CAN_ERROR_PASSIVE => CAN_STATE_ERROR_PASSIVE
- CAN_BUS_OFF => CAN_STATE_BUS_OFF
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The test case "samples/boards/mec15xxevb_assy6853/power_management" could
always pass until commit 5f60164 was merged in. This patch changes the sem
take timeout value from 50ms to forever of the log thread, it will make the
idle thread run longer and takes more stack memory. Analyzed the coredump
of the failed test case, it can be found that the test case stucks at
z_idle_stacks. The test case used default CONFIG_IDLE_STACK_SIZE = 256 in
kernel/Kconfig, now we increase the value to 512 in prj.conf for this test
only. With this change, the test case can pass with the commit of 5f60164.
Fixes#47987
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
When coverage is enabled, some boards require more stack space
for the custom threads created in main(). Since this "samples"
already has CONFIG_TEST enabled, we can pad the stack size
with CONFIG_TEST_EXTRA_STACK_SIZE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Updates tflite-micro sample hello_world to use CMSIS-NN optimized
kernels. This is also documented in the corresponding README file.
Signed-off-by: Måns Nilsson <mans.nilsson@arm.com>
Decouple the zephyr/net/socketcan.h and zephyr/drivers/can.h header files
by moving the SocketCAN utilities to their own header.
This is preparation for including the SocketCAN types defined in
socketcan.h in a native posix (Linux) SocketCAN driver context without name
clashes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN header from socket_can.h to socketcan.h to better
match the naming of the functionality.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN utility functions to reflect the new naming of the CAN
controller API and SocketCAN API data types.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the SocketCAN data types to "socketcan_*" in preparation of renaming
the low-level CAN controller API data types.
This breaks the naming compatibility with the similar SocketCAN data types
from the Linux kernel, but Zephyr and Linux SocketCAN are not 100%
compatible anyways (only the structure fields are compatible, extended
functionality such filtering, error reporting etc. are not).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The sensor driver API specifies gyroscope units in radians/second, not
degrees/second. Fix the lsm6dso sample application printk string to
display the correct units.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Names of some testcases are duplicated in another files.
This change rename duplicated testcases.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
So far LOG_DBG() was used inside debug hook for mbedTLS library. This meant
that it was hard to distinct log messages by simply looking at the log
level number, even though Zephyr logging subsystem supports colorful logs
depending on log level.
Choose an appropriate Zephyr LOG_*() macro based on log level coming from
mbedTLS library. Remove log level number from formatted log messages, as it
is now redundant.
One controversial thing about this change is that mbedTLS' "2 State change"
log level is mapped to Zephyr's "warning" log level. Those are not really
warnings in real life, but rather informational messages. However, using
"warning" log level for those allows to clearly distinguish between "2
State change" and "3 Informational" debug messages from mbedTLS.
Additionally, mbedTLS debug message implementation does not seem to be safe
to use in production, so keeping in mind MBEDTLS_DEBUG will be enabled just
during debugging phase, printing "2 State change" logs as warnings should
not be a big deal.
Set default MBEDTLS_DEBUG_LEVEL value depending on selected Zephyr logging
module level, so that only single option needs to be configured in
application project.
Remove prompt for MBEDTLS_DEBUG_LEVEL, so that interactively (e.g. via
menuconfig) adjusting MBEDTLS_LOG_LEVEL will always result in automatically
updating MBEDTLS_DEBUG_LEVEL option. This is to prevent so called "stuck
symbol syndrome".
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Explicitly set the newly add public_network and iq_inverted settings
in lora_modem_config in the lora send and receive samples.
Signed-off-by: Tim Cooijmans <timcooijmans@gmail.com>
code to demonstrate the utilization of assymetric
dual core infrastructure based on soft-IPM implementation.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
Partially revert commit 0028e9733295316d152eba07bf56677d83f4b1b5.
Timeout for tests/posix/common must be still increased for slow
platforms (previously was 120 sec).
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
Now that ethernet drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Because 1-wire drivers no longer use depends on serial/i2c, but select
the Kconfig for the bus they depend on, several overlays can be removed.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Now that video drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that audio drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update lvgl for devicetree updates to use zephyr,keyboard-scan.
Remove Kconfig symbol (LV_Z_POINTER_KSCAN_DEV_NAME) that don't exist
anymore since these values are coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Introduce zephyr,keyboard-scan chosen node property to point to the
node that implements the default KSCAN device. This is similar to
the zephyr,display property.
We switch over the samples to utilize the new property instead of
kscan0 alias.
Signed-off-by: Kumar Gala <galak@kernel.org>
espi saf node is not enabled in mec15xxevb_assy6853.dts so the sample
will fail to build. For now disable CONFIG_ESPI_SAF to get the sample
to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
Now that eeprom drivers are enabled based on devicetree we can
remove any cases of them getting enabled by proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a sample to demonstrate use of (LP)U(S)ART with wakeup capability
This sample is provided with 2 configurations
- nucleo_wb55rg: Basic configuration that could be exercised in CI
- stm32l562e_dk: "Full feature" configuration that require some set up
configuration (be able to display console from lpuart) and allows to
achieve lowest power consumption.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Although it is possible to simply use the interface number,
it has proven convenient to use the names for the interfaces
in the samples.
Migrate to DEVICE_DT_NAME().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adding configuration to run the watchdog sample application
on the stm32 boards through 2 common overlay files:
one for running on the IWDG one for WWDG, if compatible.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Having the LED device enabled in devicetree will now get the driver
enabled by default when CONFIG_LED=y is set. So we can remove
setting driver enabling Kconfig values in various .conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Enable Zephyr device runtime power management mechanisms in Intel SSP
driver. This allows Zephyr to track usage reference for power
domain gating.
Signed-off-by: Krzysztof Frydryk <krzysztofx.frydryk@intel.com>
All IEEE 802.15.4 tests/samples use DT-based filter now, so the
ieee802154 tag can be deleted.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove usage of CONFIG_NET_CONFIG_IEEE802154_DEV_NAME as it now works
with DT based choice.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove Kconfig choice for IEEE802154. In this case, there's no in-tree
board, so there's no overlay or board to be updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the choisen zephyr,ieee802154 from DT as
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the choisen zephyr,ieee802154 from DT as
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Make a library out of the zperf shell sample. This makes to enable the
module in any application, not only the dedicated sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Exclude the non-secure TF-M application from being built by TF-M.
This also stops the building of the tfm_ns_api library that we were
linking against.
This library is defined by the tf-m regression tests.
Add the installed interface source files exported by the TF-M build
system compile them in the zephyr build system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
RT1050 and RT1060 were selecting an invalid number of RX/TX buffers
(below the allowed default). Raise this value for the gptp sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
enable hardware acceleration of ethernet checksum calculation for
RT1050 and RT1060
Performance change (as tested with iperf on RT1050)
TCP RX: 50.6Mbps->52.4Mbps
TCP TX: 49.5Mbps->50.2Mbps
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use systick timer for RT1050 to provide better performance than low
frequency GPT timer
Performance change (as tested with iperf on RT1050)
TCP RX: 49.1Mbps->50.8Mbps
TCP TX: 40.8Mbps->46.2Mbps
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Have the display enabled in devicetree will now get the driver
enabled by default when CONFIG_DISPLAY=y is set. So we can remove
setting driver enabling Kconfig values in various .conf and
defconfig files.
Signed-off-by: Kumar Gala <galak@kernel.org>
The accel_polling sample application supports the adxl372 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The accel_polling sample application supports the adxl362 driver, so we
can remove this redundant driver-specific sample.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This defaults the TF-M regression tests to isolation level 2.
It is set in order to showcase a more secure configuration
by default. The default behavior of the sample is changed in
the prj.conf file. The yaml file which includes the test cases
enables testing for the three configurations: the library mode,
the IPC mode isolation level 1 and the IPC mode isolation level 2.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Default size of BT_RX_STACK_SIZE 1024 is not enough for this sample.
Increase it to prevent stack overflow.
Signed-off-by: Pirun Lee <pirun.lee@nordicsemi.no>
The preferred ipc service on NRF platforms is ipc_service. Remove
configuration for rpmsg_service and just utilize ipc_service.
Signed-off-by: Kumar Gala <galak@kernel.org>
Building for native_posix_64 exposes faulty format strings.
Changes in this commit also ensure that the shell code gets built in CI,
thus this kind of problem can not be introduced again later on.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Remove sample as its only supported on one platform, should really
utilize the ipc subsystem, and so forth.
For now its better to drop it and when we have something better we
can add that.
Signed-off-by: Kumar Gala <galak@kernel.org>
All IEEE 802.15.4 drivers are now automatically enabled if they are
'okay' in DT and all of its dependencies are 'y', including
CONFIG_IEEE802154. This means individual driver enablement is not
necessary anymore in Kconfig.defconfig files or samples/tests. Boards
need to still make sure any dependencies are enabled, e.g. SPI bus in
some cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The magic_want sample requires I2C bus to be enabled (used sensor is
connected to the bus).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a polling sample for 3-Axis accelerometers.
This sample demonstrates how to data fetch and print to the console.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Small update to have the central_multilink sample work correctly
with extended advertising (when enabled)
Signed-off-by: Troels Nilsson <trnn@demant.com>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
samples should not use CONFIG_TEST_EXTRA_STACK_SIZE, instead, they
should set the recommended stack size directly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For further details about interoperability testing please see
* https://lwm2m.openmobilealliance.org/ - Test V1.1 12-Sep-2019
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Make sure that the network interface is up before running the sample.
Otherwise, the sample could stop rightaway due to send failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
First off, fix the FD check when closing a socket - currently not all
sockets were closed on exit (0 is also a valid file descriptor).
Second issue is the use of k_thread_abort() on tx/rx threads. The
receving thread was blocked in recv(), and aborting its thread prevented
it from ending gracefully (i. e. the socket mutex allocated in recv()
was not released as the function did not exit properly). This resulted
on a consecutive `close()` call lock. Fix this by setting a timeout on a
receiving socket, and instead of aborting threads allowing them to exit
gracefully.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The sample has been defining STORAGE_NODE_LABEL to be used
to point to storage partition, but flash_area_offset has still
been using "storage" directly.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Provide common helper functions to create extended extended Zephyr
Fatal Error functionality in HCI common code.
Use the implementation in hci_rpmsg sample.
The sample didn't provide an information about Controllers assert
or system fatal error to an application code while run with nRF5340
SoC. The goal for hci_rpmsg sample change is to enhance user experience
for conformance testing of the Bluetooth Controller while executed with
nRF5340.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The unicast audio server sample did not set a location value,
and would report an invalid value of 0 when read.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds sample application that can be used as reference
implementation and for HAP qualification purposes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Move from using Kconfig GDBSTUB_SERIAL_BACKEND_NAME to a devicetree
chosen property ("zephyr,gdbstub-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Sample has been referencing flash area by its label, but flash device
by chosen `zephyr,flash-controller`, while flash area does not have
to be positioned on a device selected by the chosen directive.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that clock control drivers are enabled based on devicetree we
can remove any cases of them getting enabled by *defconfig and
proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add mps2_an521.overlay so that the example in the README.txt will
actually build. Update README.txt to document needing to have
'zephyr,tracing-uart' property set under chosen node in devicetree.
Fixes#48416
Signed-off-by: Kumar Gala <galak@kernel.org>
Adding the yaml files to sub-applications to avoid bitrot and
specifying the main applications with remote harness instead of
build_only.
Fixes#47613
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
This add a removes the SPI config
for the stm32H735 and stm32H7b3 disco boards
when testing the octoSPI.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that SPI drivers are enabled based on devicetree we can remove
any cases of them getting enabled by *defconfig and proj.conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
In order to keep a flashed sample from provisioning forever, the sample
requires the user to press a button to provision a detected device.
The feature is only enabled if the board has a push button connected
via GPIO.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Flash controller has been specified by `zephyr,flash-controller`
chosen DTS, which does not have to be the same controller as
a flash area exists on.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Due to introduction of alias spi-flash0
sha1: 64fbbd9a44
it is necessary to keep quadspi node
Instead of removing quadspi node, remove storage_partition node
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Sample code uses GPIO api's but wasn't enabling CONFIG_GPIO. So
on native_posix this would cause the sample to not build. Add
CONFIG_GPIO=y to prj.conf to fix this.
Fixes#48306
Signed-off-by: Kumar Gala <galak@kernel.org>
