Set RTC clock source to the internal 32 KHz LPO. Currently RTC clock is
used to source RTC counter and FTM counter.
Fixes#71289
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
There is no reason to pass addrlen by pointer, since it is a read-only in
the context of sockaddr_to_nsos_mid().
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move the cache size set calls from soc.c do common loader.c
for all related SOCs. Remove unnecessary includes.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add the overlay for the esp-wrover-kit, to drive a character display
based on HD44780 chipset using the I2C bus gpio controller PCF8574.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Test defines a lopback between i2c driver master and nrfx TWIS slave
to verify their functional correctness.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add Kconfig-to-nrfx symbol redefinitions so that TWIS instances
found on nRF54H20 and nRF54L15 devices are supported.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add default configuration related to BLE protocol,
for Application and Radio core on nRF54h20 platform.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
GRTC peripheral is present on nRF54H20,
so the tests should be executed on this target as well.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add support for half-duplex (3-wire) SPI operation using the Raspberry
Pi Pico PIO. To allow control of the size of the driver, including
half-duplex support is optional, under the control of Kconfig options.
The original PIO source code is also included as a reference.
Corrected 3-wire tx/rx counts.
Enable half-duplex code based on DTS configuration
Replace runtime checks with static BUILD_ASSERT()
Remove too-fussy Kconfig options
Removed PIO source per review request
Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
Since `NONE` is a valid option for key management in `connect`
command, we should remove the part in help text which says:
"valid only for secure SSIDs".
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Redundant kLPSPI_MasterPcsContinuous transfer config flag
is eliminated since this is set earlier.
Signed-off-by: Dipak Shetty <dipak.shetty@zeiss.com>
When using sysbuild,
set the primary MCU index to be the app core
only when we are building the test app in the app core.
Otherwise, if the test app is build in the net core,
the test command line parameters won't be sent by default
to it, and tests will fail.
Luckily, these tests are only built in CI using sysbuild
when we target the 5340bsim app core, and in all but 2,
even if sysbuild was used, this setting was propagated
to the zephyr build if we had separate net and app core
images.
The issue was introduced during the transition to
hwmv2.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Submit USBFSOTG_EVT_XFER on halt clear to allow queued
transfers to execute as soon as endpoint STALL is cleared.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Add overlay for nrf52_bsim to the fixed_top test.
For bsim board RTC register address has to be translated.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
UBSan was showing the following error:
```
runtime error: left shift of 137 by 24 places cannot be represented in
type 'int'
```
Cast the value to `uint32_t` to make UBSan happy.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Adds missing overlay and conf for native_sim/native/64 and
native_posix/native/64 platforms.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The comment states the reason for this requirement is to detect
violations by a remote peer. The ATT version of this was removed in
ea04fd95f9. TLDR: It's neither possible
for, nor the job of the host to police the remote device.
We remove this requirement to be more flexible about the number of
priority levels in the system, and to avoid the temptation of using
priorities as a synchronization mechanism.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The configuration file is mostly tested for the nRF53 series
where the controller configuration is usually from the
hci_ipc sample.
This means that the existing audio.conf before this commit
has not really been tested for audio, and were missing a few
configurations to make it work properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
LLD produces warnings about orphaned sections if there are no matching
rules in the linker script:
ld.lld: warning: <internal>:(.symtab) is being placed in '.symtab'
ld.lld: warning: <internal>:(.shstrtab) is being placed in '.shstrtab'
ld.lld: warning: <internal>:(.strtab) is being placed in '.strtab'
Handle these sections when building with LLD to prevent the warnings.
Signed-off-by: Patryk Duda <patrykd@google.com>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies of the base overlay were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During the hwmv1->v2 transition, overlays from a base
board were made to be shared with the variants.
So at that time all overlays for variants which were
just copies were removed.
After that in
https://github.com/zephyrproject-rtos/zephyr/pull/71149
this shared/merged overlay behaviour was reverted,
but not all tests were fixed.
This is one of those. Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The last parameter to getsockopt() should be a socklen_t *
not an int *.
Let's fix it to avoid a build warning which breaks this tests
in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
