- TCP should not be disbled by default for subg in this particular
sample since it is mostly used to test network rather than
performance.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
- TCP should not be disbled by default for subg in this particular
sample since it is mostly used to test network rather than
performance.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Update comment about use of NRF_DEFAULT_IRQ_PRIORITY in
hci_ipc sample for Nordic nRF53x series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add handling of SCK initial value based on the SPI mode used.
If mode is using CPOL then SCK needs to be set.
Fixes: #71154
Signed-off-by: Joakim Andersson <joakim.andersson@heimdallpower.com>
Fix setting of sample frequency.
The nrfx drivers are now using raw integere values instead of nrf
definitions.
Fixes: #71154
Signed-off-by: Joakim Andersson <joakim.andersson@heimdallpower.com>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
on stm32f091 and stm32g071 nucleo boards
This avoids HARD Fault when reaching the last reboot
Disable the external flash memory of the b_u585i_iot02 target
to end the test properly
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It seems that harness_config defined in the 'common' section
is discarded when test adds fixture to it's harness_config.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add nRF54L15 to platform_allow and integration_platforms
in the sample.yaml.
Overlay file for that target already exists in the boards
directory.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
After erasing the sector, compare dat read with expected 0xFF pattern
to decide if erasing is successful instead of relying on the
returned code of the flash_erase function
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fixes some missed renames for overlays with the recent change
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Adjustments of dts and defconfig files to adjust for the MERGE removal.
The revert of MERGE requires specific dts and defconfig files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
LPTIM4 is selected, since it is used only for internal timing
and it doesn't support output/input
Signed-off-by: Adam Berlinger <adam.berlinger@st.com>
An overlay file was wrongly added to a target_sources call, this has
now been corrected.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
For demonstration purposes add a way to capture some arbitrary
data and send it in cooked mode for analysis.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If there are multiple tunnels, then use the tunnel device name
to select the correct one. Note that this tunnel is only used
for network packet capture in this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The CONFIG_MAX_THREAD_BYTES=3 needs to be set for multiple
boards like mr_canhubk3 and xiao_ble when running in usermode.
Too many thread objects (18)
Increase CONFIG_MAX_THREAD_BYTES to 3
Fixes#70955
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The native_posix compilations fail with various socket
errors like this:
samples/net/sockets/echo_server/src/udp.c:45:26: error: implicit \
declaration of function ‘socket’ [-Werror=implicit-function-declaration]
45 | data->udp.sock = socket(bind_addr->sa_family, SOCK_DGRAM,
| IPPROTO_UDP);
Disable the native_posix board from networking samples so that CI can pass.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "frdm_k64f" is referred as frdm_k64f and ``frdm_k64f`` in
places, update them to ":ref:`Freedom-K64F <frdm_k64f>`" or
``frdm_k64f``.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Change 'Hawkbit' and 'hawkbit' to 'hawkBit' wherever
makes sense, and a bit of touch ups here and there.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add harness as twister by default looks into ztest results and
in bluetooth configuration they won't be find.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support for supplying a broadcast code to the
broadcast audio sample, which will, if non-empty, encrypt
the broadcast.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a harness to avoid twister waiting for results on the UART, which
won't happen unless there is a connection established to a remote
Bluetooth device.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
There are required DTS entries to nable peripherals required
for IPC communication between Radio and APP CPUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Adds the device trees, Kconfig, and documentation files.
The following features have been confirmed working on hardware:
* LED
* Button
* ST7735 TFT-LCD
* External QuadSPI NOR Flash memory
* External SPI NOR Flash memory
* USB CDC ACM
* microSD card
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
The thermometer sensor sample application can support any board that
defines the `ambient-temp0` devicetree alias, but the restrictive
`platform_allow` list prevented twister from running on all but two
selected boards. Use a more flexible `dt_alias_exists` filter instead to
allow running this sample on additional boards.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
The VLAN sample application only had configuration support for
the Ethernet interface and one VLAN interface, and left the one
VLAN interface unconfigured. Fix this by adding config support for
all three network interfaces created by the sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
