This option was deprecated for the v2.6 release, and has therefore met
the 2 release deprecation cycle requirements.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fixes: #36558#32577
This commit introduces CMAKE_C_COMPILE_FEATURES and
CMAKE_CXX_COMPILE_FEATURES.
This allows users to use the `target_compile_features()` in their own
code.
In Zephyr, the CMAKE_C/CXX_COMPILE_FEATURES are defined based on the
compiler and the Kconfig / CSTD setting.
Doing so ensures that a user compiling Zephyr with c99 and specifies
`target_compile_features(<target> ... c_std_11)` will get an error.
And similar if building Zephyr with C++ support and c++11, but testing
for `target_compile_features(<target> ... cxx_std_17)`.
For example in the C++ case, the user must ensure that Zephyr is
compiled with C++17, that is: CPLUSPLUS=y and STD_CPP17=y, in which case
the CMAKE_CXX_COMPILE_FEATURES will contain support for C++17 and thus
the `target_compile_features(<target> ... cxx_std_17)` will succeed.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit adds a new C++ compiler property `nostdincxx` which
specifies the C++ compiler flag for excluding the C++ standard library
include directory from the include paths.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the Zephyr build system such that it does not
include the `zephyr_stdint.h`, which tries to define Zephyr's own type
system, when compiling for the native POSIX architecture.
The native POSIX architecture compiles with the host toolchain and
headers, and there can be conflicts if we arbitrarily define our own
type system (e.g. mismatch between the types and the specifiers defined
in `inttypes.h`).
Note that this is not meant to be a permanent fix; instead, it is meant
to serve as a temporary workaround until we no longer need to define
our own type system.
For more details, refer to the issue #37718.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This introduces a dedicated zephyr_library_property() function which
provides a common way to set Zephyr build system known properties on
Zephyr libraries.
As a first common property is the `ALLOW_EMPTY` property which allows
to create a `zephyr_library()` without putting any content inside of it.
In general libraries should not be created unless there are files to
places inside of it, however in some cases there are so many
`zephyr_library_sources_ifdef(<setting> <file.c>)`
where testing each setting before creating the library may not be
desired.
This commit allows the following construct in those cases:
```
zephyr_library()
zephyr_library_property(ALLOW_EMPTY TRUE)
zephyr_library_sources_ifdef(CONFIG_SETTING_1 file_1.c)
zephyr_library_sources_ifdef(CONFIG_SETTING_2 file_2.c)
...
zephyr_library_sources_ifdef(CONFIG_SETTING_n file_n.c)
```
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Zephyr now requires CMake 3.20 or newer.
Let's remove comment regarding ADDITIONAL_CLEAN_FILES only supported
with CMake 3.15 or newer.
Also remove the ADDITIONAL_MAKE_CLEAN_FILES which provided the same
functionality, but only for Makefiles when using CMake <3.15.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is the initial version of a Zephyr CMake linker file for the arm
architecture.
This file defines memory regions, groups, linker sections and symbols
for the arm architecture.
It also sources the common common-ram.cmake, common-rom.cmake,
debug-sections,cmake, and thread-local-storage.cmake.
It configure sections for SoC families using zephyr_linker_sources()
functions:
- nxp_imx
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The current gen_handles.py script uses linker defined symbols.
As preparation for support of more linkers the gen_tables.py now takes
the device start symbol as argument.
For example, armlink and ld uses different symbols.
With ld those can be named explicitly, but for armlink the linker
decides the names.
For ld, Zephyr defines: __device_start
For armlink, the symbol is defined as: Image$$<section name>$$Base
Therefore knowledge of the linker symbol to be used must be passed to
gen_handles.py so that the correct symbol can be used for locating
devices.
To support this change, the creation of the asm, compiler, compiler-cpp,
linker targets has been moved from target_toolchain_flags.cmake to
target_toolchain.cmake.
All linkers has been updated to support the use of the
device_start_symbol on the linker target.
List of linkers updated:
- ld
- lld
- arcmwdt
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Removed stray whitespace in readelf infile and outfile flag.
Some bintools use `--arg=<val>`, others `--arg <val>` therefore the call
at this location should not force a space, as that will fail on tools
using `=`, as this becomes: `--arg= <val>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This allows memory partitions to be put into the pinned
section so they are available during boot. For example,
the stack guard (in libc partition) is needed during boot
but before the paging mechanism is initialized. Without
pinning it in physical memory, it would fault in early
boot process.
A new cmake property app_smem,pinned_partitions is
introduced so that additional partitions can be pinned
if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To ensure that an off-tree toolchain gets the toolchain/other.h header
included, such that it can include the correct header for the
toolchain via the other.h, the define __TOOLCHAIN_CUSTOM__ will be set
when ever the cmake flag TOOLCHAIN_USE_CUSTOM is set.
An off-tree toolchain needs to set the set(TOOLCHAIN_USE_CUSTOM 1) in
the off-tree generic.cmake and/or target.cmake, in order for the
include/other.h to be included. The generic.cmake and target.cmake will
be under ${TOOLCHAIN_ROOT}/cmake/toolchain/${ZEPHYR_TOOLCHAIN_VARIANT}/
As the TOOLCHAIN_USE_CUSTOM is only set for off-tree toolchains, this
has no impact on in-tree toolchains and their functionality.
Fixes zephyrproject-rtos#36117
Signed-off-by: Danny Oerndrup <daor@demant.com>
The gperf generated data needs to be placed at the end of memory
to avoid pushing symbols around in memory, but data in .sdata section
aren't placed currently. Also renaming .sdata section to kobject_data.*
section and add it to kobject_data output section to fix issue.
Fixes#37023.
Signed-off-by: Jim Shu <cwshu@andestech.com>
This is an update to #34289.
When using CMake <=3.18 an interface library may not use the property
SOURCES.
Therefore, if an interface lib is added to the list of ZEPHYR_LIBS, then
CMake <=3.18 will raise the following error:
```
CMake Error .... (get_property):
INTERFACE_LIBRARY targets may only have whitelisted properties.
The property "SOURCES" is not allowed.
```
Therefore the check has been reworked into two steps.
First ensure all libs are static, and if they are, then check if they
are empty and not imported.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This adds dictionary based logging support. Dictionary based
logging is binary based where one big difference is that
static strings are stored as pointers instead of the whole
string. This results in reduced space requirements for
storing log messages in certain scenairos.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to the use of gperf to generate hash table for kobjects,
the addresses of these kobjects cannot change during the last
few phases of linking (especially between zephyr_prebuilt.elf
and zephyr.elf). Because of this, the gperf generated data
needs to be placed at the end of memory to avoid pushing symbols
around in memory. This prevents moving these generated blocks
to earlier sections, for example, pinned data section needed
for demand paging. So create placeholders for use in
intermediate linking to reserve space for these generated blocks.
Due to uncertainty on the size of these blocks, more space is
being reserved which could result in wasted space. Though, this
retains the use of hash table for faster lookup.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Only run gen_handles.py if CONFIG_HAS_DTS is set. This enables vendors
without device tree implementations to compile without the generated
dependencies.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When compiler results are piped through a non-terminal (e.g. ninja)
the compiler disables colour diagnostics. Using `-fdiagnostics-color`
forces the compiler to enable colour output. This flag is always
enabled for clang and gcc.
Setting `CONFIG_COMPILER_COLOR_DIAGNOSTICS=n` disables this
feature and reverts to plain diagnostic messages with no formatting.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
When compiler results are piped through a non-terminal (e.g. ninja)
the compiler disables colour diagnostics. Using `-fdiagnostics-color`
forces the compiler to enable colour output. This flag is set for
clang and gcc when `ZEPHYR_BUILD_COLOUR_DIAGNOSTIC` environment
variable is set when a clean build is started.
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Several driver libraries uses:
```
zephyr_sources_ifdef()
```
instead of
```
zephyr_library()
zephyr_library_sources_ifdef()
```
This results in a messy Zephyr lib as described in: #8825
One reason for drivers to use the first approach is because an empty
Zephyr library results in a CMake build failure which again leads to
twister issues when just enabling a driver and build for all known
boards and then process the DTS result.
Secondly, a CMake build failure prevents the user from launching
menuconfig and disable the driver that creates the empty library.
See #9573 for extra details.
This commit verifies all Zephyr libraries, and if a library is found to
have no source files it will be excluded from the build and a warning
will be printed to the user.
Printing a warning instead of a hard failure ensures that:
- menuconfig can still be opened
- CMake does not fail which allows twister to advance in the test case
- Makes it possible to cleanup CMakeLists driver files
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #33512
The ${ZEPHYR_FINAL_EXECUTABLE}.map file is being renamed at a later
stage.
The renamed, and thus missing file, causes ninja to relink the target
in order to re-create the map file, which then again is renamed.
This is fixed by removing the ${ZEPHYR_FINAL_EXECUTABLE}.map as a
byproduct and only has the byproduct on the renamed file to ensure
proper cleanup, see: #23449.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Since linker_final_pass.cmd is the actual linker script being
used to link the final Zephyr binary, rename it to linker.cmd.
This also renames LINKER_PASS2 to LINKER_ZEPHYR_FINAL simply
to clarify what it is used for, instead of ambiguous pass #n.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The linker script 'linker.cmd' is actually being used for
building zephyr_prebuilt.elf and is not the one used to
build the final binary. So rename it to better reflect
what it is used for.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames the variables related to the generation of kernel
object hashes, and simply makes them more descriptive.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The script gen_handles.py was introduce in #32127 but relies on
ZEPHYR_BASE being set in environment.
However, it is not a requirement to set Zephyr base in the users
environment, therefore this is changed to an argument `-z` or
`--zephyr-base` which will be passed from the build system to the
script.
If `-z` or `--zephyr-base` is not provided, the environment will be
checked for a ZEPHYR_BASE setting there.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add ability to build a UF2 (https://github.com/Microsoft/uf2)
image as an additional output type. This leverages the code
partition offset for the UF2 base address, and a configurable
UF2 family ID.
Includes an unmodified (except for headers for licensing, pylit
disabling) version of the uf2conv.py script copied the UF2
format specification repository, used to convert the bin to UF2.
Origin: UF2 file format specification reference utilies
License: MIT
URL: https://github.com/microsoft/uf2/blob/master/utils/uf2conv.py
commit: 587abb8b909266e9b468d6284f2fbd425235d1b5
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
Following the idiom used for system calls, add script support to read
the initial application binary to identify which devices are defined,
and to use their offset in the device array as their unique handle
rather than the externally-defined ordinal from devicetree. The
device dependency arrays are updated to use these handles.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fixes: #23449
This commit adds additional OUTPUT and BYPRODUCTS to custom command
and targets in the Zephyr build system.
This ensures that files produced during the build will be removed again
when invoking ninja clean / make clean.
The generated syscalls headers include folder is added to the syscall
target using ADDITIONAL_CLEAN_FILES property.
However, this property is new in CMake 3.15, so will not work when using
older CMake with ninja.
For CMake versions <=3.15 the ADDITIONAL_MAKE_CLEAN_FILES property is
used. However, this only supports Makefile generator.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #30591
Now using the `logical_target_for_zephyr_elf` variable for memusage
report.
The `logical_target_for_zephyr_elf` variable will point to the final
elf when two stage linking is done.
On single stage linking the prebuilt target == final elf, in which case
the `logical_target_for_zephyr_elf` points directly to the prebuilt
target.
Thus using `logical_target_for_zephyr_elf` for memusage report ensures
the correct elf file is always used for the memory usage report.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Following the idiom used for system calls, add script support to read
the initial application binary to identify which devices are defined,
and to use their offset in the device array as their unique handle
rather than the externally-defined ordinal from devicetree. The
device dependency arrays are updated to use these handles.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The introduction of Zephyr module glue code in the Zephyr repository
introduces a Kconfig variable in the form of:
`config ZEPHYR_<MODULE_NAME>_MODULE`.
All Kconfig variables go into `autoconf.h`, therefore it is necessary
to sanitize the Kconfig variable, so that it does not contain special
characters. To ensure consistent variable name, then the module name
will be sanitized in all variable use in both Kconfig and CMake.
The sanitization is done be replacing all special characters with an
underscore, `_`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
With the distinction between zephyr_get_compile_options_for_lang() and
zephyr_get_compile_options_for_lang_as_string() regarding list handling
and thus quoting, then zephyr_get_compile_options_for_lang_as_string()
is now used for CMake source file properties for compilation of
kobject_hash.c source file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This adds the common struct fields and functions to support
the implementation of thread local storage in individual
architecture. This uses the thread stack to store TLS data.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix race condition in build when creating libraries in application and
depending on zephyr_interface.
lib/CMakeLists.txt:
add_library(lib STATIC src/lib.c)
zephyr_append_cmake_library(lib)
target_link_libraries(lib PUBLIC zephyr_interface)
Gives following error message:
from path/src/lib.c:6:
zephyr/include/syscall.h:11:10: fatal error: syscall_list.h: \
No such file or directory
11 | #include <syscall_list.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
[13/165] Generating include/generated/syscall_dispatch.c, \
include/generated/syscall_list.h
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove generated files from DEPENDS list of custom commands.
The custom target PARSE_SYSCALLS_TARGET exist for these targets and
is already on the DEPENDS list.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Significant rework of the Intel Audio DSP SoC/board layers. Includes
code from the following upstream commits:
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 25 16:34:36 2020 +0100
xtesna: adsp: use 50k ticks per sec for audio
Audio needs high resolution scheduling so schedule to nearest 20uS.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 24 13:59:01 2020 -0700
soc/xtensa/intel_adsp: Remove sof-config.h includes
This header isn't used any more, and in any case shouldn't be included
by SoC-layer Zephyr headers that need to be able to build without SOF.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat Jun 20 15:42:58 2020 -0700
soc/intel_adsp: Leave interrupts disabled at MP startup
This had some code that was pasted in from esp32 that was inexplicably
enabling interrupts when starting an auxiliary CPU. The original
intent was that the resulting key would be passed down to the OS, but
that's a legacy SMP mechanism and unused. What it actually did was
SET the resulting value in PS.INTLEVEL, enabling interrupts globally
before the CPU is ready to handle them.
Just remove. The system doesn't need to enable interrupts until the
entrance to the first user thread on this CPU, which will do it
automatically as part of the context switch.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 13:57:54 2020 +0300
dts: intel_cavs: Add required label
Add required label fixing build for CAVS15, 20, 25.
Fixes following errors:
...
devicetree error: 'label' is marked as required in 'properties:' in
bindings/interrupt-controller/intel,cavs-intc.yaml,
but does not appear in
...
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:19:56 2020 +0300
soc: cavs_v18: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:12:25 2020 +0300
soc: cavs_v20: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 14:59:23 2020 +0300
soc: cavs_v25: Remove dts_fixup fix build
Remove unused now dts_fixup and fix build with the latest code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:29:06 2020 +0300
soc: intel_adsp: Remove unused functions
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:53:58 2020 +0300
soc: intel_adsp: Clean up soc.h
Remove unused or duplicated definitions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:02:23 2020 +0300
soc: intel_adsp: De-duplicate soc.h
Move soc.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:54:19 2020 +0300
soc: intel_adsp: Remove duplicated io.h
Move duplicated io.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:46 2020 +0300
cmake: Correct SOC_SERIES name for byt and bdw
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:02 2020 +0300
soc: intel_adsp: Build bootloader only for specific SOCs
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 11 13:46:25 2020 +0100
boards: xtensa: adsp: add byt and bdw boards WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 10 10:01:29 2020 -0700
soc/intel_adsp: Make the HDA timer the default always
The CAVS_TIMER was originally written because the CCOUNT values are
skewed between SMP CPUs, so it's the default when SMP=y. But really
it should be the default always, the 19.2 MHz timer is plenty fast
enough to be the Zephyr cycle timer, and it's rate is synchronized
across the whole system (including the host CPU), making it a better
choice for timing-sensitive applications.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:21:43 2020 +0300
soc: cavs_v25: Enable general samples build
Enables general samples build for SOC cavs_v25.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:13:53 2020 +0300
soc: cavs_v20: Enable general samples build
Enable general sample build.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:35:13 2020 +0300
soc: cavs_v18: Fix build general samples
Fix building general samples for CAVS18.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:22:40 2020 +0300
soc: intel_adsp: Add support for other SOCs
Support other SOCs in the "ready" message to the Host.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 13:25:39 2020 +0300
soc: intel_adsp: Move adsp.c to common SOC area
Move adsp.c to common and clean makefiles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 17:18:18 2020 +0300
boards: intel_adsp: Remove dependency on SOF
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 14:29:44 2020 +0100
soc: xtensa: cavs: build now good for cavs20 + 25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 15:57:01 2020 +0300
soc: cavs_v15: Fix build for hello_world
Fix build for other then audio/sof targets.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:50:12 2020 +0300
sample: audio/sof: Remove old overlays
Removing old overlays used to switch logging backend.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 15:02:01 2020 +0300
soc: intel_adsp: Correct TEXT area
Correct HEADER_SPACE and put TEXT to:
(HP_SRAM_WIN0_BASE + HP_SRAM_WIN0_SIZE + VECTOR_TBL_SIZE)
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:44:47 2020 +0300
soc: intel_adsp: Trivial syntax cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:41:07 2020 +0300
soc: intel_adsp: Fix bootloader script path
Make it possible to find linker script if build is done not inside
ZEPHYR_BASE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 12:10:17 2020 +0100
soc: xtensa: cavs20/25: fix build with new headers - WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 13:35:38 2020 +0300
soc: intel_adsp: Fix include headers
Fixes include headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 10:38:50 2020 +0100
soc: xtensa: cav18: updated headers- WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Fri May 1 15:29:26 2020 -0700
soc/xtensa/intel_adsp: Clean up MP config logic
CONFIG_MP_NUM_CPUS is a platform value, indicating the number of CPUs
for which the Zephyr image is built. This is the value kernel and
device code should use to predicate questions like "is there more than
one CPU?"
CONFIG_SMP is an application tunable, controlling whether or not the
kernel schedules threads on CPUs other than the first one. This is
orthogonal to MP_NUM_CPUS: it's possible to build a "SMP" kernel on a
uniprocessor system or have a UP kernel on a MP system if the other
cores are used for non-thread application code.
CONFIG_SCHED_IPI_SUPPORTED is a platform flag telling an SMP kernel
whether or not it can synchronously signal other CPUs of scheduler
state changes. It should be inspected only inside the scheduler (or
other code that uses the API). This should be selected in kconfig by
soc layer code, or by a driver that implements the feature.
CONFIG_IPM_CAVS_IDC is a driver required to implement IPI on this
platform. This is what we should use as a predicate if we have
dependence on the IPM driver for a platform feature.
These were all being sort of borged together in code. Split them up
correctly, allowing the platform MP layer to be unit tested in the
absence of SMP (c.f. tests/kernel/mp), and SMP kernels with only one
CPU (which is pathlogical in practice, but also a very good unit test)
to be built.
Also removes some dead linker code for SMP-related sections that don't
exist in Zephyr.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:41:55 2020 +0100
soc: xtensa: bootloader - use linker script
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:26:18 2020 +0100
soc: xtensa: further fix headers - WIP
Simplify the directory structure, WIP for cavs20 and cavs25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 12:59:30 2020 +0300
soc: cavs_v15: Remove unneeded include
Remove include fixing build.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Jun 7 12:37:35 2020 +0100
soc:xtensa: adsp: remove sof specific code from soc headers
TODO: v1.8+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 23:19:37 2020 -0700
intel_adsp_*/doc: fix duplicate .rst labels
Quick fix purely to make the build green again.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 22:34:40 2020 -0700
samples/audio/sof: use OVERLAY_CONFIG to import apollolake_defconfig
This reverts commit 21f16b5b1d29fca83d1b62b1b75683b5a1bc2935 that
copied it here instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 5 12:34:48 2020 +0300
soc: intel_adsp: Move soc_mp to common
Moving soc_mp to common SOC area, it still needs fixes for taking
number of cores from Zephyr Kconfig, etc.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 16:05:06 2020 +0300
soc: intel_adsp: Move memory.h from lib/
For those files from SOF referencing platform/lib/memory.h we have
include.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 15:20:09 2020 +0300
soc: intel_adsp: Rename platform.h to soc.h
Rename to prevent including it from SOF.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:47:55 2020 +0300
soc: intel_adsp: Move headers
Move headers to more convenient place
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:21:51 2020 +0300
soc: intel_adsp: More SOC cleaning
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Mon Jun 1 15:31:34 2020 -0700
samples/audio/sof: import sof/src/arch/xtensa/ apollolake_defconfig
Import modules/audio/sof/src/arch/xtensa/configs/apollolake_defconfig
into prj.conf and new boards/up_squared_adsp.conf
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:07:40 2020 +0100
soc:xtensa: adsp: let SOF configure the DSP for audio
Let SOF do this for the moment.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:06:20 2020 +0100
soc: xtensa: cavs: remove headers similar to cavs15
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 15:58:38 2020 +0300
soc: intel_adsp: Move ipc header to common
Remove duplicated headers from CAVS to common SOC part
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 13:02:09 2020 +0300
soc: cavs_v15: Remove unneeded headers
Remove also from CAVS15.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 18:34:11 2020 +0300
Remove more headers
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:12:09 2020 +0100
soc: xtensa: remove cavs sod headers for drivers and trace.
Duplicate cavs15 headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:05:12 2020 +0100
samples: move sof dai, dma and clk configs to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 17:38:45 2020 +0300
soc: intel_adsp: Remove more duplicated headers
Remove more headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 2 15:50:03 2020 +0100
samples: sof: remove pm realted files.
Use the SOF versions.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 16:55:40 2020 +0300
WIP: Strip lib from include path
WIP, pushed for sync
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:44:33 2020 +0300
soc: intel_adsp: Remove more headers
Remove even more common headers
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:00:47 2020 +0300
soc: intel_adsp: Remove SOF headers
The headers would be used by audio/sof app directly from SOF module.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat May 30 11:01:26 2020 -0700
soc/intel_adsp: Alternative log reading script
This script speaks the same protocol and works with the same firmware,
but:
* Is a single file with no dependencies outside the python3 standard
library and can be run out-of-tree (i.e. with setups where the
firmware is not built on the device under test)
* Operates in "tail" mode, where it will continue polling for more
output, making it easier to watch a running process and acting more
like a conventional console device.
* Has no dependence on the diag_driver kernel module (it reads the DSP
SRAM memory directly from the BAR mapping in the PCI device)
* Is MUCH smaller than the existing tool.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 28 16:17:51 2020 +0300
Decrease HEP pool size to 192000
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:27:00 2020 +0100
soc: xtensa: cavs25: complete support for cavs25
Builds, not tested on qmeu due to missing SOF ROM (TODO)
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:24:26 2020 +0100
soc: xtensa: cavs20: complete cavs20 support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:22:13 2020 +0100
soc: xtensa: cavs18: complete boot support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:19:23 2020 +0100
soc: xtensa: cavs15: use cavs15 instead of apl as linker soc name
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:16:06 2020 +0100
TODO: samples: sof: work around missing trace symbols.
Disable local trace.
Needs trace updates finished before this can be removed.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:57:19 2020 +0100
dts: xtensa: rename apl to cavs15 DTS
This DTS is used by more than APL SOC. i.e. all CAVS15 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:52:20 2020 +0100
west: commands: sign: Add signing support for other CAVS targets
Sign for CAVS15, CAVS18, CAVS20 and CAVS25 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:50:07 2020 +0100
boards: xtensa: cavs: used Zephyr mask macro
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:49:46 2020 +0100
soc: xtensa: move code to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 26 11:40:36 2020 +0100
soc: xtensa: use SOF versions of clk
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:38:45 2020 +0300
soc: intel_adsp: Send FW ready for non SOF configuration
Configure windows and send FW ready when used without SOF, should be
loaded with fw_loader script.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:02:22 2020 +0300
soc: intel_adsp: Use SOF version of the file
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:47:27 2020 +0300
soc: intel_adsp: Clean up include headers
Remove SOF mentions from the SOC headers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:43:05 2020 +0300
soc: intel_adsp: Move SOF specific code to samples/audio/sof
Move SOF specific code to the SOF sample.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:39:42 2020 +0300
soc: intel_adsp: Use SOF module's version of mem_window.c
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:36:41 2020 +0300
soc: intel_adsp: Use exact copy from SOF module
Use SOF module verion of the clk.c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 14:03:35 2020 +0300
soc: xtensa: Add {SOC_FAMILY}/common/include path
Add ${SOC_DIR}/${ARCH}/${SOC_FAMILY}/common/include path if exist.
Fixes issues for xtensa SOCs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:18:50 2020 +0100
soc: xtensa: cavs common: fix headers for build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:10:57 2020 +0100
soc: xtensa: adsp: add so_inthandlers.h for Intel platforms
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:08:26 2020 +0100
cmake: xtensa: select correct compiler per CAVS target.
TODO: what about XCC ?
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue May 19 14:59:26 2020 +0300
boards: up_squared_adsp: Move SOF configuration to samples
Move SOF-specific configuration to samples/audio/sof prj.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 15 15:29:50 2020 +0300
soc: intel_adsp: Move SOF code to modules/audio/sof
Move SOF dependent code out of SOC area.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 14 17:30:38 2020 +0300
Move task_main_start() to audio/sof sample
Start task_main_start() from main of audio/sof sample.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed May 13 15:37:20 2020 +0300
Rename up_xtreme_adsp to intel_adsp_cavs18
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Apr 27 14:12:59 2020 +0300
Add sample audio/sof for SOF initialization
Add dedicated sample where we put SOF specific initialization.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 18:49:36 2020 +0300
WIP: soc: cavs_v18: Cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:44:06 2020 +0300
soc: cavs_v15: Move soc init to common part
Moving SOC init to the right place.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:02:28 2020 +0300
soc: intel_adsp: Move common part to special dir
Moving common part to common/adsp.c
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 8 14:37:50 2020 +0300
boards: up_xtreme_adsp: Add initial up_xtreme_adsp board
Add initial board copying existing up_squared_adsp board and using
CAVS1.8 SOC family.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 7 15:30:51 2020 +0300
soc: intel_adsp: Generalize bootloader
Move bootloader to soc/xtensa/intel_adsp making it available for other
boards.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:31:00 2020 +0100
boards: xtensa: up_squared: Add support for all CAVS
Add boot support for all CAVS versions. TODO: needs to be made common
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:25:34 2020 +0100
soc: xtensa: intel_adsp: Manage cache for DMA descriptors
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 21:10:50 2020 +0100
soc: xtensa: adsp: use 24M567 clock
Use audio clock
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 10:04:01 2020 +0100
xtensa: soc: adsp: enable system agent
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:03:07 2020 +0100
soc: xtensa: intel_adsp: increase mem pool to 192k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:02:31 2020 +0100
soc: xtensa: intel_adsp: re-enable DMA trace
Buffer will be empty (as trace items sent to Zephyr LOG) but
logic is running.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 11:18:55 2020 +0100
soc: xtensa: intel: dont use uncache region yet.
Some code was still using this region. Use later.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 10:07:28 2020 +0100
soc: xtensa: intel_adsp: fix notifier init
Topology now loads.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:18:38 2020 +0100
boards: up2: Need to use sof config for bootloader
This will need uncoupled at some point. For testing today.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:16:38 2020 +0100
boards: up2: increase heap to 128k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:35:19 2020 +0300
boards: up_squared_adsp: Use bigger HEAP
Use HEAP from old demo.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 16:06:32 2020 +0100
soc: xtensa: intel_adsp: Fix config.h naming collisions
Rename sof version to sof-config.h
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:22:42 2020 +0300
Small cleanups
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 22:00:44 2020 +0300
tests: sof/audio: Test ll scheduler
Add more tests for scheduler.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 18:38:35 2020 +0300
tests: Add first schedule test
Add initial test for testing scheduling.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 29 13:36:23 2020 +0100
soc: xtensa: rmeove build warnings
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 18:04:33 2020 +0300
soc/intel_adsp: Register sof logging
Register sof logging for tracing
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 14:16:55 2020 +0300
boards: up_squared_adsp: Define HEAP_MEM_POOL_SIZE
Define HEAP_MEM_POOL_SIZE when SOF enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 10:09:20 2020 +0300
tests: audio/sof: Add interrupt API for testing
Add initial interrupt API for testing.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 15:54:28 2020 +0100
soc: xtensa: adsp: Update linker script for SOF sections.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 11:20:01 2020 +0100
soc: xtensa: adsp: send SOF FW metadata as boot message
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 26 21:47:20 2020 +0100
soc: xtensa: adsp: re-enable all SOF IP init.
Do all SOF IP init.
TODO: ATOMCTL, WFI on LX6
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sat Apr 25 15:30:40 2020 +0100
soc: xtensa: irq: Make sure IPC IRQ is registered.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 20:56:09 2020 +0300
tests: sof: Enable console
Enable console for the test.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 17:57:22 2020 +0300
soc: cavs_v15: Fix XTENSA_KERNEL_CPU_PTR_SR
Use correct value for XTENSA_KERNEL_CPU_PTR_SR.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 14:48:31 2020 +0300
tests: audio/sof: Add tests for alloc API testing
Add initial tests for allocation API testing. Can be extended for
other later.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 17:49:32 2020 +0300
logging: Enable xtensa simulator backend for ADSP
Enable xtensa simulator backend for SOC_FAMILY_INTEL_ADSP.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 20:58:30 2020 +0100
soc: xtensa: add common cpu logic
Support for additional cores.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 10:11:07 2020 +0300
Update west.yaml to point to the latest repo
Update west.yaml
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:17:01 2020 +0100
soc: xtensa: cavs: Fix build for clk.c on cavs18+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:31 2020 +0100
soc: xtensa: cavs15: removed unused headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:09 2020 +0100
soc: xtensa: cavs25: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:52 2020 +0100
soc: xtensa: cavs20: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:09 2020 +0100
soc: xtensa: cavs18: Align with SOF headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 11:42:39 2020 +0100
west: sof: Updated to latest version.
Now builds, links and runs SOF code (but not to FW ready).
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 19 13:28:53 2020 +0100
xtensa: intel adsp: build in SOF symbols if CONFIG_SOF
Code now fully links against SOF. Needs to be run tested.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:19:28 2020 -0700
DO NOT MERGE: temporarily add thesoftproject as remote for sof module
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:33:40 2020 -0700
ipm: cavs_idc: use the IPC/IDC definitions in SoC
The SoC definitions have the necessary IPC/IDC bits so there is
no need to define them separately.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 14:30:20 2020 +0100
TODO: config: Use static config for SOF module.
TODO: needs to be generated as part of SOF kconfig
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri Apr 10 21:56:07 2020 +0100
HACK: Add SOF into build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:55:15 2020 +0100
west: modules: Add SOF audio module.
Add support for building SOF as a Zephyr module. This is the starting
point for add SOF audio into Zephyr. Currently builds but does not use
any symbols yet.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:48:48 2020 +0100
WIP soc: adsp-cavs15: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:43:44 2020 +0100
WIP soc: adsp-common: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:36:32 2020 +0000
WIP: soc: adsp-common: cache is common across all Intel ADSP platforms
De-duplicate soc.h cache definitions.
TODO: this needs done for other common functions.
TODO: need to fix include path
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:43 2020 -0700
WIP: soc: cavs25: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:12 2020 -0700
WIP: soc: cavs20: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:06:40 2020 -0700
WIP: soc: cavs18: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 12:37:17 2020 -0700
soc: intel_adsp: use main_entry.S in common for cavs_v15
The files are identical anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:38:14 2020 -0700
soc: intel_adsp/cavs_v15: link common code
Let cavs_v15 link against the code compiled under common/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 13:08:28 2020 +0000
WIP: soc: common: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:37:32 2020 +0000
WIP soc: adsp-cavs15: build power down support
Build the power down support for CAVS1.5
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 12:40:17 2020 +0000
WIP: soc: cavs15: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:30:08 2020 +0000
soc: cavs15: Add missing SHIM registers.
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 9 15:43:01 2020 +0000
xtensa: intel_adsp/cavs_v15: fix usage of LP SRAM power gating
Remove LSPGCTL as it can cause confusion, use SHIM_LSPGCTL instead.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Feb 26 15:28:48 2020 +0000
boards: up_squared_adsp: Use local xtensa HAL instead of SDK HAL
SDK HAL is deprecated for Intel ADSP SoCs so fix and use local HAL
module.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 10:45:15 2020 -0700
soc: add Intel Audio DSP SoC family
This creates a SoC family for the audio DSPs on various
Intel CPUs. The intel_apl_adsp is being moved into
this family as well, since it is part of the CAVS v1.5
series of DSPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:29:02 2020 -0700
soc: xtensa: add CMakeLists.txt
Add CMakeLists.txt under soc/xtensa so that CMakeLists.txt
inside each SoC directory will be included, similar to
what ARM and RISCV have.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:43 2020 -0700
Revert "boards: up_squared_adsp: Add flasher script"
This reverts commit 80f295a9dd.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:32 2020 -0700
Revert "boards: up_squared_adsp: Update logtool tool"
This reverts commit 7770d182c1.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:23 2020 -0700
Revert "soc: intel_adsp: Generalize bootloader"
This reverts commit d6a33ef467.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
soc: xtensa; intel: remove sof-config.h - SQUASH
No longer used.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes: #28230
The introduction of CMake SHELL prefix in compile options to avoid
symbol de-duplication caused the build flag export feature to fail.
The export itself works, but unfortunately CMake only strips `SHELL`
prefix for its own compiler invocation, and not when exporting the build
flags.
This causes `SHELL` to be present in the Makefile.exports.<language>
files, leading to problems in external build systems.
This is fixed by using `zephyr_get_compile_options_for_lang()` that
strips `SHELL` and use the returned value for the export handling.
To ensure all compile options has been defined, then the inclusion of
`cmake/makefile_exports` has been moved to the end of
`zephyr/CMakeLists.txt` file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit converts the MWDT bintools implementation from the old
macro based approach and into the new toolchain property scheme.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This command add support for `<command>_flag_final` to all bintools
commands.
This allows users that has special use-cases to use a CMake script
for bintool command execution, and thereby have full control of command
invocation and argument processing.
Example of how to specify the property for such use:
Calling a custom script for elfconvert command:
set_property(TARGET bintools
PROPERTY elfconvert_command ${CMAKE_COMMAND})
set_property(TARGET bintools
PROPERTY elfconvert_flag "")
set_property(TARGET bintools
PROPERTY elfconvert_flag_final -P elfconvert.cmake)
set_property(TARGET bintools
PROPERTY elfconvert_flag_strip_all "-DSTRIP_ALL=True")
set_property(TARGET bintools
PROPERTY elfconvert_flag_infile "-DINFILE=")
set_property(TARGET bintools
PROPERTY elfconvert_flag_outfile "-DOUT_FILE=")
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces disabling of de-duplication for imacro.
Disabling of de-duplication allows for a space between the imacro flag
and arguments.
This allows for broader range of compiler support in future.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
GNU/bintools abstraction completed.
The following commands and flags are now available in bintools:
- memusage
- elfconvert
- dissassembly
- readelf
- strip
The bintools template has now been updated with more description which
will be useful when adding support for more toolchains in future.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add new Kconfig options which depend on CONFIG_BOOTLOADER_MCUBOOT:
- CONFIG_MCUBOOT_SIGNATURE_KEY_FILE: the path to the key pair which
should be used to sign the image, in PEM format. This is sent to
imgtool via 'west sign' when set to produce zephyr.signed.bin and
zephyr.signed.hex files as needed.
- CONFIG_MCUBOOT_EXTRA_IMGTOOL_ARGS: additional arguments to pass to
imgtool.
- CONFIG_MCUBOOT_GENERATE_CONFIRMED_IMAGE: also generate
zephyr.signed.confirmed.{bin,hex}
Add build system support for these options.
This makes a separate 'west sign' step unnecessary when using MCUboot,
if the application image is properly configured with the location of
the key file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit improves Zephyr modules support in CMake.
All Zephyr modules will now have a corresponding
`ZEPHYR_${module_name}_MODULE_DIR` set, regardless of whether they
define a cmake folder in module.yml.
This results in:
`ZEPHYR_${module_name}_MODULE_DIR` defined for all modules and refers to
the root of the modle.
`ZEPHYR_${module_name}_CMAKE_DIR` defined for modules that specifies
cmake in module.yml, or is having both a CMakeLists.txt and Kconfig file
in the zephyr folder.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
