This adds support to allow any priority from the user instead of
limiting to the protocol values (0-7). This is useful in conveying
custom priorities from application to the driver/chipset.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is handy in testing of setting priority directly rather than
deriving from DSCP. Please note ICMP doesn't use net context.
This is applicable for both shell and API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This change allows to register additional handlers for ICMPv6 so the
user can handle some of the messages between they are handled by the
ICMPv6 module in Zephyr by returning NET_CONTINUE.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
ICMPv6 messages with type < 128 are error messages, where we should not
send back another error. The meaning of the code depends on the type.
Signed-off-by: Andreas Müller <andreas.mueller@husqvarnagroup.com>
Let net_icmpv4_send_echo_request() and net_icmpv6_send_echo_request()
autogenerate Echo Request payload, in case data length is specified but
no data pointer provided. The autogenerated payload includes timestamp
(if payload size permits) so that the turnround time can be calculated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for setting DSCP/ECN values for an outgoing ping request.
Additionally, copy DSCP/ECN values from an incoming ping request into
the ping response, like Linux does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Skip IP header checksum calculation when the network interface reports
support for this feature.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ICMPv6 error messages are not sent (on native_posix) because the first
net_pkt_write() returns an error.
pkt has just been allocated using net_pkt_alloc_with_buffer(). Trying to
write an empty packet in overwrite mode will result in an error. There
is no need to be in overwrite mode, since we want to write the LL
src/dst addresses at the beginning.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
When we are sending ICMPv6 error message, we need to store the
link local addresses of the received packet somewhere in order
to know where to send the new error message.
Easiest is to store the ll addresses is to the error message
itself, just before where the sent packet will start in memory.
We cannot use the original pkt to store the ll addresses
as that packet might get overwritten if we receive lot of packets.
Fixes#29398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Allow for including arbitrary data in net_icmpv6_send_echo_request()
that will be echoed verbatim by the receiver.
This allows to use ICMP echo for diagnostic use cases, e.g. by testing
packet framentation (large payload) or measuring round-trip-time.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
`net_ipv6_finalize` expects packet cursor to be reinitialized in order
to finalize packet correctly. This commits adds missing cursor
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In nbr part, this is a useful information. Since net_icmpv6_input has
already parsed the icmpv6 header, let's get pass it, instead of
retrieving/parsing it again in various handler functions.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unlike before, we allocate a new packet for the reply which is a
modified clone of the request.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to remove the need for macro NET_IPV6_HDR(), since we
don't know in future if accessing the header that way will be valid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is pretty much the same as in ICMPv4. Actually, when it comes to
the ICMP header, it could probably be put in a common places for both
ICMPv4 and ICMPv6.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Function names will be normalized then by the couple create/finalize.
This one only sets the checksum.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was weird to pre-parse ICMPv6 headers in IPv6. Moreover parsing
failure of such header would not generate the right statistic.
Instead, centralizing all into net_icmpv6_input relevantly, and adapting
the test cases which were using that function. In RPL test, removing the
dummy dio test was simpler since dio is anyway tested later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4, ICMPv4/6, UDP, TCP: all checksums are meant to be one's complement
on a calculated sum. Thus return one's complement already from the right
place instead of applying it in each and every place where
net_calc_chksum is called.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
*_ll_src/*_ll_dst/*_ll_swap/*_ll_if were not self explanatory, ll
meaning "link layer" it's ambiguous what the names meant.
Changing to:
*_lladdr_src/*_lladdr_dst/*_lladdr_swap/*_lladdr_if to fix this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Refactor usage of net_sprint_ip*() where multiple
invocations are needed per single log call.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Instead of waiting forever for a network buffer, have a timeout
when allocating net_buf. This way we cannot left hanging for a
long time waiting for a buffer and possibly deadlock the system.
This commit only adds checks to core IP stack in subsys/net/ip
Fixes#7571
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
